The VOXATC Support Forum

I`m getting a "Server not found" when using the VoxATC Registration tool.

Hi,I have a problem concerning ground handling.Say I have one runway, 25. North of this RWY are 2 parallel TWY, November and Sierra. Problem is that both, arrival and departing traffic are instructed via Sierra. When taxiing with eg a C172 I can somehow manage to avoid the bigirons on crashcourse. But when driving a bigiron myself I get stuck.Blockings involving AI-only traffic can also be observed after a while sometimes. But as it seems at a first glance, only on certainAP-Layouts. Have to investigate further, though.Is the groundhandling a general problem with VoxATC or is there a workaround available ? In the example above, I ignore the taxi instruction and proceed vi…

Hi all, I've installed VFR scotflight FSX by Visualflight, (http://visualflight.info/products/scotflight-for-fsx-vol-1/overview/).Afetr running VOXATC INDEXER, I've started a VFR flight from Strathallan (XSTR), Scotland, for Islay (EGPI) or Glenforsa (ULL), but VOXATC UK X says that it did not find any runways for landing at Islay or Glenforsa ecc...Why the INDEXER does not indexes these airports?

i have setup my mike in my control pannel and all is fine! but when i switch to vox traning to start the program it will not work?? ihave a dell XSP720 with a sigmal tel high definition audio, xp.

I received an email from Derek asking these questions... this is much better suited to a support forum so others with similar problems might read and post:1. When in FS9 and click on the drop down VoxATC at the top, if I select Options it causes FS9 to reduce to the Toolbar and freeze in otherwords cannot open or return to FS9 by cliking on the FS9 toolbar icon? I need to restart the computer to get out of FS9.2. If I go to Start All ProgramsVoxATC the ATC Aircraft Type Name Editor .exe (prior to opening FS9 and VoxATC) does not open but produces one of those messages "has encountered a problem and needs to close".Error SignatureEvent Type clr20r3 P1 atcaircaftnameeditor.…

People, I ve just installed my go flight MCP PRO and bought the PMDG interface made for it. However, as soon as i registered and installed the key as asked by PMDG interface, the Vox Atc program stopped working. So i removed the dll for the pmdg interface (go_flight_PDMG or something like this) from the modules folder in FS and Vox ATC starts to work again. Please PMDG help because i ve spent a resonable amount for the interface and now i can not use it with on of my other favorite addon. Thanks, Rodrigo Samico Carneiro. Brazil.

What is the best outside view to use for taxi to assigned runway since there is no "progressive taxi" in Voxatc.

Hi Everyone,I am thinking in buying VOX ATC but I have a few doubts before paying that amount of money. I use FS Commander for flight planning. Is there any problem in using this flight planner to create PLN files for later use in VOX ATC??I fly both in Eurpoe and USA so which version should I buy. If I buy the UK version (European JAR) can it also be used in the USA or do I have to buy normal version. Can both versi

When flying at night, all VoxATC traffic is transparent, almost invisible. Is there a setting in the video card setup that will solve this? I have an EVGA 8800 GTX.Thanks

Hey everyone.I have a headset with microphone. I can hear myself (in the headset) while I am speaking (into the mic), but NOT while I'm transmitting to ATC. When talking to ATC, the headphones turn off. Actually, I think it's when the transmit switch is activated. I suppose this is to reduce feedback if someone only has a microphone.It works like this with the microsoft trainer software as well. In that case, there is no transmit button; the headset never works during the speaking part of training. However, I though the very first time I used the trainer, it did not do that, and I could hear myself in the headset. Is that right? Is that the way it's designed to work?…

Hello,I have a small home cockpit with a radio pedestal with operating Com 1 & Com 2 radios. For some reason, VOX ATC only responds to radio changes in my COM 1 radio. Is this Normal or are others out there using 2 radios to handle to work load?Polmer

I have a fairly high spec PC with Intel Duo2 core 6600 2.4Ghz, 2Gb ram, Nvidia Ge-force 88oo gtx 768mb graghics using Windows Vista Home premium 32bit. The only two additions so far are Horizons Gen X photo scenery and Track IR. Since the SP1 update, FSX has run very smoothly at 30 fps. My new addon is VoxATC UK DVD version that includes the new voices.When VoxATC UK enabled, normal flying is still very smooth at 30fps, but when I communicate with VoxATC, their voice replies and text changes in the Prompt window causes bad sim stopping stutters. Any ideas or similar problems out there please from other Vista users ?? Peter

I'm probably doing something wrong (again). I created a straightforward high altitude IFR flight from KDEN to KSLC - no changes to the plan: All went fine, until the the last leg. I asked Center for the descent to approach, got it - and that was the last I heard from anyone. The Citation merely went across the centre of SLC and then began an overhead orbit. I abandoned it, killed VoxATC, called up MS ATC and then carried out a normal ILS landing. A similar thing happened tonight - DEN - KASE Aspen. All went well, asked for the descent, was cleared to 10 (not good in those hilly things), but went over DBL at 14: she tuned inbound toward the JIDCO intersection, and I went …

Hi,I've downloaded the demo for FSX and played with it all day :) loving it too much not to whip out the CC and buy it.While playing with the demo I could not find a way to remove the panel from aircraft I have installed it onto, how does one do this?I do plan to remove the demo before installing the deluxe edition, but still would like to know how I can remove the panel from my aircraft.-EditI found it in panel.cfg fileCheers

As I said.... while using VoxATCX i have to repeat at least one word for program to move on to next procedure. I recently added new sound card... but i removed and reinstalled Vox and still have to repeat at least my call sign for it to work properly. Thanks in advance,Steve wonderful ATC by the way using default voices.

