The VOXATC Support Forum Latest Topics

Lost serial

Sun, 05 Apr 2026 17:11:31 +0000

After Pc crash lost all data bought from Carol at RC Simulations

is it possible to retrieve the registration key

really missing Voxatc

Thanks

Sent email to VoxAtc no reply as yet

Unable to buy voxatc

Sat, 28 Jun 2025 12:52:06 +0000

Hi, fellow simmers,

I went to the website of voxatc, it seems that https://www.rcsimulations.co.uk/

is not reachable. That page is requested when clicking [Register}. Also the contact page does not work either, so how am I supposed to buy the registration code?

Thank you for your time,

Marc

Volume keeps dropping to 50% (Do nothing is set)

Sat, 27 Jul 2024 20:04:52 +0000

Hello all,

In my communications settings, I have "Do Nothing" set, but Voxatc still drops to 50% volume everytime it talks. How do I keep this at 100%?

I run P3Dv5.4

Thanks,

voxatc volume problem

Sun, 08 Oct 2017 14:15:38 +0000

The voices of voxatc (voxpop) are very quiet and difficult to hear (p3d V4). In the windows volume mixer I see that the volume always jumps back to about half of all other sound volumes. Why is this? If used on headphones it could be to protect from setting too loud, but on the same speakers as the sim, it makes it very hard to hear even with the volumes to max in the voxatc voice configuration.

Most of the time the clicking sound when pressing the ptt button does not play or cannot be heard.

And one other question, when assigning buttons or keys how do you remove button settings to nothing? The only way I found to remove a button or key press was by replacing it with another one.

Thank you.

VoxAtc 7.43 PTT Delay

Thu, 29 Feb 2024 08:06:56 +0000

Ive seen some postings here about a delayed push to talk in VoxAtc. It does happen. I fly in a regular walk in, sit down simulator that mimmicks a Boeing 737-800. This may sound a little dated but I still run FSX cause I can undock all my instruments and spread them out where I want them. Anyway, back to Voxatc. I installed Voxatc, FS2Crew and a bunch of other stuff. I have installed in the main FS computer a sound blaster Recon Tactic 3D sound card and the headset that goes with it. Its about 10 years old. I tried updating the driver for it and they just dont update the card any longer, its too old. So I used the last driver they had to offer. As soon as I installed it, some of the voices that were missing from FS2Crew suddenly appeared but so did the DELAY IN VOXATC PTT. I removed the driver and just used the window driver an Vox got back to normal but I lost a certain part of FS2Crew. SO, if your having a problem with Voxatc and "push to talk" I can assure you its either your sound card or the driver. Old drivers not made for new operating systems systems tend to corrupt the Windows registry. Luckily, I had a restore point to go back to when all was working well. Graphics drivers have been known to play funny tricks with the registry too. If your components are old, even though they say that the driver is compatable with the newer operating systems and may very well be, the components are not, especially when run on their dedicated drivers. Here's what I did. Instead of buying a new soundcard, cause I dont know if the drivers will be any better than the one I cant use, I enabled the onboard sound and Im using that for all the sounds of FSX, FS2Crew and other programs I use. I left the Sound Blaster card in the PCIe slot and use it for VOXATC, with the "windows" driver, not sound blasters. Now Vox works flawlessly. No delayed PTT, no crashes, no miss communication etc. and the onboard sound with FS2Crew? I hear things now I never heard before. Boarding sounds, flight attendants, fuelers. It opened up a whole new world. Moral of the story? Watch what drivers you install into windows. They attach themselves to the registry and sometimes corrupt it. That makes an operating system very unstable. There are many drivers that were made for windows 7 that they say are compatable with windows 10, they might work but they're not "as" compatable as they should be. Better if they were made for windows 10. Just in case somebodies still suffering with the problem, like me. Hope yo find this helpfull.

VOXATC and Airports in China Problem

Fri, 02 Feb 2024 19:09:26 +0000

Hello everyone,

I need our knowledge please. I installed some new airports and also ran the VOX Indexer.

