The VOXATC Support Forum

I just now downloaded the Beta 7.2 program and all voices except : VoxPop Base was not available for download .. got an error screen? Is it still needed for the Beta 7.2 testing.

Hi, just a question, who succeded using beta 7.2 in a networked configuration ? Very interested in getting your feedback. Cheers, Thierry

had to buy fsx se and m$ wont activate my old copy of fsx. just reinstalled win10. voxatc 6 wont work. tried the 7 beta and it crashes on launch. have it on a separate drive and running it as an admin and in win7 compatibility mode. no dice. also, the voxpop base, as of jan/6/17 @ http://www.voxatc.biz/v7v/VoxPopBase.zip is not working. tried to redownload it. been looking in this forum, has anyone got it to work with fsx se?!?

Hi All, I used to have VoxATC back in my previous flight-sim phase, ca. 2009. Back then I don't remember having to deal with the panel, though given how little I remember about that time in general it's possible I did. At any rate, I don't know of a way to initialize Vox now without mouse clicks. My screen reader can't read anything in any aircraft panel, as far as I'm aware. Is it possible to set up a keyboard shortcut to do this, or am I SOL?

I love VoxATC because of its ability to control AI Traffic but because it only uses the aircraft models of Traffic Packages (UT2, Traffic6) etc. and not their schedules it confuses other add-ons which rely on schedule information about the AI aircraft. The best example is Super Traffic Board which can't display meaningful information about the VoxATC generated AI aircraft. All (traffic-addon induced) flights predicted on the board never materialise in VoxATC and get cancelled leading to a very unrealistic situation where all flights but the user flight get cancelled. I would be in simulator heaven if VoxATC could implement foreign schedules or as a second best solution at…

So I don't have to rewrite my issue for a third time, I am pasting a contact email that I sent to VoxATC some weeks ago, in the hope that someone around here may have some information or advice. To summarise, my original help request, I have VoxATC v6, which I bought on disc from RC Simulations, worked fine in FSX but for some reason, since moving to FSX steam edition, I have been unable to complete a single flight without an issue. Problems are numerous and vary from losing contact with ground after taxiing to runway, having both a female and male controller repeat instructions, having to repeat my own instructions to ATC, losing control on approach, being given com…

Requested URL not found when trying to download the Vox Pop base file. Anyone with any ideas?

Folks, Anyone have any issues with VFR flights when trying to contact Utopia radio I get no response back. Everything seems ok up to that point. I get clearance, ground and then asked to contact 122.2 - but then nothing. My callsign is setup for GA and everything appears in order with the flight plan itself. Please let me know if anyone else is experiencing this issue or lead me to what I may be doing wrong. Thanks Tony

I tried today to desinstall my older version of Vox and install the Beta 7.2. I ran immediately in problems with EZCA and ASNext throwing various errors that seems related to simconnect. EZCA open the following window "Simconnect does not answer for more than 10 seconds. Open the configure tool and correctly select the version of the simulator" (I tried several time to select the simulator both with and without the migration tool but was not able to restart EZCA. ASNext open a window "ASConnect error" on opening. and another one about "Ambient control error" a few seconds later. I tried to erase prepar3d.cfg and let the system rebuilt but the problem persi…

Hi! I have done some flights with VOXATC that worked flawlessly, but when I try to take off from enva or arrive at the same airport i get the error "no available arrival/departure runway" Ihave checked if the runway is set to no on takeoff and landings, but it isn't. Everything else looks fine on this airport. I'm usin p3d and the ENVA scenery is Airports of Norway Any Ideas?

