PMDG General Forum

Someone knows the seat config. for HV???Let me know,

Hiya,I have just reinstalled the 737TNG from backup due to HD crashing and the installer was backed up at version 1. I have the SU1.1 and I have installed this so now I have the 737TNG updated to 1.1. However the only update on PMDG's site is from 1.2 to 1.3 thus I'm a bit stuck. I tried installing the 1.2 to 1.3 over 1.1 anyway but it did not work so it seems I am unable to update from v1.1 to v1.3 any ideas folks?cheersrich

Hello All:I just finished a flight from KORF - KBOS on the 737-800. When I was cleared for approach to RNWY 22L at KBOS; I went to select the appropriate approach in the FMC via the DEP / ARR button. That's as far as I got; after I hit the DEP / ARR button I saw this line:ARR KBOS ---> (Button to click)So - as I usually do - I went to click the corresponding button; problem was - when I hit the button - nothing happened! Usually - I see a list of the STARS, RNWYS and Approaches. However, this time I got nothing; I couldn't even move off the DEP / ARR page (I could go to other pages - just not any "deeper" into the approach section... Has anyone else experienced this is…

hi: I usually got a windows warning when I fly a PMDG 737-800, said: Microsoft Visual C++ Runtime Library Runtime error R6025 ---Pure virtual function call Then FS2004 crash. What's wrong with this? This problem result in I have never arrival a airport. Please help me, thanks. Darren

I am having a problem where when i load the PMDG737 and switch to the panel view i am getting a combination on day time panel and night time panel. Also, when i turn the batteries on and have the parking brake on the ground power available light is not coming on so i can't start the plane. any help on this would be appreciated. I have include a pic to explain what i mean. I have re-installed twice but makes no difference. I also have fsuipc installed...any settings in there that might be causing this? By the way, i am using the 737-800 2d only model (pacific blue with wingtips) but have all installed from 737-600 to 737-900.

I kind of tripped over this very nice movie that shows some admirable Multi-Crew Co-operation skills on the 737NG:http://www.atcbox.com/modules.php?name=Dow...p=getit&lid=485(42 megs - you may have to register!)Also check out the complete before startup checklist, engine starts, taxi out and take off from La Palma. I'm sure most of you will feel right at home:http://www.atcbox.com/modules.php?name=Dow...p=getit&lid=501Feel free to delete this thread if it's a bit out of place. Just couldn't resist :-)Regards,Sebastian

Hi,Had this problem a couple of days ago and thought I got rid of it after reinstalling the latest AIRAC but now the problem is back again and drives me nuts!!The problem is when I load the 2D panel, if I instead load the VC panel everything is fine. What happens is that the flight loads and after reaching 100% I can see the panel flash for a split second, then the screen becomes blank for about 10-15 seconds and then the error message pops up saying FS9 crached and when clicking on the 'Details' button the info refers to the PMDG_737NG_Main.gau module. Read in an old thread that this isn't a PMDG related problem but how can this be when the problem only occours when load…

Hi, I wanted to make a paint request for a Copa Airlines for the PMDG B737-800 with Winglets Model. Copa is the national airline of Panamaand it's livery is almost 90% identical to Continental's livery and the reason for this is that Continental owns about 49% of Copa's common stock and they also have an alliance. Copa is the only airline in Latin America whose entire fleet of Boeing 737-700 and -800 have winglets, no other airline in Latin America can claim this! It should be a fairly easy re-paint for anyone who has done the Continental Airlines B737-800 with Winglets. I'm enclosing links to airliners.net for anyone who would be interested in doing this re-paint. At pre…

Hello out there,I have just installed 737-PMDG and find it to be great - except for one issue.The only sound i get is in cockpit view. When I move to VC, Tower,Spot plane views -no sound at all. Even when the gear is retracted - nothing.I am wondering if anyone else has this problem -or is it my error.Any help would be greatly appreciated.Cheers

I found some problems on 600/700-if you descend with Vertical speed (for example 250 knot on speed box and 4000 feet/min selected on Vspeed box),priority is Vertical speed.it always trying to keep Vspeed.it just retard the throtles when it understands, it is reaching selected speed but it still keeps Vspeed untill speed reachs to Vmo/Mmo which ever is lower.at that point,it will automaticaly activate level change to reduce speed.There is nothing about it.-if you wait to long on ground TAT must show +99 on upper DU but there isnt-On CDU, at departure/arrival page activate cursor never appears.appeared cursor will take you to RTE page-Reaching time to flap 5 is to fast.it t…

hi I'm looking to do my first PMDG737 repaint - but there's a whole fuselage texture and then a texture file with the fuselage split up into sections - do I repaint the big texture and then cut and paste it in sections into the fuselage split up bit?I can't find any instructions as to which files actually need to be painted and placed where - help please!!!(I was au fait with painting in FS98 and 2000, I didn't bother with 2k2 now I want to repaint and it looks like I've missed a lot of changes!)cheersJezAMD Barton XP2800+Asus A7N8X-X512MB Corsair RAMGeforce 3 Ti200

Hi,Has anyone seen any Hawaiian Airlines or Alohoa Airlines liveries for PMDG's beautiful Beech 1900D?If so, could you point me to it/them?Thank you,DonaldSNebraska USA