At Pudong Airport (ORBX) I get the error message "No clearance ATSU at: pudong. Disable VOXATC".

I also have this problem at another airport in China. The AFCAD's have all frequencies.

I can't understand the problem. Hopefully you can help me.

Thanks in advance.

Regards Dieter

Joystick and Keyboard Utility

Sat, 30 Dec 2023 22:15:53 +0000

Hi Folks,

Sorry if I'm asking a question that's been answred elsewhere, but I've searched and can't find an answer. Actually, pretty embarassing as I've used VoxAtc for several years and am just tuning my FSX back on a year after moving.

I've not yet found my Yoke in the still unpacked boxes (four bedroom house in to a two bedroom cottage) so I thought, as an interim, I'd use my X52 joystick and throttle which I have found.

Problem is, I can't find the 'Joystick and Keyboard utility' the help texts talks about and the Joystick assignment screen still wants to talk to the Yoke.

Could someone please tell me where, in the FSX Steam VoxAtc install the utility to assign the X52 as the Joystick to be used?

Many thanks for your help,

Kindest Regards,
Ron

Voxatc and P3D v6

Mon, 10 Jul 2023 13:40:56 +0000

Has anyone tested Voxatc with P3D v6? Does it work?

Regards Dieter

Any plans for an FS2020 version?

Wed, 26 Aug 2020 11:17:30 +0000

Well, someone had to ask...

Correct ATIS on Approach

Fri, 25 Aug 2023 12:39:21 +0000

Hello all,

there was always the topic here how to listen to the ATIS with VOXATC during the approach to determine the correct runway.

I have been able to solve this problem in my home cockpit, so I thought I would let you know how to get a technically correct result.

Here is the initial situation with me.
P3Dv5.4, Active Sky, VOXATC (latest Version), current Navigraph Charts

This is what I did:
I added today's ATIS frequencies to all AFCAD of my addon airports. If I now make a "temporaray frequencie change" on approach with VOXATC, I can turn in the ATIS frequency in the RMP and hear the ATIS as it is normally reproduced by the P3D. So also which runway is in use.

For me this works perfectly. I hope the description helps others of you also.

Regards Dieter

Questions About VoxATC

Wed, 30 Aug 2023 10:58:56 +0000

Hello,

I've been interested in VoxATC for a while now, and I’ve gathered the following questions I hope someone can answer:

1) On the website it states there are a number of TTS voices included in the Deluxe DVD offer – can someone confirm?

2) I read a gauge need to be installed in every aircraft. Is this for functionality or convenience – can VoxATC run without it?

3) Can the sound devices for sound in- and output be selected?

4) I see it reads BGL files for traffic injection, and AIGFP files are in the works?

5) Is there an official support forum?

I realize there is a demo version of the product, but I’d like to clarify as much as possible before installing it – thanks!

VOXATC and Frequencys with .005

Sun, 23 Jul 2023 12:13:27 +0000

Hi all,

I have a problem in VOXATC that I can't solve. Based on the Navigraph charts, I have started to revise the frequencies of my Addon Airports.

Now, according to Navigraph for EDDL Ground, 121,600 now becomes 121,605.
That's how I set it in Afcad. However, VOXATC obviously does not accept the frequency.

If I judge the problem correctly it is due to the .605 all other modified frequencies are working.

Does one of you have an idea about this? Is this a bug in VOXATC?

Something is odd though. I have a hardware cockpit from Skalarki, if I turn on the frequency 121.605 on the RMP, it doesn't work. But if I use the ATC window from P3D and select the ground frequency there with 121.605, VOXATC also changes.

