PMDG General Forum

Hi.Is there a list or a tutorial that gives the right Flight Level for a certain distance? (for the Boeing 737-600/700/800/900 NG)G.

Ciao to all,it happens that,somethimes, when I load the 737-700 on default with the engines on I don't get the numbers on the CRUISE/IAS-MACH/HDG/ALT/V SPEED gauges on the AP pannel....I do restart FS9 and try to change aircraft and then back to my 737-700..but still the numbers on the gauges of the AP are not there....The gauges do work ( I see it from the EFIS pannel)but can't see those numbers on the AP pannel...Please helppppppppppppppp...Thanz a lot...Ciaoooooooo

Hi PMDG,I just love your -8/900 series and having so match fun with it.I've watch the last weeks in the forum and I see that there is not to match support necesary anymore. I guess you gona fly your own product for a while now??? But because the B744 is my favorite aircraft I was wondering when you gona continu with my Queen? :( :) ;) :D Thanks,

With the new updates and with the new 737-800/900 installed. How do you now lower the airstairs?

Is it possible to have the FMC display a green on black for the color or is the white on black hard-coded in to the sim?ThanksKevin

Hi everyone!I have the following problem: When i adjust the max bank angle on the bank angle selector downwards, i can't put it up again. It just doesn't show the hand with the + in it, and pressing at the top of the selector also doesn't work!Anyone idea's?Cheers,Ian Udingahttp://www.precisionmanuals.com/images/forum/800driver.jpg

Hey i just wonder if someone could paint Sterling for the 737-800 it would be great i miss it! well thats about it lol:PTake care!Best regards:Alexander Blomlund

I noticed this happening number of time. When I reset the flight from a crash, the display of the cockpit disappears. I can toggle through screens and when it comes to the cockpit page, I can see the full view without the cockpit displaying. I have to end the flight and restart FS9 to get it back.Gihan

Thank you team.Fantastic jobDavid

I just got this confirmed by our 800 driver today so everyone listen up ;-) Selection of VNAV pior to flap retraction in TO mode will cause the speed bug to go straight to the airport restriction (i.e. 250 under 10000'). It will NOT keep the flap settings on the climb page whatsoever. And YES he did it on the real bird![h4]Best Wishes,Randy J. Smithhttp://www.precisionmanuals.com/images/forum/betaimg.jpgAMD 64 3200+ | ASUS KV8 DELUXE | GFORCE 5700 ULTRA @535/1000 | WD SATA 80 GIG | 512 DDR 400 |

Hello.A few days ago I purchased your 737-800/900, I also got a confirmation of my order, but I wasn't told if this has to be downloaded, or that it will be sent by mail in a boxed version. I didn't even get a confirmation to my mailbox. As I didn't hear anything for a few days, I desperately want to know what I have to do.THX for help.G.

Hello all.I wanted to post this question in the PMDG forum because this is the plane that I want to have good performance with. I currently have a P4 1.6 with 128mb of video ram (Nvidia Geforce 4), 512mb RAM. I am getting about 7 to 12 fps depending on weather. Quite choppy. Firstly let me say that I expect this kind of performance from such a complicated plane... I accept that. What are you folks getting for fps with lets say 1024x960 screen resolution. I would like to achieve AT LEAST a steady 20 fps with default scenerey and cloud settings on LANDING. My performance at FL350 is fine. I have tried tweaks like "clean start" listed in this forum but the reality is…

It has been referenced by rsrandazzo in a couple posts, and now it's on the AVSIM homepage.But where can i find it?It doesn't seem to be on the precisionmanuals site.

