The VOXATC Support Forum

After Pc crash lost all data bought from Carol at RC Simulations is it possible to retrieve the registration key really missing Voxatc Thanks Sent email to VoxAtc no reply as yet

Hi, fellow simmers, I went to the website of voxatc, it seems that https://www.rcsimulations.co.uk/ is not reachable. That page is requested when clicking [Register}. Also the contact page does not work either, so how am I supposed to buy the registration code? Thank you for your time, Marc

Hello all, In my communications settings, I have "Do Nothing" set, but Voxatc still drops to 50% volume everytime it talks. How do I keep this at 100%? I run P3Dv5.4 Thanks,

The voices of voxatc (voxpop) are very quiet and difficult to hear (p3d V4). In the windows volume mixer I see that the volume always jumps back to about half of all other sound volumes. Why is this? If used on headphones it could be to protect from setting too loud, but on the same speakers as the sim, it makes it very hard to hear even with the volumes to max in the voxatc voice configuration. Most of the time the clicking sound when pressing the ptt button does not play or cannot be heard. And one other question, when assigning buttons or keys how do you remove button settings to nothing? The only way I found to remove a button or key press was by replacing …

Ive seen some postings here about a delayed push to talk in VoxAtc. It does happen. I fly in a regular walk in, sit down simulator that mimmicks a Boeing 737-800. This may sound a little dated but I still run FSX cause I can undock all my instruments and spread them out where I want them. Anyway, back to Voxatc. I installed Voxatc, FS2Crew and a bunch of other stuff. I have installed in the main FS computer a sound blaster Recon Tactic 3D sound card and the headset that goes with it. Its about 10 years old. I tried updating the driver for it and they just dont update the card any longer, its too old. So I used the last driver they had to offer. As soon as I installed it, …

Hello everyone, I need our knowledge please. I installed some new airports and also ran the VOX Indexer. At Pudong Airport (ORBX) I get the error message "No clearance ATSU at: pudong. Disable VOXATC". I also have this problem at another airport in China. The AFCAD's have all frequencies. I can't understand the problem. Hopefully you can help me. Thanks in advance. Regards Dieter

Hi Folks, Sorry if I'm asking a question that's been answred elsewhere, but I've searched and can't find an answer. Actually, pretty embarassing as I've used VoxAtc for several years and am just tuning my FSX back on a year after moving. I've not yet found my Yoke in the still unpacked boxes (four bedroom house in to a two bedroom cottage) so I thought, as an interim, I'd use my X52 joystick and throttle which I have found. Problem is, I can't find the 'Joystick and Keyboard utility' the help texts talks about and the Joystick assignment screen still wants to talk to the Yoke. Could someone please tell me where, in the FSX Steam VoxAtc install the uti…

Has anyone tested Voxatc with P3D v6? Does it work? Regards Dieter

Well, someone had to ask...

Hello all, there was always the topic here how to listen to the ATIS with VOXATC during the approach to determine the correct runway. I have been able to solve this problem in my home cockpit, so I thought I would let you know how to get a technically correct result. Here is the initial situation with me. P3Dv5.4, Active Sky, VOXATC (latest Version), current Navigraph Charts This is what I did: I added today's ATIS frequencies to all AFCAD of my addon airports. If I now make a "temporaray frequencie change" on approach with VOXATC, I can turn in the ATIS frequency in the RMP and hear the ATIS as it is normally reproduced by the P3D. So also which …

Hello, I've been interested in VoxATC for a while now, and I’ve gathered the following questions I hope someone can answer: 1) On the website it states there are a number of TTS voices included in the Deluxe DVD offer – can someone confirm? 2) I read a gauge need to be installed in every aircraft. Is this for functionality or convenience – can VoxATC run without it? 3) Can the sound devices for sound in- and output be selected? 4) I see it reads BGL files for traffic injection, and AIGFP files are in the works? 5) Is there an official support forum? I realize there is a demo version of the product, but I’d like to clarify a…

