PMDG 737NGX | 737NGXu

Just bought the 737ngx and the 600/700 pack, got given a download link and downloaded an installed them, but i haven't got an email with the activation codes, logging into my account only show a 777 i got for FSX last year? I don't know whats going on but i'm really concerned now. Thanks. Richard Smith.

Hi When i used FS years ago, I didn't have to tune my ILS frequency in when ATC told me the runway to use. However, now I seem to have to be looking it up to do it. Anyone know if this can be fixed? BTW, I'm considering buying FS2Crew - perhaps that will solve it!? Thanks Gary

Hi Some question in the text Since last year I am working on a FS Panel based on PMDG 737ngx but it is flexiable to fly other aircraft as well. My project will be controlled by Mobiflight an Arduino Mega 2560 R3 boards. The devices I needing implement are: Aivlasoft EFB on a second computer with a 22 inch touch screen. 1.) I have a computer based on the Asus E35M1-M motherboard but is the hardware sufficient for the Aivlasoft EFB? Some display for the PFD and MFD maybe the ECIAS display? 2.) How ma ny inch should I need for the displays? The CDU for the aircraft. 3.) What is the…

Hi I've created a flight plan using SimBrief, and loaded it into FSX and PMDG. Other plans that I have done work very well with SimBrief and PMDG. The problem is that sometimes SimBrief generates a severe turn in the plan (see my plan: https://photos.app.goo.gl/hR37w7sLs2rDaycs8 ), and this causes the 737 to go from left to right, over doing it, causing it to constantly to go-over the route so that it has to do another turn back (it essentially oscillates) . It takes some time before the aircraft is doing smaller turns, and eventually on course. I've even tried reducing the bank angle, but it was just a try and didn't seem to help. Anyone can tell me wha…

Can anyone point me in the direction of a Royal Bhutan Airlines 737 repaint? Searched Avsim Library, no joy. Thanks in advance.

Hi, Quick question. I read that I had to use the PMDG Operations Center to download a livery (I was wanting BA at the moment!) for the 737. I can't find that in the Operations Centre, though. Where do I get a new livery? Years ago, I remember downloading them (I think from FlightSim.com, or something like that). Thanks, Gary

Hello, I would like to know if there are Ryanair liveries for B737-700 and 800? If there is none, could PMDG create them? Thank you for your answers. Good flight. Bonjour, J'aimerai savoir si il existe des livrées Ryanair pour B737-700 et 800 ? S'il n'y en a pas, PMDG pourrait-il les créer ? Merci de vos réponses. Bon vol.

Hi I'm looking for a bit of help in regards to some issues I have been experiencing on FSX: SE after installing the PMDG 737NGX. I completed a fresh install of FSX and only added on REX 4 before installing the PMDG 737. I had tested the simulator with just REX 4 installed and everything was working fine with around about 45 - 60 FPS. However after I installed the PMDG 737 I started to notice some strange things happening. All my camera views seem to have gone into fish eye mode and everything looks very strange. My frame rate had dropped to 15 - 20FPS and after about 1 minute of being idle on the tarmac the aircraft started to bounce into the ground as if the g…

Hi To load a flight plan, I use Simbrief, having already got the runway in use at the airport. I load that flightplan into the system, and press the ACTIVATE button, it all seems to work. However, even though I can't see anything I'm missing from the FMC, I can't light up the LNAV or VNAV buttons, as the training videos all seem to able to. My more urgent problem is actually getting the autopilot on. In the built - in 737, I can simply press the z-key, but it doesn't work for me until I'm in the air for some time, flying manually in the PMDG model. The LNAV button isn't as important as putting the 737 onto the standard autopilot, then engaging the auto he…

Ho erroneamente disinstallato il mio 737/800 PMDG dal mio PC, Il sito della PMDG non me lo fa scaricare per reinstallarlo perche mi chiede i codici.

Hi guys, I recently bought two products one from ACE a 737 yoke and a TQ for the 737 and everything working correctly on them however what we are facing is that even with new downloads and fresh reinstall of the pmdg product and no double up in keys or buttons we find that the stab trim dn works fine and up worked fine when we first set the button using FUSIPC however after re loading P3Dv4.2 and using the yoke to test the stab trim up it worked for a second and then it stopped working and now no longer responds on both the yoke and the TQ and only dn works. Is anyone else facing this issue or know how to fix it? i have also tried using p3d button settings and…

Hello guys i have one question regarding my cpu and p3d v4.I use AMD fx8320,also I have 8gb of RAM and a ROG Strix gtx1050 O4g.I've noticed that when I fly pmdg737 in 2d cockpit I time to time get green blue and other collors which is weird.In the VC as well when I look near the panels i have some white flashes,same happens when I look outside of the aircraft.Regarding default aircraft I've got no problems in VC but when I look outside I've got the same problem with that flashes especially when I look towards water.I will be getting a new PC but not soon more like in 2020/2021.With version 3 I didn't have those problems.Should I switch back to v3 till I get new PC? Ma…

