The VOXATC Support Forum

Hi can anyone help me please, my voxatc runs just fine but when i come to install voxpop and try to run it with voxATC it crashes?

If I have abort takeoff, how do I tell Voxatc/request another takeoff? Thanks Tim

so i had a great flight with voxatc from CYYZ-KMIA and i think they will be getting my money, if for nothing else then for the fact I dont have to press 1's and 2's lol or about anything on the keyboard and it understands me better then SIRI LOL. OK my question though and I do not know how real life procedure is done but I found it odd.. Near the arrival i was given ANNEY2 arrival with OMN (ormond beach) transition so good i quickly found them in FMC and entered them and executed and all was good... except one thing... in the FMC selection there are many ANNEY2 like ANNEY2.## where the ## is the runway number, one for each runway and i was never told by ATC which …

Hi Am trying to do the vfr tutorial flight: Open fsx and load vox vfr Kansas to Eppely.pln Open vox panel and click enable tuneATIS(wrong freq for this airport) and listen to atis then tune international clearence freq then get the green text on what to say push spacebar and ask for clearence vox panel then gives a text message in blue and then nothing more happens... no voice message, no freq message What do I do with this? Paul

using p3d 2.4 installed voxatc run all the indexes etc... so at first run my i had no ai aircraft anywhere... so i turned everything off open voxsetting set traffic there at 30% ... still nothing.... I have mytrafficX installed but disabled all over so it is not actually active at all... so i moved all the airplanes from mytraffic/aircraft to simobjects/airplanes ... ran the indexer again.... I though maybe it didn't want to choose any of the deault p3d airplanes... well still no traffic not one aircraft in sight :( p3d aircraft is set to 0% only active is car traffic at 5% what could i be doing worng also is there any official voxatc forum? all i found …

Just got the demo and i can barely here atc speak its so quiet and my 737 ngx noise just over powers the atc voice. how do i turn it up guys? also i'm trying to re-assign the keyboard short cuts but nothing happens its not letting me change them. thanks

Anybody know a way I can prevent some planes in Prepar3d from being used as traffic . I have some pretty heavy duty planes like cs777 which keep being used as ai. I believe this is slowing my system when using ai. Cheers

Hello, I can't understand the new way of importing a flight plan in voxatc 6.46. In their site they say this " VoxATC will use the currently loaded flight plan. You no longer have to load a flight to change the flight plan, just load the new flight plan and enable" Where to enable? Load the fsx flight plan? I use fsbuild for flight plans.

Is anyone else getting strange altitudes on descent and vectors. 4100, 3100 AND 2100?

There are many options in VoxATC to fiddle with and it is very wise to spend time training with the program. I did about six flights where I loaded up the flight plans in the flight plan trainer and went through all the lines. I don't have to do that anymore. It pretty much knows what I am saying now and I can even change the tone of my voice and sound more natural when talking to it and it will take my commands. My problem that I have and I wonder if there is a way to fix this, is to make VoxATC pronounce locations correctly. Example; I take off from Dallas Love Field a lot and one of the centers I pass through is Fort Worth Center. It is abbreviated …

Some of the airfields that I fly to in real life have right hand circuits for noise abatement purposes. VOXATC/FSX always uses left hand circuits. Is there a way to change the circuits to right hand in VOXATC/FSX?

Every since updating to P3D v2.4 I dont get any GA traffic from UT2 with VoxATC. I run the UT2 bridge correct after VoxATC Indexer and I have both GA and Airlines activated in UT2 before running the UT2 Bridge. P3D Traffic sliders set to 0 when running the simulator. Anyone else experience this The Airlines I see correctly Mike

Is it possible to change the background color of the previous communicaiton window? I would prefer something more dark for night flying.

Hi! I'm using PFPX for flightplanning and I've bought Nav data updates from Aerosoft, but I can't find any map that VoxAtc accepts for SID/STAR....every file I try Vox says "No nav data in file" . What am I looking for exactly?

