The VOXATC Support Forum

I have used VoxATC and AIG AIM together for a long time, without seeing any problems. I am very happy with both programs. I have now upgraded to P3d v5.3HF1, and on my last flights I have seen double aircrafts parked at the gates. The AI traffic in P3d is turned off. If I turn off AIG TC then there is no double parking any more, but much of the other AI traffic also disappear. I have the AI traffic on 50% both in VoxATC and AIGAIM. Is it a way I can avoid double parking without redusing the AI traffic? My last two flights has been from LHBP to LWSK. Both airports are addon airports. The Atc is very good from take off to I cross the border between Serbia/Kosovo and Nort…

Hi all, have been trying to get VoxATC working in Windows 11. However, cannot pass the 'cannot initialize voice recognition'. FS2Crew Speech recognition works fine. Before I spend many hours in trying to fix this: has anyone actually a confirmed working Windows 11 VoxAtc combination? Thanks!

I experience that, after landing, Ground directs my always to the same parking place at each airport, which is often a remote place at a ramp, which is not always suitable for my B738. Is there a possibility to program a certain parking place or ask Ground for a certain parking place? Hans Hartvelt The Netherlands

The last communication with Ground after landing and taxiing in is "KLM 174 shutting down". I hear captains of AI aircraft saying this to Ground, so it must be a part of the VoxATC phraseology. Nevertheless, when I say "KLM 174 shutting down" Ground reacts by saying "last aircraft say again". I also cannot find this message in the VoxATC reference guide. My question: Why does VoxATC not recognize this message?

Thanks to folks here, I have been successful in modifying afcads to update my home airports (KUAO) current frequencies and control tower. Everything works great except after taking off I get directed to contact a fictitious Oceanic center rather than Seattle center as I should. When I use my modified afcad, I am instructed to tune to oceanic center really close the the airport. When I use the stock afcad, I get told to tune to Seattle center about five miles away from KUAO. So, I’m thinking I need to define an additional frequency (I tried center but no joy) or a radius around the airport. Can someone point me in the right direction? here is my modified afca…

On my two last flights with VoxATC creating the AITraffic, I have been taxing after AIAircrafts to Rwy holding position. When waiting at Rwy hold, the aircrafts in front of me is given takeoff clearence, they start taxing for take off, and then they just disappear . The same with landing aircrafts. I see the aircraft on final, but they never land, they just disappear. Can anyone explain why this happens? All aircrafts are Dash 8 from the same airline. Tor Arild Danielsen

I can't get VoxAtc to respect my parking codes and assign a certain preset gate specific for my airline in P3Dv5 .This hasn't been a problem in earlier versions of VoxATC and FSX. For my test I used the PMDG 747-8i variant. I set atc_airline=ABC in the panel.cfg file of the 747 and all its engine models, also for the freight versions and of course for the 8i. Then I used ADE to edit the parking code of Flightbeam KDEN and assigned ABC to Gate A45 while removing all other parking code assignments and recompiling the AFCAD file. Next I run the VOX indexer. So with this setting I expected VOX to assign me Gate A45 after landing and keeping this gate empty for me which unfort…

I have MK studios EKVG Vagar addon airport. I have had two flights at Vagar lately, one as a destination airport, and one as departing airport. Both times VoxATC have not got contact with ATC at the airport. I know it is an AFIS airport with a tower frequence 124,85. When I was landing my "first officer" called for "Vagar information", but no answer. When I departed, Vox ATC did not enable and said it was no suitable Com at the airport. Is it a way for me to fix this? Tor Arild Danielsen

I flew an IFR flightplan yesterday. On clearance I was assigned a SID route. At climb the departure controller handed me over to oceanic center. Today, I checked everything in VOXATC. The SIDs and STARs are recognized in ProcedurePronunciationEditor. When I load an IFR flightplan made by PFPX or the default VOXATC one to eppley into flightplan trainer I get clearance to climb three thousand and to turn to 180 after departure. I have selected an airliner call sign, though. Did I forgot a setting.

I have noticed that there is no add-on.xml file and VoxATC.dll does not show up in the P3D .dll file nor in the add-ons file? Is that normal? I am experiencing frequent crashes at the moment and I am currently looking for small details that are easy to overlook...

