PMDG 737NGX | 737NGXu

i have problem with 737NGX, it always crash to desktop when i am enroute, mostly between 2-4 flight time. event viewer says that it is caused by KERNELBASE.DLL strange is that i can fly 777-300 from PMDG for hours, doing lot of longhauls with absolutely no problem, i did 15 hours flight,9 hours flight with no issues, i get CTD only with 737NGX... anyone has an idea how to fix it? i googled a lot but nothing helped... everything is up to date, Windows, all addons i use : 4970 k titan x 16gb ram 400gb HDD Intel 750 saitek x52 PRO Windows 10, 64 i am on Prepar3D v3.1 active sky next precipitFX immersion rex4 textures rex4 soft clouds FS2Crew FT…

Hope you can help, when I go to load a flight with the NGX, at any airport, and I get a warning pop up that states NAV HASH INIT: INVALID LATITUDE. It has a cancel button in the warning box, but it just freezes up and doesn't allow me to proceed any further. I am running windows 7, FSX, and Active Sky next. I have the latest FSUIPC version, my navigraph is up to date, and it is only with the NGX, it has got me stumped. Any help would be appreciated. Cheers Phil Duck

Is there any way to adjust the transparency of the CDU?

Hey guys, With my NGX, it seems when i apply and take the parking break on and off there is no noise effect. Any reason why this might be? Everything else seems to be fine. Anyway i can resolve this problem

Hi All, Been using the PMDG a/c on and off for several yrs. Had the B737NGX installed on my WIndows 7 PC for about 4-5 yrs now. Recently upgraded to Windows10 - doesn't work perfectly but good enough. When I started up my FSX for the first time in ages after the upgrade and tried running the PMDG 737NGX (had all the patches up to about a year ago) it keeps asking for my activation code (which I put in and it was happy with), after which I could never get the engines started (not sure if it was me, but I followed the proceedures I knew worked in the past - nothing just keeps spooling up but adding in the fuel flow it refused to spool up). But if I close down FSX and …

I know it's been asked a lot, I apologise, but I'll be more specific here. Anybody with 4790k & GTX970 using NGX for P3Dv2? How is the performance, FPS? Are you using it regularly and enjoying it? Any crashes, OOMs? I recently switched to P3D but I don't want to make the same mistake I'm doing every time I move to newer version of FS.. I just begin to enjoy smooth FS experience (my FSX is now perfectly smooth) than something new comes along (P3D), I switch and than find myslef in the same low FPS, stuttering mess all over again. So far P3D is performing nicely apart from microstutters which could be eliminated with the working 1/2 refresh rate sync (some day, I h…

Hi all, have had this twice now, since installing SP1d. never experienced it before now, although I searched and found ref to it happening in SP1c. I was making a vid when it occurred, so the steps I performed are before it happened are easy to follow. It now appears to be happening all the time at LEPA. Will try a different airport to see if it's AIRAC related. Please advise if I should enter a ticket. Mike Collins [sharedmedia=videos:videos:355]

Purchased the 737 600/700 Expansion Pack last night. When I try to install it I get the following message from HitmanPro Alert: InstallScript Setup Launcher 1.10 has been terminated to prevent execution of malicious code! I've tried re-downloading today. Has anyone else had this problem? I can't believe there is something wrong with the installer file and perhaps HitManPro is being overtly sensitive. But I've yet to have it flash a warning with anything else.

I am having problems with some of the click points in virtual cockpit. cockpit mode The center button to change to Standard pressure, the Nav switch button and others sometime do not work. It gets fixed by re booting Prepar3D. Does anybody knows what it is due to? Thanks Juan G. Ducaud

Hello, I have been flying the B737 for a number of years. First with the PMDG 737 for FS9, Then Ifly B737 NG for FS9 and Prepar3d V2.5 and lately the PMDG 737NG for Prepar3d V3. The planes flies incredible, what a difference from the old FS9 version. One problem that I am having is that right after landing when I am taxing out of the runway and using the pedals. The rudder get a full deflection to the right without input on any of the pedals. The left pedal works and turns the rudder to the center and left, but the off position always comes back to a full right rudder. It only does this right after landing. It I start a new flight, is perfect while taxing for takeoff…

I know rudder pedals move the steering wheel by 7 degrees and that steering wheel can move the front wheel by 78 degrees.... I have 2 joysticks, and I want to use one of them only as a steering wheel. And I want to disconnect the rudder from the steering wheel... Can I do that in P3D?