Vox no longer working after cloning system to new computer

Sat, 19 Aug 2023 19:56:56 +0000

I built a brand-new powerful flight-symming system during the last few weeks. Since I have a complicated networked system with 8 computers I preferred cloning my system to the new computer instead of starting afresh, well konowing that this could cause massive problems. I can state that the transition was successful, all programs are working, all my add-ons running on different computers can access the sim and receive data with one sad exception - VoxATC. The panel window shows initializing, I hear the test voices in my headphone and even the traffic is correctly injectedi into P3Dv5. However, the VOX panel seems to freeze at initializing and never shows me the ATIS frequency to tune. I usually display the VOX panels on a networked computer using the Vox Proxy. The proxy does not recognise the panels open on the the networked computer anymore, although the sim communicates with all other add-ons on the same client without any problems. But even when the Vox Panels are run on the sim-computer itself, the problem persists. The error log didn't show anything special. However, I noticed two oddities that could be relevant:

1. Since I use VOX merely in PMDG planes, and I had to reactivate these planes after the transition because of new hardware, could it be that VOX has problems with this, perhaps the panel.cfg got messed up?

2.If I use the net view command in the Windows 10 command window I get an error. However, all clients can be pinged in both direction and file and printer sharing works flawlessly. Can anybody help me out here since I'm reluctant to reinstall Vox because of the many problems that can arise (and also have arisen in the past 20 years I've been unsing the program).

Thanks draci

"Unable at this time" when requesting FLXX0

Wed, 19 Jul 2023 17:50:02 +0000

Hello all!

Whenever I request a specific cruising altitude from VATC, I always get the response "unable at this time". If I choose "request higher", they'll give me an altitude I can't reach yet (Like FL410 from FL350). Is there anyway to get the kind robot people to bless me with my humble request?

Thanks,

How to get VOXATC to use AIG-AIM

Mon, 26 Jun 2023 07:18:04 +0000

Hello all!

I use P3Dv5 HF3. I was wondering how to get VOXATC to use AIG-AIM models? I'm not sure what the cause of problem might be, but VOXATC isn't spawning any AI at all, despite the slider being 100% in VOXACT Settings. AIG-AIM is running using the traffic manager, so the two are essentially running at the same time without influencing each other. Is there any way I can flip a switch and get VOXATC to start using these models? The indexer seems to scan through them, so I don't see what the problem is.

Any help is greatly appreciated!

VOXATC and P3D V5.4

Sat, 10 Jun 2023 09:52:18 +0000

Hello everyone,
I have a problem with VOXATC since the update to P3D V5.4.
The program works as such, since the texts are displayed correctly in the VOXATC window. However, the voice output sometimes fails completely, or the announcements are only stuttered in flight.
Has anyone already run VOXATC with V5.4?

Regards Dieter

No AI Traffic

Fri, 10 Feb 2023 06:26:19 +0000

I had a sound card problem that corrupted Voxatc so I uninstalled it and reinstalled 7.43. It works fine but I have no AI traffic. Ive adjusted all the sliders in Voxatc and in FSX. Vox initializes fine but without poppulating the AI traffic. Any help would be greatly appreciated

Thanks

Vavated Runway

Sun, 18 Dec 2022 09:57:31 +0000

Hi there,

VoxAtc can´t understand the phrase "vacated runway". Answer is always followed by "pass your message" by the contoller.

Knows anyone a solution?

Regards

Volker

VOXATC (2022) - how long does it take to get Serial no.?

Thu, 15 Dec 2022 11:46:10 +0000

Hello,

Two weeks ago, I installed VOXATC demo for my FSX:SE, and managed to run it after some initial problems.

Then, after the demo version expired, I decided to purchase the full version via rcsimulations.co.uk (5 days ago). However, until now I did not get any Serial no. / Registration key, I have no response from the seller, I contacted them also via their Facebook page (message seen, but no response), via email to carol@rcsimulations.co.uk and info@rcsimulations.co.uk, but still nothing. The only thing I have from the seller is an order receipt confirmation email (contains just the number of the order, customer number, and order date...) and the email "Your files for download", which contains the link leading to nowhere ("Server error - The resource cannot be found").