Hi all, I have a problem in VOXATC that I can't solve. Based on the Navigraph charts, I have started to revise the frequencies of my Addon Airports. Now, according to Navigraph for EDDL Ground, 121,600 now becomes 121,605. That's how I set it in Afcad. However, VOXATC obviously does not accept the frequency. If I judge the problem correctly it is due to the .605 all other modified frequencies are working. Does one of you have an idea about this? Is this a bug in VOXATC? Something is odd though. I have a hardware cockpit from Skalarki, if I turn on the frequency 121.605 on the RMP, it doesn't work. But if I use the ATC window from P3D and select …

I built a brand-new powerful flight-symming system during the last few weeks. Since I have a complicated networked system with 8 computers I preferred cloning my system to the new computer instead of starting afresh, well konowing that this could cause massive problems. I can state that the transition was successful, all programs are working, all my add-ons running on different computers can access the sim and receive data with one sad exception - VoxATC. The panel window shows initializing, I hear the test voices in my headphone and even the traffic is correctly injectedi into P3Dv5. However, the VOX panel seems to freeze at initializing and never shows me the ATIS frequ…

Hello all! Whenever I request a specific cruising altitude from VATC, I always get the response "unable at this time". If I choose "request higher", they'll give me an altitude I can't reach yet (Like FL410 from FL350). Is there anyway to get the kind robot people to bless me with my humble request? Thanks,

Hello all! I use P3Dv5 HF3. I was wondering how to get VOXATC to use AIG-AIM models? I'm not sure what the cause of problem might be, but VOXATC isn't spawning any AI at all, despite the slider being 100% in VOXACT Settings. AIG-AIM is running using the traffic manager, so the two are essentially running at the same time without influencing each other. Is there any way I can flip a switch and get VOXATC to start using these models? The indexer seems to scan through them, so I don't see what the problem is. Any help is greatly appreciated!

Hello everyone, I have a problem with VOXATC since the update to P3D V5.4. The program works as such, since the texts are displayed correctly in the VOXATC window. However, the voice output sometimes fails completely, or the announcements are only stuttered in flight. Has anyone already run VOXATC with V5.4? Regards Dieter

I had a sound card problem that corrupted Voxatc so I uninstalled it and reinstalled 7.43. It works fine but I have no AI traffic. Ive adjusted all the sliders in Voxatc and in FSX. Vox initializes fine but without poppulating the AI traffic. Any help would be greatly appreciated Thanks

Hi there, VoxAtc can´t understand the phrase "vacated runway". Answer is always followed by "pass your message" by the contoller. Knows anyone a solution? Regards Volker

Hello, Two weeks ago, I installed VOXATC demo for my FSX:SE, and managed to run it after some initial problems. Then, after the demo version expired, I decided to purchase the full version via rcsimulations.co.uk (5 days ago). However, until now I did not get any Serial no. / Registration key, I have no response from the seller, I contacted them also via their Facebook page (message seen, but no response), via email to [email protected] and [email protected], but still nothing. The only thing I have from the seller is an order receipt confirmation email (contains just the number of the order, customer number, and order date...) and the email "Your…

Hello. How long does it take to get a registration code? Two weeks ago I paid for an upgrade from Version 6 to 7 and in the meantime I sent three mails. No answer and no registraion code yet. Bad customer service is one thing, not to deliver what customers paid for is another thing.

Suddenly having a strange issue on every flight. Never had a problem with VoxAtc before. I get a fatal error on every flight, VOX somehow thinks that my assigned gate (in the error log below Gate 105 at ZGGG) is already occupied and responds with a fatal error. I'm using parking codes to reserve a gate at the destination. Worked perfectly so far. Below is the relevant section of the error log with the error in bold..Does anybody have an idea what could cause this? The only change I've made recently is reduce the AI number of flights in the user bubble, since I use PXseecon to generate enroute flights, I set these to 0 in the VA-settings, but I don't think that this cause…

I've seen this happening to others since 2013 but this is actually a fresh installation Win 11- P3D v5.3 - PMDG NGu - non addon sceneries as yet but when I attempt to run the indexer it hangs after seconds. Any help would be very appreciated Thanks Regards, Maz

Im having the same problem ! Any suggestions to solve the problem ?

default fsx planes work fine and all other scenery BGL works fine just not WOAI bgls Any one have any ideas why? eg Traffic_000_WoA_Avianca Brasil_Wi13.bgl

Is this still an active forum? Or has it moved? no activity for sometime now