Bonjour, I noticed that sometimes after landing the elevator doesn't work proprely. (737NGX 800 Steam ) For example when moving the joystick it doesn't stay in it's position and return to the center. It is particulary true when in abutment . This only happens on the ground after landing, and if I do a touch and go, as soon as the plane took off, the joystick behavior is again correct. I made somme test after disabling all my addons. The only way to recover a correct behavior is to stop the engines and then as soon as the ground power is connected, the joystick (elevator)works without problem. Now I find that it only occurs if I use the APP mode during approach. If…

How does the weather radar works in combination with ASN. Is it simply install the radar in the 737NGX and press "shift 5", or is there more to say about it? Jos de Hart

Hi I rotate the Background and AFDS Flood lights switch and nothing happens. Is there something else I need to turn on to get these to light up.? I use p3d 2.5. thanks Paul Burley

Hello, Is already known, when the service pack SP1D for the 737 NGX generation is available for CD/DVD customers? Jos de Hart

1) Is there any difference between the landing distance on a dry and on a wet runway in Prepar3d? Or is the "wet runway" only a visual effect? 2) On an icy and wet runway, is the landing distance grater than on a wet runway in Prepar3d? 3) If not, is there a software that REALLY can take these variables into account and simulate these frictions in Prepar3d? Thanks

Hello, during the flight from Tutorial 2, I am not able to do any FMC route modifications as outlined in the manual page 94ff. For instance: Trying to line select the second waypoint (TESGA) on the LEG page in order to make a shortcut by copying on top of the currently active waypoint doesn't lead any change. No error, No invalid entry, etc. The ACT RTE does not change to MOD RTE, where I can execute the modifications. Maybe there is one difference about my approach doing the tutorial. I started from a saved flight included for the second tutorial "PMDG....before pushback". At the second attempt, I additionally loaded the according panel state within the FMC in ad…

In looking at the wing from inside by moving back through the cabin via EZDok, the wings looks only partially assembled. There are no flaps on the trailing edge and the slats are missing on the leading edge. I don't know how to post a shot to show. Any ideas? Thanks.

Is there any way to set the random failures to less than 1 per 10 hours? The way I look at it, it is not realistic to encounter 1 failure (that could be anything from a failed lamp to a major engine fire) every ten hours of flight. I have already turned on the service based failuers, but I think it would add more realism if other systems could fail as well on random, but not as often as once per ten hours. I tried to type 0.1, 0.01, 0.001 and such in the CDU where you type in the events, but that only gives me a 0. So, maybe there is no way to have less than 1 fail per 10 hours? Anybody knows if that is possible? And if it is, what would be a realistic setting…

Hi, I have the problem that the HGS gets truncated by the dashboard in the lower right. The wipers are correct behind the combiner and dont interfere. But the part of the dashboard below the wiper is visually behind the combiner, but blocks the green font. I can make a screenshot if it helps. I found an older thread from 2012, but I think there was a problem with lights: http://www.avsim.com/topic/377631-hud-image-partly-hidden/ I´m using the P3D version with P3D 3.1 Regards Matt

Dumb question. To install SP1d do I have to first uninstall my current version? The only options on the SP1d installer is repair or uninstall. Hal Watkins

I have encountered an issue with the NGX. When I connect to VATSim via vPilot, everything works. It makes that sound when you connect to frequencies. I can hear other people's transmissions, I can hear the controller, but when I try to make a transmission, the controller cannot hear me. vPilot says that I am pressing the key to make a transmission but they can't hear me. This happens when I am on FSX:SE. I do have both FSX Boxed and FSX Steam on my computer. I just realized that I accidentally posted this topic three times. I am sorry for any inconvenience I may have caused.

I'm using a Hotas Warthog throttle. After re-installing my 737 NGX for P3D in P3D v3.1, my throttle starts reverse thrust when pushing the lever forward. Pushing further will solve the problem, but the throttle-handles show strange behaviour in my VC as well, no smooth movement. I do not have this problem with the PMDG 777 or any other standard aircraft. Calibrating the throttle didn't solve the problem. I have a registered version of FSUIPC as well. Should I delete the trhrottle-assigment from within the control-function of P3D? Or should I delete it from FSUIPC? Or should I try re-installing the plane all over? I'm using Windows 10 64 bits

Hi, I have the problem that the NGX is not being recognized correctly in OC (see screenshot). Since this system has no FSX installed (and never had), I guess it's some registry entry / directory that makes OC think that there is another version. The plane itself is working perfectly fine, I'd just like to be able to install liveries and possible updates via OC, which is not possible right now. Any ideas? EDIT: Forgot to mention: Win 10 x64, Prepar3D v3.1 It was working a few days ago, so it must be something added by some recently installed stuff.

I've had this problem a few times, where basically one minute my clickspots will stop working everywhere, and then work the next. And no, my ezdok view is not the problem, there's nothing in my way. I am using standalone FSX:SE, windows 10 64-bit.