Hello PMDG,This is my first post. First, you guys got me flyin' the 737 again. Thanks for your hard work and efforts which are clearly visible here. Planes are MORE THAN awesome...even with those little annoyances:-) IMHO.I apologize if this has been mentioned...don't always have time to read all the threads:-(In the 600-700 only, in the vc variation, I cannot see anything showing in the lower eicas. With the 800/900, I can see the eng or sys data. Of course, the eicas style setting is "over/under" and the checkbox to show this info is checked.Just an FYI, not a show stopper. I don't always use the vc(until I can get faster memory/video card.)Didn't know if anyone e…

Hi everyone,After reinstalling my flightsim and the 600/700 I was fine, and looking forward to a good flight over to Birmingham.However, I then installed my 800/900 (Which I had not actually yet installed even before the FS cleanout) and booted it up to see what a great job PMDG had done. I booted it up and when the flight started loading it came up with the 'has encountered a problem and needs to close' message. I tried again and again, but to no avail! What could it be? Please help me!Thanks very much.Regards,Tom

On the livery download page can you add photos of the finished paints so we can see what the planes look like before we download and add it to FS9. Alot of the paints don't have a photo of what the livery look like.Joseph Feleppa

:-lolAutogen Engineers built a tower right on final path to RNWY 10 at SBAR. Go figure! :-lolOps, by the way, I was doing a full visual, no AP landing, and despite the fact that speed brakes were armed and throtles in idle at 50ft, autospeedbrake did not deploy, resulting in a double touchdown.....:-hmmm .. :-hmmm http://forums.avsim.net/user_files/74633.jpghttp://forums.avsim.net/user_files/74634.jpg

Hi guys,For all the newbies out there - thinking which graphics card to opt for - Then you have some to the right thread.This thread deal with graphic cards,their specifications and their capabilities and of course the best deal.The Hi-End graphic cards from nVidia are : GeForce 6800 - New ReleaseGeForce FX 5950 UltraGeForce FX 5900 UltraGeForce FX 5900GeForce FX 5900 XTGeForce PCX 5950with the following specs : 5950 ultra Graphics Core: 256-bitMemory Interface: 256-bitMemory Bandwidth: 30.4GB/secFill Rate: 3.8 billion texels/sec.Vertices/sec. 356 millionMemory Data Rate: 950MHzPixels per Clock (peak): 8Textures per Pixel: 16*RA…

Hi everybody!Two questions concerning the new B737-800/900 add-on1. Is the FMC-message sound really the same as in real life?? I thought this "ding-dong" is the flight-attendants call and the FMC-message sound would be a single chime only (like on the 777 or 744)!2. I expect to get the "END OF ROUTE" message at the end of my route, but it also comes up when I've landed (and there are still some wpts on my legs page for the missed-appr-procedure).From PS1.3 (I know, it's B744) I know that I'll get the message a) when there is no wpt to progress to (HDG-hold will be activated instead of LNAV).Is this really correctly modelled?Thanks for any replies,Stefan Bergert

Hi,Thx PMDG fore a realy good product.I got a question regarding the TERR button.Is this button simulatet?I have checked the manual and understand - the way i read it - that it should be simulatet.Is that a misunderstanding.King regardsSvend

Hello again ;)This time it

Hi AllIts a sad story. After installing the Aero Commander into FS9 my PMDG 1900 no longer works eeek. It operates for a few seconds then takes FS9 down with an ignomanious crash to desktop. Just before FS9 bites the dust I notice that the RealityXP gauges have failed also. What a mess. Still, it provides an opportunity to reinstall FS9 onto a different drive and really clean things up. So it isn't all bad news.Which leave the question of reinstalling the PMDG kit (ie.1900 and 737-6/7/8/900). Does anyone know of a procedure to reinstalling the PMDG software that preserves the registration files? Can I just copy the PMDG Simulation directory to the target drive or is it mo…

Hi allAfter upgrading to the 800/900 it

does the TCAS work in the FS2002 600/700 version [1.3]???i am familiar with the 737NG systems & panel having studied it for my CPL, but i can't get it to work.just like to add this is a superb airliner addon & quite possibly the best iver ever flown in FS (& i've got them all ). great job PMDG! can't wait to get my nice new SATA 180GB drive for FS2004 to use the 800/900!thankslaurie gregoire

The livery collection is getting quite large. Is it possible to make the "date added" field searchable? When I enter 5/4/2004 into the search area, for example, I get no hits. I think this would make it easier to find what's new rather than having to hunt through each page. Alternatively, give the user a choice to sort by airline, date, etc.Thanks.