I keep getting the message "unable at this time" when I request clearance to depart and I just sit there unable to take off. Initially this also happened when I requested permission to start engines. I ran the voice training again several times and got past this particular issue only for my demo to expire. Tegwyn very kindly extended this and I managed to get a little further. The voice recognition appears to recognise my voice but I'm beginning to wonder if the software is mature enough. I don't know if it's the Microsoft voice recognition or VOXATC either way I'm a little reluctant to part with any money if I cannot get this to work seamlessly. I expect to have to …

'unrecognized aircraft' / PMDG NGX unofficial KLM livery VoxATC works fine with my PMDG NGX setup with default and 'official' KLM 738 Livery but I found a KLM 737-700 livery on Avsim and then this error pops up, aborting initialization any ideas what triggers this (in the aircraft.cfg?) ?

Trialling Voxatc at moment still have not decided to buy this or pilot2atc .Only problem so far I usually run my AI Traffic at 40% little impact on fps same setting via Vox and is halfing my frame rate . This is with prep3d v2.3 any thoughts. Makes a big difference if trying to fly cs 777.

Hello, my question might seem a bit stupid but I do not own a win7 English version and VOX speech reqognition would not work with my machine. I am therefore asking whether it is also possible to use VOX ATC only with pressing buttons and not using voice. Thanks very much for any feedback. Kind regards, Tilo

My "free trial" week with 6.34 and things are looking okay. I have my UT traffic appear but interacts with FSX ATC with nothing with VOXATC. I have applied the UT bridge which showed success. Do I need to modify my traffic volume setting in UT utility as well as setting traffic slider in VOXATC? It's obvious to me that setting traffic volume in VOXATC is important but what is less clear is how I am supposed to set in UT utility.

Hi, I just bought and installed the VoxAtc 6.46. I used the version 5 before without any problems so today I bought and installed version 6. I have downloaded and configuerd Popvox as stated in the manual. I've run the indexer and panel config. I have my flightplan created in PFPX and exported to my PMDG 737-800NGX and I have also filed out the SID & STAR setup after saving my flight in FSX at the gate. I press the "Enable"-button and the text "6.46 initializing" shows and after a short while all the vocies one by one says "test" as it should do. But as soon as the last voice has said "test" the text changes to "FATAL ERROR! Disable VoxATC". I've trie…

I have completed the voice training. I load a VFR Flight Plan and do a radio check. I listen to ATC but VOXATC will not give me permission to start the engine. I also seem to get a lot of "Pass your message" and "Unable to..." messages even though I'm following the scripts to the letter.

VOXATC will not give me permission to start and engine. The radio check works and I can listen to ATC. I keep getting "Unable to..." or "Pass your message". If I skip that part and continue it seems to work but I still seem to get a lot of these messages throughout the process. So many in fact that the application is virtually unusable. Alan Apologies when I posted this I received an error telling me that I was not allowed so I tried again only to find that it had been submitted but I can't see a way to delete one.

I hope someone can help me with a problem I have with voxATC 6.46. I can install the program and it operates in FSX. However when I try to run the Runway Number Update I get the following message. Runway Number Update has stopped working. A problem caused the program to stop working correctly. Please close the program. I also get the same problem with the following operations within the voxATC menu . ATC Aircraft Type Name Editor Flight Plan Extras Procedure Pronuciation Editor Select Simulator Voice Configuration I have tried everything I can think of and even contacted the developer, so far nothing has worked. My PC Specs are as follow…

VOXatc-crashed FSX .. I had crash detect ON in the sim. When VOXatc ver 6.46 finished its setup the AI traffic (a 737 in screenshot) was pushing back over my (Delta 630 call sign here is ok, forgot to change it) I was told to contact ground which was ok. When I select any parking location I thought AI could not use it? Also, this AI is not parked properly .. on the yellow line.

Hello, I'm a fan of voxatc, so much so I thought I'd purchase the software and enjoy it every time I went flying in FSX. I browsed to the voxatc website www.voxatc.com clicked register and using paypal made payment on the 29th of August eagerly awaiting my registration email and key.... and I'm still waiting.... still waiting.... I've sent emails three times via their web site email submission forms (don't have the dates as it's done via the voxatc website). I've sent email via my gmail account twice on the 2nd and today the 8th of August. I've just sent another email from my hotmail account just on the off chance the web mail is down and my gmail account has been spam bl…