PMDG 737NGX | 737NGXu

Hi Guys, Do I remember A while back that the shape of the top edge of the pilots windscreens were to be changed, ie levelled off a bit instead of being turning up at the edges, to look more realistic? Cheers, Mal...

Hello ! There is a way to edit/crop the backgroup of the 2D main panel ? I would like to use it undocked and crop it just on the top of the MCP. Thanks for your help guys ! Ben,

Hi, I recently noticed my livery manager wasn't working well so I decided to do reinstall. After uninstalling, I realised that it did not delete the livery manager so I deleted it myself. I freshly downloaded a new copy from the PMDG website after the Operations Center informed me of a new update. When I reinstalled, it did not restore Livery manager. I have tried reinstalling more than 3 times now with no success. Someone please help!!?? I need my PMDG!! Thanks, Aaron. Flight Sim: FSX Acceleration Operating System: Windows 8.1 Aircraft: PMDG 737NGX for FSX/FSX-SE

Hello there, I'm running the 737NGX FSX:SE, on a windows 8.1 computer, with the latest version installed. I'm always able to load a game, or start a new one from the start screen, but every time I try to load a new game, when I'm already ingame, the program always gets a fatal error and crashes. Anything I can do to fix this?

As the title says my weight is 59.2 GW Flaps 15 vref is 148kts but on my Flap Maneuvre Speed for the 800 is F15 Vref 40 + 20 = 153 I'm on approach at F15 gear down all that good stuff at command speed of 153 kts. So why does it drop 5 kts. I know its adding wind cor of +5, but shouldn't the speed be like on my chart 153kts for that weight and also the green bug weight on my speed tape which is 153 for F15. So why not vref 153 + wind cor Regards

Hey guys, Might be a silly question. But in P3D, in many pictures and videos i have seen, on the overhead the Cruise ALT and Landing ALT. The numbers that are shown eg - 38000, in videos the font has been much much larger. But in my sim it seems that i have the same old font size as it has always been. I actually like the look of the large font. Does it mean maybe i havent installed the ngx properly? Cheers

hello all I recently read a post from Kyle that to fly more realistic, you should press the Autopilot disc button 2 times. But, I have a few questions about that. is there a key assignment, pure for disconnecting? -And, that is how it is done after touchdown? After the roll out is done? -So, what I do now (just moving the controller to the left till ti disconnects) isn't right (realistic)? -And will it work in the 777 (so I don't have to press the invisible click point)? vkr victor roos ps: just found this.. I'll take a look at it now How does that differ from the 777?

Is the an upgrade path to the P3D B737 is you own the FSX version?

Dears, I just got a problem in my PMDG 737 NGX. I was ttrying to download new livery from PMDG web site but it seems that for 737 they are no more availalbe on it. They just said to use the operation center on the main menu...sorry but I do not know what is it since i have no such tool in my menu...I am using the SP C...pls help. Thanks !

How can I set up the NGX FMC so as when entering a co route on the route page I can see a drop down list of all the saved routes in the folder PMDG/FLIGHT PLANS/NGX.Thanks

I am getting inconsistent results with auto throttle speed control upon glideslope capture. When in VNAV and selecting APP I obtain VORLOC and then G/S and the speed is controlled properly with auto throttle. When using the MCP to hold altitude and control speed until I get to the IAF I get inconsistent control of speed upon glideslope capture. There are times the speed is controlled in the same way as when I enter via VNAV and other times the speed control window flashes and the speed is not controlled. I am not totally sure what the proper operation is so don't know if this is a bug or my lack of understanding Kevin Wilson

Aaaarrgh !! Sum Ting Wong After flawless NGX operation for the longest time, I go to fly today and, out of nowhere, I have a serious problem. Every time I enter the runway number in the route page, it responds "not in data base". This happens on practically every airport, although there are some that work fine. I haven't been able to determine any sort of relationship between the airports that work, and those that don't. I don't know if this is an FSX problem or an NGX problem. In fact, I know nothing and have no hope of figuring it out on my own without further jeapordizing my sim. Help, please.