Hi!You might have heard of the copilot software of http://gates.to which is going into public beta soon. It will allow two people to fly the same aircraft over the internet, one as pilot and one as copilot.The developers write that there will be some necessary work for complex aircrafts to do, but it shouldn't be too hard. I can't judge, I don't know the 737's internals.Is there any plan to implement that? I am sure that this would increase the value of the PMDG a lot. I can hardly imagine any current addon which would deserve support for real copilots more and where it would make more sense because of the aircraft complexity.Though I would understand a negative answer be…

Posted this earlier in the wrong forum so here goes...Just bought and installed 737NG, version 1.3B. All ok but when loading FS2004 get warning message that it's not compatible with this version of FSUIPC. Currently it's 9.01.40901 and it needs 9.00.30612Any ideas where to get this version and where to put it when I find it! (no rude answers here please!)Thnx

Well my computer is getting kind of old, and I am now looking for a new system. Do you guys have any suggestions as what to get? My budget it pretty much anything under 1500....Thanks,Matt

Hi PMDG,I've downloaded and istalled the PMDG737-700-Winglets Air Berlin Dreamliner livery but the 2D Cockpit version 700 is all "grey".All other installed liveries are ok.Andreahttp://www.precisionmanuals.com/images/forum/800driver.jpghttp://fs2crew.com/linepilot.jpg

Hello PMDG-people.I started to build a real hardware FMC with a 5in monitor to use with PMDG737. Why is it that we can assign a key combination to the 15 page Buttons and not to the other keys? Is it possible to add that option to a later release or update?Or does any body has an other answer for my problem?I use an X-key input card and a videocard with TV out for the CDU. But I can't put the CDU's screen only not on the 5inch monitor because then I lose my input keys. :-(ThanksErik [email protected]

Hi all,First of all, here my basic hardware.Motherboard - Asus P4P800-XProccessor - Intel P4, 1.6GHzVGA card - Powercolor 9600XT Bravo, 128MBHard disk - Maxtor, 5200rpm, 40GBRAM - 768MB DDR400Win XP, service pack 1 and run with super tweak.I need advise, since i only have a limit of budget, which of my hardware you all think can a little bit increase my frame rate and really most important to upgrade?so far what i expect is to get 3.0 GHz proccessor. you think correct ?Regards,ShaheedanOil Town,Malaysia

Hi folks,when trying to start the PMDG 737 from cold and dark I follow the recommended cessna path - ie power off, key to off. load up a pmdg 737 and fuel cutoff the throttles.however, even with the battery 'on' the pax seatbelt and no smoking signs don't 'ping' when clicked and the fire test button doesn't make a noise either. the MFDs are blacked out and the engines take forever to 'turn over' with bleed air on.however, if I then re-load the aircarft everything is fine (but the fuel switches and pumps are all i n the 'on' position so I have to go round switching everything off).everything is fine from this point on but I'm getting pretty frustrated with having to load …

I know there was a topic on this before but I am still having a problem ever since I've upgraded FSUIPC 3.4 to 3.411/3.44. I have the registered version of FSUIPC 3.411 and ever since I've upgraded to FSUIPC 3.411 when I try to turn on the battery switches on the upper overhead none of my avionics turn on (main panel, FMC, etc.) This did not happen when I had the registered version of FSUIPC 3.4 installed. I am following the exact same procedures and everything. The only way I can think to fix this is to go back to FSUIPC 3.4 but I accidently overwrited that when I upgraded. Does anyone have any suggestions or do any of you guys still happen to have FSUIPC 3.400 and could…

Hi Folks,Im posting this here since I havent got any answers to this as yet on the other forums:I am considering adding that realism in my simming and planning on picking up Ultimate traffic. Can anyone please tell me if it will work with the following specifications on my machine:Pentium IV CPU 1.90GHz 512 MB of RAM Intel 82845G Graphics Controller - dont know much about computers more than that....so don't know what else exists on my PC!Bearing in mind I also use the following impeccable aircraft: PMDG's entire 737NG series, Flight1's ATR and Real Air's Spitfire.So will Ultimate Traffic blow my frame-rates?Is there anything I need to do to upgrade my machine? Also can a…

Hi I was thinking about getting a graphics card for Christmas.....the ATI radeon 9200. Can any0one who has it tell me how its runs with the PMDG 737s...thats the main reason I want to get it. ThanksTyler

Hi Guys and gurus. I have mapped CTRL F10 and CTRL F9 to extend/retract the stairs. The stairs come out but won't go back in!! (Looks very silly flying around!!). Anyone come across this and know the solution.ThanksTerry Tornado

I just downloaded the 1.1 update, and when trying to install it it asked for me to install v1.0 first. I tried moving the .exe file to my D: drive because that is where my FS9 folder is, but that didn't work. I then tried restarting my computer and installing the B1900D onto my C: drive so I could update that and then transfer it to the actual file used by FS, but it still told me to install v1.0.Help, please?(oh btw this is my first post, hi)Edit: I just reinstalled to my FS directory and then tried to update it but that still didn't work.

Hi,Can someone please help me.Over the years i gaint a lot of experience with DF737.I now bough the PMDG 736/7 and everything worked fine.But when i want to use a SID/STAR it does not show the availible runways and and SID/STARS on the "DEP/ARR page". I read some topics and i tried sev. sollutions like:The sid/star data from the pmdg webside, and put it in the sid/star folder. This gave me and errog in some lines. but didnt show the runways and sid/star's. And i tried the data from the Navdata webside, and this gave me the same problem. Everything is fine with PMDG, when i take of i set the sid mannually, but i cant land the plane bcause i do not have any arrivals in my F…