The VOXATC Support Forum

I had bought voxatc on FEB 11th and have not received any registration code......is this normal to have to wait this long.I have e-mailed them at [email protected] 2 times and wrote a message on their website with my e-mail to write back and NO RESPONSE.....Is this NORMAL..this is starting to get upsetting like they are ignoring me, I just gave them $75 for what????

Hi My VOXATC for the most part works OK. Sometimes out of the blue however it'll give me a "FATAL ERROR". This can happen whilst on the ground, or up in the air. Haven't been able to find a pattern in the errors. This was a problem for me in FSX, but now also in P3D V2.2. It doesn't matter where in the world i fly it will still crash on me every now and then. This can be very frustrating having to restart it and the ATC doesn't pick up on my location (still talks to me as if i was on the ground at the starting location) Is there a error log located somewhere that might hold some clues as to why it so randomly crashes? Using the latest version 6.34 with P3…

Hello! I started using VoxATC again after a year or two. During this time, there seem to be a few new updates published. After reading this forum about the possible errors and failed initialisations, I was hoping, that someone could "hold my hand" for a second and help me through the current situation. Here is where I'm at: I'm using version 6.05 and it works quite OK. Disappearing AI aircrafts and descent instructions in high terrain are honestly my only problems at the moment. I'm also running VoxPopServer with VoxATC. Now: 1) What has been the success rate when installing from 6.05 to 6.34? 2) Is the 6.34 an update or a full install? 3) Do I first…

Can any one help? I have just installed Vox v6.34 after instal when I go to Start menu/Vox No matter what button I push Vox re-runs the Indexer Then the Panel configerator which is devoid of aircraft as it was run at the instal Then it starts all over again consiquecialy I cannot change my Call sign or set up my A.I.% Joysick Configeration or anthing else for that matter I've Uninstalled/Reinstalled the programe several times Regards Mike

Can any of you guys tell me how to use VOX ATC properly? I'm familiar with using ATC and what to say, but I can't seem to use this program properly to save my life. Before I go, here's my setup. Windows 7 64 Bit FSX with Acceleration Pack installed Numerous Third Party Aircraft and Scenery added on VOX ATC 6.34 JLong321

When I start VOX ATC server, I get the message "no such host is known". What does this mean? Does the program recognize FSX with Acceleration? JLong321

I downloaded and installed VOXATC 6.34 today. It is working fine until you close down FSX or P3D v2.1, the voxatcserver.exe (Voxpopserver continues as it is supposed to) continues to run and is not closing once either sim is shut down. I discovered this after setting VOXATC up today. I went in and out of the sim 4 times to make adjustments and every time I started VOXATC my system became very bogged down. I opened task manager and there where 4 instances of VOXATC running. So I rebooted my computer and they where gone until I stared up VOX again. I went in and out of the sim (Both FSX and P3D) and every time I stared VOXATC another instance would startup. I had to use tas…

I can't VOX ATC to initiate after a number of attempts. Even though I have set up a flight plan, I still get a fatal error message within the window. JLong321

I had voxatc working properly with Aerosoft MyTraffic 2013 and then i uninstalled MT2013 due to some issues i had on my pc. Now when i reinstalled it, Voxatc would not recognise it and and would only load the default AI. But i had installed some programs and even switched to DX10 with steve's fix during the time when both were working well. Anyone help me please! But the problem is not with MT2013 cos when i set the traffic slider on fsx i can see the traffic at the airports. I have uninstalled and reinstalled both programs endlessly and nothing seems to help. One thing i have noted though is that on the MT2013 flight editor, in Number of Scheduled flights: it says 0(…

If you are flying around without a flight plan and dial in the tower or approach of the nearest airport that you would like to land at, it only allows you to dial in their ground frequency. How do you contact their approach or tower to request a landing? Thanks.

Whenever the green taxi lights come on, there's a loud buzzing noise and my FPS dips in half. As soon as they go off, everything is fine. For now I have disabled them, and everything is ok without them. Except I'd like to use them! Anyone have a fix for this problem?

Hello Everyone I need a help please First of all my FSX system is: 3 CPU's 1.Run's FSX 2.JETMAX 737 (Client) 3.Weather Station (Active Sky Next). All of them are networked The FSX CPU is intel Extreme Core 990x OCZ 12Gb Ram Hard Disk: SSD 250Gb Graphics Card: Nvidia 680 GTX FTW 4Gb Windows: 7 Ultimate 64bit Running 3 Monitors on Surround Feature in Nvidia 4th is extended Display FSX GOLD Version VOXATC Version 6.34 with 4 IVONA Voices iFly 737NG 3.2.1 With cockpit Builder Edition Fly Tampa Dubai Rebooted REX Direct Texture ORBX FTX Global+Vector Fs Dream Team Ground Service X FSUIPC Last Update Fs Wide over the Weather Station CPU. My P…

I have installed VoxATC 6.34 for use with Prepar3D v2.2 and cannot get beyond ATIS with VoxATC. A flight plan has been loaded in the simulator before enabling Vox and speech training has been undertaken. Has anyone else had experience of this and how did you fix the problem, please? I am running Prepar3D v2.2 +Hotfix on a Windows 7 64-bit system, and am trying to use Vox with the PMDG MD11 (which I know works very well in P3D).