So Monday will come around so that I can actually register VoxATC on-line. . . grrrr... I've purchased the AT&T voices - beautiful! It REALLY enhances the experience!. My one remaining issue (Zane!) is - I have installed the Control Panel in all aircraft and followed with the re-indexing - but I only get the default N1151D in the in-screen translucent panel: ATC will answer back (if, say I call using G-BYEM) ONLY using the "N1151D" number. This is also reflected at the top left of the screen box. Would you have any idea as to what I haven't done, or what, perhaps, is the order I have to follow? Aside from this one remaining problem - it is just great to have such rea…

I went to the link (RCSimulations) from the Vox ATC site to try and buy the FSX version of VOX ATC (I already have the FS9 version), but the RCSimulations site is not very clear on which version does what, and there seem to be a lot of versions, for when I did a product search on VOX ATC on that site, it found eighteen results.For example there is an X UK DVD version at 79.95, which like a lot of the other ones, is listed twice, then an X Universal for FSX version (whatever that means) for 49.95, then a Universal version with 2 voices for the same price, then an X Universal version for 24.95, then a UK X version for 29.95. It surely can't just be me that finds this confus…

After I've been told to change freq ,I give my postion to unicommand told "not at this time " This happens every vfr flight when landing at non controlled airports.James

I created a VFR flight plan from HRR-Healy River, Alaska (airstrip) to PATK-Talkeetna, Alaska (Unicom). It all started well - Fairbanks opened up my flightplan and passed me off to Anchorage Center. Got a message to fly my flight plan.As I got within 20 miles of PATK, Anchorage Center passed me off to Anchorage Center. Here's where the problem started: I was then supposed to tell Center that I was at 3,500 (which I was) heading to 11,000! I think I should have been told to squawk 1200 and contact Talkeetna Unicom for an aiport advisory.Any ideas? My evaluation period is just about up.ThanksPaul Dahlen

I'm trying to use the sid star set up. The problem I'm having is with loading the flight file. Just about all my flights are .pln files and VOXATC only lets you choose .flt files. Am I missing something here, Because when I use a FSNav and make a flight and save it to FS9 it saves it as a .pln file. I guess what I'm asking, VOXATC only lets you use Sids and Stars if you have made your flight plan with the FS9 flight planner (.FLT)? Did I make sense? Bob

I recently purchased Mike and Crystal from AT&T and set them up in VoxATC-X. The problem is that when they talk they more often than not stutter and break up. I have no other sound anomalies with my system and they work fine "outside" VoxATC.Is it because my PC is starting to age?DaveSpecs...Athlon +3200 + 1.5Gb RamRadeon X800XT AGP-8X2 x 120Gb Sata WDSoundblaster XiFi GamerFSX SP1P.S. The standard MS "robot" voices work fine too.

After using the newest version of VoxATC and installing additional AT&T male and female voices I noticed both male voices sounded identical while the female voices were correct. I had selected the AT&T Mike voice as " the computers default voice" in the Control Panel / Speech / Text to Speech setup. In the vox voice setup I selected AT&T Mike as the male controller and AT&T Rich as the pilot. When you click on the speak button the voice identifies itself correctly but both voices are Mike. The female voices are correct. Even stranger I selected the default voice as MS Mary and returned to the Vox voice setup. You guessed it, now both male voices identify t…

Flying my Carenado Cessna 206 on the Kansas vfr flight and all is going well until handoff to center where they request me to squawk 3026 and Ident. I punched in the numbers and hit the I key as stated in the directions for FSX and nothing happens except a pissy controller continuing to repeat her command.Any ideas? That was not a fun first flight!Paul Dahlen

I have been using VoxAtc X for 3 weeks now. It is very entertaining and immersive. I just recently purchased the AT&T voice pack with Mike and Crystal and installed them. They work perfectly with VoxAtc, but those are the only two voices that I can select for use. I would like to use Microsoft Mary and Mike for the male and female pilot voices and AT&T Mike and Crystal for the male and female controller voices. Can this be done? If so, how? Thanks in advance. By the way, I am using the latest version of VoxAtc X.Steve

Hi All,I'm completely new to ATC phraseology and protocol, and I've recently purchased VOXATC, and I'm really enjoying it. I've also purchased Comm1 VFR Radio Simulator so I can better understand what's being said in VOXATC and why.There two simple things I'm having a tough time figuring out however, and I'd really appreciate some help.1) Utopia Radio - Before taxiing, VOXATC prompts me to contact Utopia Radio to request that they open my flight plan. Why is it called Utopia Radio? As I understand it, what I'm actually doing is contacting my area's Flight Service Station. I believe in the area where I'm flying (southern Ontario), the FSS is based in London, Ont. Is "Utopi…