Hi I'm still an early learner so sorry if I'm asking a stupid question. I'm buying one piece of software at a time, and after buying the 737, I want to buy something that will enable me to do flight planning. I watched Doofer911 video that helps you understand SimBrief, and that sounds good - I see you download the plan and put it into the "C:\Program Files (x86)\Steam\steamapps\common\FSX\PMDG\FLIGHTPLANS\NGX" - directory. My question is; how do you get this working with FlightSim itself? The built-in air traffic control are going to need this too, so where do I put an identical flight plan for this route so that I can fly the route? When I'm setting up…

Hi, Recently I've been playing around with some settings in the PMDG 737, and I tried to get the engine option/N1 callout, at which R-TO, R-CLB, etc. is indicated on the Engine display instead of TO 1/D-TO 1, etc. Now, the way I see it, is that this should quite simply change if you disable "double derate", as according to the PMDG FCOM 2. "[Option - without double derate] Thrust mode display annunciations are: • R-TO – reduced takeoff • R-CLB – reduced climb • TO – takeoff" (page 325). However, the only difference I've seen by doing this is so that only 26k and 24k (in the -800) are selectable options in the FMC, which is correct, however the N1 is still…

Hello, After I load a flight plan into my 737, my windshield goes black (cannot see anything outside) when I switch to cockpit 3D view. This is the only view that suffers this problem. It is the view that I use most however. The plane is new, and I did try to reinstall it with no luck. Anyone have a fix for this? Thanks!

Does anyone know of a Western Pacific livery for the 737-700?

Hi I have just bought the 737 and I'm following some very good information on YouTube for go through training. I am having a technical problem, however. The aircraft was installed correctly, and when that happens, I can use it a couple of times. However, after my 2nd startup of the flight (from the Load menu), if I choose the PMDG 737 it goes into a violent stutter when the flight is loaded. Despite everything is turned off, you can see that it is trying to move forward (and it does slowly). I have been into the menu and told it to start up cold and dark, and I don't know if this is causing the problems? Please can anyone help, because this software is u…

I have a interesting problem with both the 600 and 700 series. Shift 3 does not open window 2 (CDU) using keyboard. All other 'shift - numbers' work as expected. It works fine with the 800 which is more confusing since the 700 Panel Config is aliased to the 800. Uninstalled and re-installed the 600/700 series I have reinstalled latest FSUIPC, deleted 600 and 700 key assignments in the FSUIPC init file. The only other program that has caused 'weird' stuff in the past is EZCA2 but I'm reluctant to reinstall. . Has anyone seen this before or can suggest a solution? Thank you in advance. Bob

Hi all after purchasing PMDG NGX 737-800/900 for fsx steam, the aircraft sometimes doesn't load right in the sim. In cockpit view, all screens will be switched off and the mouse won't operate the switches and you have no control over it, also, normally upon loading, the first few seconds the aircraft will initialize settings, then it will work, but sometimes they won't and this is when it doesn't work. What does makes it work is re-installing or repairing the add on, so not ideal and a bit frustrating for an expensive add on. Thanks

I purchased the Boxed DVD version. How do I update the software to the latest version? I have logged into my PMDG account, but as I purchased this on DVD it's not listed. Thanks Darren crosby

First of all I want to thank you for your help and ask for forgiveness for my English (I am Spanish) My problem is the following. I made the landing gear myself for my 737 PMDG home cabin. I used several imternet tutorials and the electronic part was made with two switches. They are connected to a master card in their respective inputs and it is to a USB Y card to the PC. I have checked everything with sioc monitor and mark the entries well. I have also tried the train with FSX the iFly737 and everything works fine. The problem comes when loading the 737 PMDG. It does not work .... When raising the lever the red lights are lit for a second and ret…

In fsx, when I reach 33,000 feet, there are i think four pink parachute things that teleport themselves to the plane's position every few seconds. Does anyone know what these are? If you need the addons I have i will try to list them. I can send a pic too. Thanks! Fred

With my 737NGX, when switching to another view, the autopilot occasionally dis-engages. How can I prevent this happening?

Hello! When i retract my gear on my PMDG 737NG, the left PFD freezes, and the gear won't go up. Who knows what is happening here? Thank you!

Hello there hope everyone is doing fine...I was recently flying the pmdg 737-900 the strange thing started happening this week....sometimes not always after taking off I retract the landing gear so the lever will go up but green and red lights will go on and the gear won´t retract added to that the displays FREEZE...When i press the G button again to lower the landing gear the red lights go off and the displays go back to normal again but the problem is that I can´t fly with landing gear down and when I retract the displays freeze...How can I fix this issue? I tried repairing but the same issue is happening and I don´t know the reason..sometimes it works normally others i…