Bonjour, Does anybody know why it is impossible to engage LNAV on ground if the first leg's course is more than 5°away from the runway heading ? What is the technical reason hidden behind this. Thanks Best regards Claude

Hi guys, I saw on PMDG website that the PMDG 737 NGX base pack includes now within the features a "weather radar". I downloaded again the product, but still there is no weather radar as in PMDG 777. Is this working at the moment? Thanks for any info!

What model is the NGX now using from the update? I looked everywhere but can't find anything

Hi out there, what is the correct installation of the current NGX update. A deinstall with a fresh reinstall or is it ok to install the update over the exisitng version of the NGX? Thnx Tom

I was flying BOS to IAD today and while programming the FMC for a SID I got a "Program Pin Error". The FMC remained operational except I could no longer choose any SIDs or STARs, the only option was FMC <Act> displayed. I never had any issues in FSX's version of the 737 but I recently switched to P3D and its the first time I've seen this. Did I miss a step or is this a bug?

ILS freq/HDG at KDTW (example) KDTW has two approaches for rwy ILS 4L ( Y and Z) and two ILS approaches 22R (Y and Z). Each can be selected in the CDU ok. The actual approaches (waypoints/transitions) for all 4 approaches show up correctly but the Freq and headings do not change (Apr Ref page) for the "Z" approaches.

If I were to purcahse the NGX from another source (e.g. aerosoft shop or flightsim shop), would I still receive the same support for it (service packs etc.), use it with the PMDG operation centre? -Regards TMflyer.

How do I download the service pack sp1 to run PMDG 737NGX with FSX Steam. I purchased the package (CD) from flightstore and have a registration key but the PMDG website seems to want me to re-purchase the whole package again as a download - confused!!!!!!!

I have problems with what is stated on page 118,namely Press DEP ARR and select LOWI ARRIVALS page. Select Runway 08. I assume they mean rwy 08 and not RNVY,RNVZ. I then select rwy 08. According to the tutorial I have to press LSK 3L to copy RW08 and then press LSK 1L to enter a direct to. And here is my problem: Pressing LSK 3L indicates a Star,called Elme1A. What did I do wrong ? What was I supposed to do ? By the way : I am soon coming to a point where I give up. HubertWerni NB: With tutorial #1 I had no problems.

Hi I used to use 737ngx in fsx and was perfectly fine and no issues however I removed fsx and installed FSX SE as well as latest update of PMDG 737NGX for fsx SE downloaded from PMDG account couple of weeks ago. I program the route perfectly in fmc but during the descent when I extend flaps to 5 speed automatically change to lets say 200 and that speed I can see in PFD but if look into the fmc it is 240 for that waypoint if I extend more flaps speed drops more and I can see this changed speed on top of speed tape in PFD where as in FMC its 250.or 240 which ever is programmed I did 3 different routed and same issue. As far as I know speed in the pfd should be the fmc pr…

On the fix page do you enter the ICAO airport and insert a 25nm ring for the MSA? Because i've seen charts where for the MSA circle its related to a VOR or NDB. So for example if your at an airport your origin and you have a MSA with the VOR in the circle, lets say its called TLA would you use that for the fix page for the MSA or still use the airport ICAO for the MSA? And also for the DEST? I know for distant rings to the runway i enter the RWXX from the legs page to the fix page. But i'm just unsure about the MSA. What is your procedure or correct procedure?

Is there a cargo only version or cargo repaint? I somewhat despise passenger operations because they make me feel like a bus driver.

Hi guys, Returning to the NGX after a break. I have SP 1c installed in FSX, Windows 7. I see to install a livery I need the Operations Centre To get that I need SP 1d. So I downloaded the latest installation file from the PMDG site. I extracted the three files in the package: PMDG 737 8900 NGX Base Package FSX and the two readme's The non-Steam readme tells me it's v 1.10.6461 24 March 2105. When I run the installation exe, the InstallShield wizard displays the Repair or Remove window. That doesn't seem right, but I select Repair and continue the installation. When done, I start FSX and load an NGX flight. Now, Add-On > PMDG > About tells me I ha…