Hi to all, I have a strange problem, suddenly my Vox 7.43 doesn't take into account the Active Sky Winds for departure runway assignment anymore. It has worked without problem before and I haven't changed anything. Reinstalling ASP3D, its P3Dv5 connector and Vox 7.43 didn't help, of course I've run the Vox Indexer several times. If I set the winds at the departure airport by P3Dv5 weather menu, the Vox departure ATIS correctly respects the winds. Any ideas whyt I could try? Cheers draci

Hi Lads. I'm aware that flytampa released Eham v2 yesterday, has anyone had the chance to test this out with voxatc? Previous issues was it would crash on take off or approach for me to most runways or it would constantly repeat itself and then vox would be unusable after this. Nothing I changed would solve these issues, so I came away from Vox and used another program that did work with flytempa stuff, would like to get back to vox though

I have a little problem, since I changed Micro Vox helmet asks me every time to repeat my ad. Systematically, it's tiring

At KBWI everytime i get my taxi instruction it says fatal error and gives me this log: $$$$ Thread time overun : at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo) at System.Environment.get_StackTrace() at com.intworkings.voxatc.ThreadCheck.Sleep(Int32 milliSecs) at com.intworkings.voxatc.FSUIPCInt.ProcessSimconMessages() at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) at System.Threading.ExecutionContext.RunI…

Good day all, I hope everyone is good. I have been using VOXATC For sometime, and I love it, it’s a great program, It has its quirks and frustrations but for the most part but I’ve been able to find solutions on this board and the developer has eventually gotten back to me for others (busy guy I bet). Now to my point, I recently Upgraded to prepared 3-D version 5.2 and had to upgrade fsuipc to v 6. I have an FDS cockpit for the A320 Which requires me to have two keyboards, I will get back to this, I recently bought a new keyboard for my second. Sooo, I’ve been pulling my hair out uninstalling and reinstalling everything over the last five days because the…

Hi guys, I seem to have developed an issue since getting FSX solo which allows me to use my real world headset with VOX ATC. The voice trainer does not recognise me and in sim I get "Last aircraft say again" on every single transmission and once I say it again picks it up perfectly...Very annoying to have to repeat every transmission.. is it me or has anybody else experience this? Dave

Hi All.. I have a clean windows 10x64 and P3dv4.1. I have P3Dv4.1 installed on separate ssd by its self. The folder is shared..etc, etc, etc but the indexer hangs at P:\System Volume information.....any clues on how to get indexer to finish? I am leaving it on and see if it will complete..doubtful. Thanks, Bob M.

Hi Guys, Had to reinstall Windows 10 after an issue which deleted my location for A2A aircraft.. I reinstalled them but this time away from the main windows drive onto a separate one. Now when I run the indexer it hangs at the first A2A aircraft...although the panel select picked it up. As it is hanging all the subsequent installs are not being recognised. Any ideas?

Hey guys! When doing the Panel Setup, not all of my addon aircraft are showing up. For example, I have the entire PMDG 737NGXu family installed to P3Dv5, however for VOXATC, only the 737-800 BW shows up for the panel setup. When I load a 737-700, VOXATC says it doesn't recognize it and has a fatal error requiring a restart. What do I do about this?

Hi Guys, Before I splash out on Just Flights Traffic X for Prepar3d v 5.2 can anybody tell me if VOX ATC uses their models etc.. Dave

Has anyone managed to get Voxatc to recognise Amazon polly voices? Pilot2atc manages to see them but with Voxatc they are not an option in the voice configurator.

Any early reports? I'll probably download tonight and give it a go tomorrow, but just curious! TIA, CVG

Has anybody yet tried to use Speechelo voices in Vox atc ? Thanks

I installed vox atc into p3dv4.5. I was able to get it to work with all of my addon aircraft, except for the fs labs airbus. It shows up in that plane, but then cases p3d to ctd. I had to manually modify the panel.cfg to even get it to show up, but have no ide why it is ctd. As soon as I remove the panel.cfg modification, it no.longer crashes to desktop. Any ideas?

I am using the demo version of VOX ATC to make a decision whether to buy it. It works in all of my addon aircraft except the FS Labs Airbus. I have followed the suggestions here about how to get the panel configurator to write it correctly in the panel.cfg file, but when I start up P3DV4.5 and load a flight with the FS Labs Airbus, P3D crashes to desktop. Has anyone gotten this gauge to work with FS Labs Airbus, and if so, could you post your panel.cfg file here, so I can see what, if anything I am doing wrong. I sent it to the developer, and he said he could not see anything wrong with mine. He made a suggestion to modify the zerder value, and I tried that, with the…