What does this mean. I pulled this from the Error Log it occurred on 3 separate instances as I tried to restart VOXATC. ATSO exception Object reference not set to an instance of an object. at com.intworkings.voxatc.ProcedureAirspaceRoute.RationalizeAltitude(ProcedureSegment ps, Position startPos, Position posIn) at com.intworkings.voxatc.ProcedureAirspaceRoute.GetNextPPosition(Position pos) at com.intworkings.voxatc.ProcedureAirspaceRoute.GetNextPosition(Position posIn) at com.intworkings.voxatc.ASSTransiting.SetupNextLeg() at com.intworkings.voxatc.ASSTransiting.Moved(Position posIn) at com.intworkings.voxatc.ASSDepartingBeforeFirstSidWP.Moved(…

Hello I Notice the new Update has no hand-over to tower Freq the previous Update has that option Any idea

Hey guys, I got a problem in voxatc. (voxatc 6.34 fsx win7). I can't call out the panel by pressing "O" or select an option by pressing number keys. My keyboard just simply not works with voxatc. I assigned the PPT on my joystick, so that I can still use it. However it is annoying because I can not select any option in the prompt panel and every time when I want to pull the penal out I need to go the "view" and check the "voxatc panel". Anybody have the same problem or any suggestion?

When I reach the Top of Descent, how do I request a descent? Thanks,

I have the vox setting volume set as high as it can go but I still cant hear anything on my computer speakers with everything else going.on, is there any other way around it besides wearing headphones?

Hi all, I upgraded to VoxATC 6.34 and ever since I have had a fatal error that occurs immediately after start up. I know there have been a few of these raised, but no solution so far has cured my problem. The old 6.20 version worked fine. Setup: Along with FSX I run: - Air Hauler - SPAD - Track IR - Frictionality - Opus Air Hauler and Frictionality are my two latest add-ons. What I have tried: - Re-installation of 6.34 - Uninstalling Air Hauler and Frictionality - Checking sound settings - Ensuring US English is selected - Uninstalled both VoxPOP and Ivona voices to use just MS Anna - Tried the standard 'create flight plan/save/reload'…

Hi Guys, I use UT traffic (and have used the bridge) but I have added an extra flightplan with repaints and models but these don;t seem to show in Voxatc. Do i have to import these into UT2 and then run the bridge again or should these be picked up by Voxatc regardless.

Hey follow VOXATC users, I get fatal errors every now and then. Not all the time, and I can't seem to find any pattern to them. Many flights complete with out any problems at all. Last night I got an fatal error on final into KORF, just before I expected the "cleared to land" from ATC. I'm running all default voices, no add ons other than megascenery, Cerenado B200. Is there any log somewhere I can look at? I would like to do some troubleshooting myself before contacting the developer. I'm running 6.2, just noticed 6.34 is out, I'll try that but still wonder about any logs. Thanks again for any help.

If you save a flight in Prepar3D v2.2, the flight is in xml format with a .fxml extension to the saved flight. VoxATC 6.34 still requires a .FLT file (akin to FSX, I presume) to add SIDs and STARs using the setup facility and does not appear to recognize .fxml files from Prepar3D v2.2. Am I doing something wrong, or is there laborious editing to do to get the flight file into .FLT format? How then, do we add SIDs and STARs to VoxATC 6.34 in Prepar3d v2.2? Please share your experience and point me in the right direction, if possible.

I downloadaed the demo yesterday to give it a try and I have a few questions. Is it possible to use combination keystroke or only unshifted keys? Ex shift-ctrl-a. All my unshifted keys are already assigned on my keyboard. Similar question for joystick, can we use fsuipc virtual joystick button? For the rest, seems a great program. I experienced however the problem of reduction in volume after a pause.

I am using a CH Eclipse Yoke to assign buttons within VoxATC 6.34 and cannot get the Ident and FO buttons to work within the sim (Prepar3D v2.2+Hotfix). The assignments can be made succesfully within VoxATC but the buttons do not work in P3D itself. I have checked for conflicting button assignments with P3D but these are non-existent and all other assignments using buttons on the yoke within VoxATC such as PTT control work correctly. Has anybody used a yoke for button assignments in VoxATC and have you managed to get the Ident and FO assignments to work in the sim (either FSX or P3D), using the yoke buttons themselves? Your comments will be most welcome.

I am using p3d v22 which works fine on my computer and Voxatc, but Voxatc stops communicating after take off...I get the message to leave the area but then nothing else. I have to descend, approach and land without ATC instruction. I also don't have the taxi guide lights although I have not disabled them. I am using the FO and loading a flight plan before activating Voxatc. Am I doing something wrong!