Has anyone got it to work? My first attempts have been unsuccessful

Hi guys I am using beta 7 and P3D 3.3. Everytime I plan an IFR flight from a non towered airport to a towered airport, VOX gives me an error message. If I go from a towered airport to another towered airport, all is OK. Does anyone else have this problem? Regards J

Hello, I am looking for advise on how to contact the Vox team. I purchased the software 7 days ago, money was transferred to Vox yet I have still not received a registration code. I have tried contacting VOX through the website contact page, but nobody is responding. Has anybody had any luck getting responses from the software team lately? ~Polmer

have a look at the web-site! Change-log is there available. kind regards, Wolfgang

Hi all, I tried the multiplayer with beta 7.2 PC1 with P3d PC2 with Vox server, remote panel and remote com Connexion between PC1 and 2 seems ok. All green boxes. But * vox doesn't seem to recognize the flight plan i made into P3D. So he is not in IFR mode but on VFR mode * i defined, on the PC1 with the appropiate Vox tool, a joystic button and the Ctrl keyboard button to speak but they doesn't seem to be recognize on the PC2. I can only use the space bar on the PC2's keyboard. Who succeeded to use the multiplayer mode ? Many thanks for your help !!! Thierry France

This is a workaround for anyone who cant get panels to appear. After some trial and error i have found a solution for panels not appearing after installation in fsxse mainly asx and voxatc, the issue is asx and vox look for the main Sim Objects folder in your install directory, the issue is Dlc aircraft from steam create a DLC folder within fsxse's install directory, within this dlc folder is another folder "379233" within you will find another SimObjects folder containing cfg's for all aircraft including panels, to get your addon panels to work open [wherever you installed your steamgames]\steamapps\common\FSX and Cut SimObjects and move it to desktop or another…

Hey Guys, Im new to VOXATC and just got the beta 7 version for testing it out. so far im impressed but I cant seem to get the program to accept a non US aircraft registration. it promts me to put in letters and numbers and letters, and non of the EU countries have it in that format. is there a way around it or am I stuck flying on a US registration lol ?? thanks in advance

Does anybody use VoxATC and MyTraffic 6? I have read that VoxATC controls the AI traffic. Any issues? Especially with the next release (currently Beta 7). Thanks!

I have the Vox installed. It works with FSX. But I cant find Vox on the P3D menu anywhere. Anyone else have this problem? Thanks.

Here's what I want to do..I have two machines.. I have p3dv3.3 installed on one machine and then a second machine..I will call my server.. I am trying to reduce the processes on the P3dv3 machine because my frames rate in p3dv3 is lousy already. My p3dv3 machine is windows 7x64 i7 3770k and my second machine (the server) is an fx8150 amd machine. I do not have p3dv3 installed on this machine. I guess what I am after is seeing the green window on the p3dv3 machine and all the other processes for voxatc on the server.. Is this doable and would someone tell me what to install where. 1- where to put the main voxatc (on what machine) 2-The netserver on what machine(s) 3-…

Hi, flying pmdg 737-800ngx, planning with SimBrief and using VoxAtc6.46. I get my STAR for approach. I always get my descend way too late, so I never get down to the landing height on time, except I nosedive at the speed of light. I googled and only found remarks about descend too early. I surely hope that someone can help me to fix this because like this it doesn't make sense to use Voxatc if I have to "organise" my descend myself. I will appreciate any hint or help. Cheers, Luc

Help with this will be very much appreciated fellas. For some reason ,after having just installed the Alabeo Twin Star, it does not appear in the panel configurator for VOXatc. Normally after installing a new aircraft it appears in this panel and then after running it becomes compatible. At first I thought it may not need to be run, having not seen the aircraft appear, but after creating a flightplan and looking for Voxatc in the FSX menu, it is not present. Any ideas guys?

I may have missed something but on the first page of the updated vox website it says try version 7 beta "free for 7 days", but on the vox 7 beta page it says the beta "will work" for 60 days. Which is correct? In any event there is no option to spend any money to make it work longer, so what happens after the 7 days , or the 60 days? Back to frustration?

Hi I'm trying the v7 beta with some success in P3D 3.4. However ATC keeps saying last aircraft say again and it takes about 4 or 5 replies to recognise Any help appreciated. Jay

Has anybody used Beta 7 in a networked configuration? I am getting ready to install it and start testing it out. Are there any specific steps that need to be followed? Or just follow the instructions for beta 7 on the website? I will probably wait until this version is RTM before considering purchasing it. In beta testers opinions, how stable is the current beta on a scale from 1-10, 10 being highest?? Thanks!