Guys, what is your experience? How long did you wait for your Serial no. / Registration keys? I am a little bit afraid that if I do not get it now, I will surely not get it during the Christmas period, so MAYBE, what I paid for, I will be able to use from mid January, if at all. I really do not know who else to contact.

Thanks in advance for your comments and tips.

Simon

registration code

Fri, 22 Nov 2019 00:42:31 +0000

Hello.

How long does it take to get a registration code? Two weeks ago I paid for an upgrade from Version 6 to 7 and in the meantime I sent three mails. No answer and no registraion code yet. Bad customer service is one thing, not to deliver what customers paid for is another thing.

Using Parking Codes and Fatal Error

Tue, 13 Dec 2022 17:11:17 +0000

Suddenly having a strange issue on every flight. Never had a problem with VoxAtc before. I get a fatal error on every flight, VOX somehow thinks that my assigned gate (in the error log below Gate 105 at ZGGG) is already occupied and responds with a fatal error. I'm using parking codes to reserve a gate at the destination. Worked perfectly so far. Below is the relevant section of the error log with the error in bold..Does anybody have an idea what could cause this? The only change I've made recently is reduce the AI number of flights in the user bubble, since I use PXseecon to generate enroute flights, I set these to 0 in the VA-settings, but I don't think that this causes the parking issue. Any help appreciated. Draci

16:21:40.9049429 Current Position = 23.3551620390128 113.29978166329 482.458041636172
VADI key pressed event : 42
RSC Key pressed
16:22:06.2782490 Current Position = 23.3713794048867 113.304176479881 163.857015240527
VADI key released event : 21
VADI key released event : 42
Instructor State set to ISRollOut
36491031 Ins Text set : Taxi clear of runway
36491031 Prompt disabled
36491031 Prompt Text set :
ATSO exception gate one zero five already assigned parking    at com.intworkings.voxatc.ParkManager.AssignComponent(Aircraft acIn, AerodromeComponent acpIn)
   at com.intworkings.voxatc.Aerodrome.GetGateOrPark(Aircraft acIn, AircraftType atIn, Boolean alwaysReturnAC)
   at com.intworkings.voxatc.ASSLanding.SendClearInstructions()
   at com.intworkings.voxatc.ASSLanding.Moved(Position posIn)
   at com.intworkings.voxatc.ATSO.CheckMovements()
   at com.intworkings.voxatc.ATSO.Run()
   at com.intworkings.voxatc.TerminalATSO.Run()
   at com.intworkings.voxatc.ATSOWorker.ActiveRun()
36511844 Ins Text set : FATAL ERROR! disable VoxATC
16:22:41.3881182 Current Position = 23.3875611343878 113.308548541465 62.7058577646905
VADI key pressed event : 42
RSC Key pressed
VADI key released event : 42
VADI key pressed event : 52
RSC Key pressed
VADI key released event : 52
VADI key pressed event : 42
RSC Key pressed
VADI key released event : 42
VADI key pressed event : 42
RSC Key pressed
VADI key released event : 42
AI Aircraft Count = 40

VOXATC Indexer issue

Sun, 20 Feb 2022 23:45:14 +0000

I've seen this happening to others since 2013 but this is actually a fresh installation

Win 11- P3D v5.3 - PMDG NGu - non addon sceneries as yet but when I attempt to run the indexer it hangs after seconds.

Any help would be very appreciated

Thanks

Regards, Maz

FSX SP2 REQUIRED

Sun, 11 Sep 2022 18:50:04 +0000

Im having the same problem ! Any suggestions to solve the problem ?

Wont read bgl files ( WOAI) FSX SE

Sun, 17 Jul 2022 07:36:15 +0000

default fsx planes work fine and all other scenery BGL works fine just not WOAI bgls

Any one have any ideas why?

eg Traffic_000_WoA_Avianca Brasil_Wi13.bgl

Active Forum

Sun, 12 Jun 2022 16:50:48 +0000

Is this still an active forum? Or has it moved?

no activity for sometime now