The VOXATC Support Forum

Hi, can someone tell me how I'm be able to install the VOXATC Panel into the A320 of FSLabs? If I use the Panel Installer the A320 is not shown there. Thanks in advance... BR

Just sits there and does nothing. " Says Initializing" Still hangs on indexing at P:/System Volume Information but I cancel and it gives me the message about not installing right but I don't know if it has anything to do with the initializing phase. So frustrating and a waste of valuable mental resources. lol Thanks, Bob M.

I thought of gettting vs 7 but I'm not sure where to enter ->>VoxATC Version 7 Upgrade for V6 users( Please enter Serial no and copy Invoice in notes below) ) Where are the notes below on the site ?

I have just installed the demo for P3D v4. I have loaded up a flight plan and the panel comes up OK. All seems to work but I have no sound. When I go into VoiceConfig.exe and click on the Microsoft voices, I get nothing. Zilch. I have Microsoft Speech Recognizer 8.0 for Windows (English - US) selected in Language and the sound set to max in the voice config. I get engine sound out of P3D and can play music, so I do not know what the problem is. Any help greatly appreciated. John

is there anyway to ask for a direct-to waypoint ? Can't find the option ! thanks

Ok I have run a search on here and even if I found two threads about my issue I'm none the wiser. How do I install the voxatc panel in the md11 ? Fool proof instructions appreciated, I did try editing the panel.cfg on my own and ended up with voxatc working once. Then. i relaunched fsx-se and the panel was gone lol.I tried again and it would show up in the 2d panel but not in the Vc. A real mess. Thanks in advance. Thanks

Since the words "with you" are redundant and not used in real ATC communication (or "should not" be used), I would like to remove these words from my responses to VoxATC. Is this possible?

Hi all, I am using P3Dv3 and the latest version of VoxAtc. I build my flightplans with Simbrief. All Airac cycles are up to date I am loading a flight plan into P3D thru flight planner. I then go to flight plan extras and load the flight plan there, check the box for no vectors, select a hold, select a flight plan to divert to, then click save at the bottom of flight plan extras box. When I click the save button the save button goes dark and nothing else happens. Should I be seeing something more than this? Should another option come up such as "save as" to save the plan? The only other option I am seeing is to close. After doing the above steps I try to fl…

The fifth batch of Carenado updates for P3Dv4 just became available and I installed three of them: B200 KING AIR HD SERIES FSX/P3D C90B KING AIR HD SERIES FSX/P3D V35B Bonanza FSX/P3D I ran the indexer, installed the panels and all three give me fatal errors. It's strange that it would be these specific planes that do this?

I have 7.4 and up to a couple of days ago I was very happy. Now VOXATC seems to make my aircraft go crazy. It takes off by itself at 80 knots, and is uncontrollable. When I take off without VOX no problem. But when I make my first communication it happens again. I have uninstalled and reinstalled, no joy. I have also checked controllers and aircraft, I'm using only default aircraft. I'm pretty sure it is a VOX problem. Please help!

This is a question for everyone and a huge VoxATC problem for me. For single runway airports without a parallel taxiway where the AI have to use the runway for taxi and make a 180 degrees turn just before takeoff (backtrack I think its called) Have you noticed that while making that final turn to align with the takeoff direction that AI just disappear. Why is this, has anyone noticed this or is your AI taking off like normal in these situations? Might it have to do with the turn radius, I dont know what to do. Unfortunately many Greek airports where I fly lack that parallel taxiway and need to use the runway for taxi just like in real life. mike

I fly both Airline IFR and GA VFR - Is VoxATC 7.41 worth the money. I have bought Pilot2ATC, PF3 and Pro-ATC all of which have their limitations, so far I prefer Pilot2ATC of the three. I have also tried Vatsim but coverage is very limited and you are at the mercy of the Controller, very often on final Approach he or she will just clock off, its happened several times going into Gatwick and if you complain on the forum you are told 'they are volunteers' the fact they have just ruined an otherwise good flight doesn't matter, so I've given up with Vatsim. Going back to VoxATC I have tried the trial version but have noticed some very odd Ai behaviour especially o…

Hello, I'm a big fan of your product VoxATC Yet I found a problem for months and trying to solve it now. I use VoxATC 7.41 with P3D v4 When I try to departure from RJBB, which is Kansai Intl in JP, there will be a fetal error message and no AI traffic could be showed. AI traffic can be showed by default AI traffic setting. And Fetal error also showed when I approach this airport. Here is what I found in Err.log. 71509140 Ins Text set : Tune to kansai ground 121.600 71509140 Prompt disabled 71509140 Prompt Text set : ElevationDataSharp::SetSquareSide Invalid file size 1982464 in N34E135.hgt ElevationDataSharp::SetSquareSide Invalid fi…

