PMDG 737NGX | 737NGXu

I people! I´ve some questions about a repaint 737NGX! 1. I would like to customize the color of the ground support equipment (GPU, LPU, etc) what is the texture that can replace the default white by the standard gray of GOL Brazil for example? 2. The levels of the airstair which is the texture that I can paint in the colors of the company? I´ve used google traslator for write here, sorry about anything. Tks by attention!

Hello, Sorry, maybe I missed this and was already asked! I would like to know if PMDG is going to put in the NGX service pack 2 some of the really nice features that are in the T7?? Like the cool landing lights T7, the 3D engine sound, and maybe if possible better framerates? I don't know if this is possible. Robert

Hi guys, Every time I insert performance data after a routing, I get the message "Unable 250kts by XXXX" in the FMS. I can't find a post on the forum or the FCOM and wondered if someone could tell me the exact repercussions of this message. What am I doing wrong, if anything? Is it suggesting that the cruise level for the flight is too high and that, even with speedbrakes, the aircraft will never reduce to 250kts by 10,000ft? It can't be that because I recently did EKCH-OMDB in the 737 and still got the warning. Perhaps it is suggesting that the altitude constraints in the STAR are too close together to reduce to 250kts? Not quite sure. Is there anything I can do to a…

Hi, I reinstalled my PMDG B737 a few days ago after a repair are on my computer. The installation of the PMDG 737 went very well and I have already test been flying on VATSIM and everything works except for one feature. When I will start the pushback and go to the FMC and the "Action" nothing happens when I press "START". No sound/communication from the ground crew or the aircraft starts moving backwards. Is there any setting in the FMC has not been done/installed or what is it that is not prepared. In my previous installation so everything worked out splendidly. I have tried so many things now so I have no more ideas to hands. Please anybody know! Regard…

I have edited and started to create my own personal plane with success. I have a nice working model. When I got to the PMDG_NGX_VC_N_NUMBER.dds file, it shows a partially locked layer. I assume this is an ALPHA channel. How do I edit and save this properly? (I am using PS Elements 9)

I My system crash, several times. So i install FSX several times. Now the code for activation that i purchase don't allow me ac tivate the product.. Someone can say me how can I do ? I don't see a link to contact PDMG LLC... Thanks for your Help. ED.

Hi all The problem that i'm having whilst flying the NGX is that it gets rid of my FSUIPC from the addon tab at the top of the screen :huh: Any ideas why?? Thanks Mark.

I My system crash, several times. So i install FSX several times. Now the code for activation that i purchase don't allow me ac tivate the product.. Someone can say me how can I do ? I don't see a link to contact PDMG LLC... Thanks for your Help. ED.

Dears, few months ago, finally I decided to buy the nice PMDG 737 800 NGX. Plane is really nice and simulated very well but using it with win 8.1 always FSX goes to close when the flight is over and irreversible error is displayed. Then every time the FSX is automatically closed and if I wanna start another fly I have to open it again repeating the start up procedure always and always. For you note my I bought also new laptop with I7 processor and Nvida graphic card with 4GB memory. I also tried to change configuration in the FSX but no way...once I finish the flight and I try to go back to main menu the FSX goes in error. Does someone help to fix it ? I am really t…

So I am playing with the 700 series add-on for PMDG and I have a couple of questions that are probably answered somewhere in the 3000 pages of manual but I want to make sure it is not a bug and see if anyone else has the answer right off the bat rather than searching for hours in a book thicker than the Bible. SEE IMAGE BELOW. CLICK ON TO FULL SCREEN IT. 1. When I turn on the lighting for the cockpit and turn it just past halfway the back panels on the MCP LEDs turn blue. Is this normal ops? It never did this in the 800 series. 2. The TCAS Indicators never went away on the MFDs. The indicators were on during power up, pre-flight check and on into the f…

I recently uninstalled and re-installed FSX due to issues with FSX. When I opened FSX and selected the 737-900 Winglets, the gauges were blank at first. Did an uninstall and re-install of the 737-800/900 SP1c package and now I have gauges with no information (ie.: letters and numbers). I was using the base aircraft then the UA livery from the PMDG site. Same problem. I'm not very technical but if you go slow and explain, I can work through it. Thanks, Vinnie Covino

Tried input FAJS into FMC it says not in the database

Is there any chance we 737NGX'ers may get an ASN integration of weather radar image in the ND of the 737 similar to that of the 777 ? Pleeeeease PMDG ! that [WXR] key on the MCP is sooo lonely nowadays :blush:

Guys I need to get my head around what I am about to do...I have the Saitek X65F force sencing joystick & dual throttle, I have percevered with it since release of the NGX but although the dual throttle is great I just cannot get on with the "non moving" joystick, it has really been a nightmare (I guess it is like marmite-you either love it or hate it) and I hate not having movement on my joystick for take off and flare etc.So...after extensive negotiation with "Santa's little helper"...aka "The Wife" it looks like I can spend some more dosh on a Hotas Warthog and I guess e bay my X65F (mad I know, expensive mistake!)Before I rush out and grab the Hotas Warthog I wond…

Today I wanted to do a flight but I noticed that a red X appears on the PFD, I know it appears when you press the test button on the TCAS but I didn't press the button and it is like that on every one of the 737s I tried everything to get it off but I can't seem to figure out what went wrong can some please help me with this.

Greetings All, When I switch on the HUD there is a blank screen - no data. It was working OK before I uninstalled Eaglesoft Citation X which would not work for me. I did the repair in the PMDG 737 NGX install application, to no avail. I then ran the Modify in the PMDG install application, again to no avail. Is there a solution to this problem without me having to uninstall and reinstall? Please help me. I have had nothing but sheer delight with this aircraft so far. Thanks in anticipation TOM

Hi guys, have a question about setting up my joystick (Saitek X52) for the NGX on Win8.1. I've confirmed that I do randomly have controller dropouts on 8.1 even with the power options set properly so I was going to use FSUIPC to configure the stick instead of the Saitek profiler software. I'm concerned though because I've seen a number of posts saying the NGX doesn't like it when axis' are configured through FSUIPC. Obviously I can't leave them configured through FSX though because that won't fix the disappearing act. I've noticed there are two options in FSUIPC for handling axis' though. I can either send it to FSUIPC and calibrate it through there, or I can se…

This might be worth watching for some of us avid NGx pilots. :smile: https://www.youtube.com/watch?v=GvcrhoMHFns

Does anyone know of any good Delta liveries for the -700 and -900? Thanks.

When I'm picking a runway on the arrivals page in the FMC the available STARs are automatically filtered only showing me STARs connected to the selected runway. However when picking a runway for departure during preflight the same is not true for SIDs but instead all of them are displayed ragardless what runway I've chosen for departure. Is this the same way it's working in the real NG that only STARs but not SIDs are filtered depending on what runway you've selected?

You learn something new every day: :( http://www.pprune.org/dg-p-general-aviation-questions/425110-flashing-qantas-tail.htmlhttp://www.pprune.org/tech-log/95346-737-pulsing-landing-lights-swa.html http://www.youtube.com/watch?v=0anXRKcBvQc

Hello everybody! I'm almost flying the 737-700/800 for a couple of years now and it is still one of the most interrested flight decks in the world. Yesterday I was studying the flight controls of the 737 for an aviation assignment. So I used the NGX to cover the most realistic views. When I was working on the flight controls inputs I noticed that the yoke movement simulation in the NGX does not turn a max of 90 degrees. It stops at 45 degrees. - 1:51 -> yoke movement KLM 737 - EHAM In this video I mentioned that the flight control check is done where the yoke is turning fully right and left in a 90 degrees position. Is this an option for airliner…

I need a little help from a few "upper atmosphere" experts. Here is a synopsis of my problem. This just started yesterday, and I havereached the limits of my troubleshooting abilities.After purchasing KFLL and GSX from FSDreamTeam, I set up a short circuit from KFLL to KMIA to practice varying flight scenarios in arepeatable manner. When I configured the airplane exactly as I needed, I saved the panel state using the FMC, as I have done ondozens of other occasions.When I pressed TOGA, everything looked good until I was airborne when the plane veered hard to the right. It was unrecoverable. Ireloaded the flight and saw the problem.The yoke was hard over right and woul…

hi for some reason on my airspeed would not come alive during takeoff and im not sure why, my ground speed was above 45, but my indicated airspeed did not move. any help appreciated.

Not sure why this has happened, all of a sudden i have lost textures on my plane when i open the doors. https://www.dropbox.com/s/pv0cqjznx1supsb/2014-10-27_15-47-28-529.BMP?dl=0 https://www.dropbox.com/s/tx1x6x1bsl0vk3y/2014-10-27_15-47-43-407.BMP?dl=0