As I am transiting south from KCAE to KOPF I routinely hear Jacksonville Center trying vainly to get one of the AI aircraft to squawk and identify.....over and over again.... and I must listen to this frustrated controller until I am handed off to a different frequency. Any suggestions about how remedy this situation? Thanks! John

Hi to all, according to various posts in this and other forums , VoxATC should work well with fsAerodata. However, this is not the case for me so far. I installed fsAerodata according to the manual in FSX. However my VoxATC (I still use Vox version 6.52 because I consider it the most stable and bug-free version) does never stop initialising. A problem which never occured to me before. Where is my mistake? I double checked in the scenery.cfg that the two folders inserted by fsAerodata are present and enabled. fsAerodata has higher priority than all my add-on airports and nevertheless AvilaSoft EFB (after a scenery index update, of course) still shows the comm freque…

I am about to pull the card on VoxATC and hoping I can run it across the network on a second computer. I know it is supposed to be possible. However, can anyone offer some help... if I have VoxATC on the client, can I still use the button on my yoke to activate the 'press to talk' function?

I am going to try the new ver 7 beta next week. I tried the old ver 6 a while back, but the old ver used to vector me half way around the planet before I got to finals. Has this been improved in the new ver 7? Thanks for any replies. John

I flew VFR from KSBA to KSFO using FSXFlight to send GPS data to ForeFlight. It worked perfectly. I was able to see nearby aircraft displayed on the moving map in ForeFlight. As I approached KSFO I was handed off to approach given vectors that made sense and as I got closer to the airfield, I could see that my little Comanche was being placed on a circular path inside of a larger circle of passanger jets. I could Also see a gap in the circle, and figured that’s where I was going to go. I kept following the vectors and VoxATC, slotted me right into that gap. I was handed off to the tower and cleared straight in for landing behind an airbus. I made sure to keep my flight pa…

Hi there, I am having difficulty hearing the instruction. I have set up the mic on my headset - but I cannot seem to get all the VOX ATS audio to play through my headset. Is there an option for this that I am missing. thanks

Is there a proper way or protocol to terminate your communication with ground at your destination airport and shutdown once you're parked and have shut your flight plan with the proper FSS? Not being a RW pilot I am word not allowed regarding this procedure and I can't seem to find a reference to the proper procedure in the VOXATC documents. Any help would be appreciated. Thanks! John

I was using voxatc with p3d v3 and used to load up flight plans from the pull down menu and voxatc would recognize the flight plan, BTW I use fsuipc and I have checked in the misc tab the Load flight plans option and when I tried to do it in p3d v4 my screen just flashes and nothing happens. So my question is HOW DO I LOAD UP A FLIGHT PLAN FOR VOXATC to use? PMDG 777 btw

I have installed VoxATC 7.41 (main program) on the FSX SP2 server. The VoxATC panel was installed into the aircraft I was using. VoxATC Remote Panel and VoxATC Net Server is installed on the client. I ran the VoxATC Net Server and VoxATC Network Client on the server. Then, I ran and enabled the VoxATC Panel on the client. The VoxATC Panel of the VC was not enabled. The traffic was injecting into FSX and I could hear the AI requesting clearence. The mic on the Laptop was activated and working. I clicked the button on my joystick and also tried it via the delete key to talk to ATC. I couldn't hear the sound of pressing the button and ATC didn't respond. The joystick...…

I am having difficulty contacting my local FSS to open my flight plan. Here is the sequence of events VOXATC 7.41 takes me through: 1. Bring up P3dv4 2. Load flight 3. Load flight plan 4. Enable VOXATC 7.41 (receive instructions to tune ATIS in panel) 5. Tune ATIS (receive instructions to tune clearance in panel) 6. Tune clearance (radio check then receive departure instructions and squawk code then receive instructions to tune ground) 7. Tune ground (receive taxi instructions) 8. At "hold short" I receive instructions in the VOXATC panel to request temporary frequency change to contact FSS. When I request a temporary freq…

I gave up using VoxATC 6 due to various problems like Ai doing odd things, irritating pronunciations like GLIDA PATH etc. Hoping 7.41 would have these fixed I loaded the 7.41 trial version. I normally fly VFR in the UK but had the following problems :- If no VFR flight plan loaded I press Enable but get the message 'Completing Setup' and that's it, wont move to next stage, just locks up. If I load a VFR flight plan from a towered or non-towered airfield, I don't get the opportunity to file the flight plan with FSS or Tower, after the radio check I just get taxi to runway. During taxy I followed a GA aircraft which started to taxy in circles (just like…

I had a problem, which i fixed by reinstalling p3d, that when I save a scenario, and exited P3dv4, and came back later in the day, all of my waypoints were missing and I was on a great circle flight to nowhere. Never had this problem before, and I have not had it since I reinstalled but have not tried to save with Voxatc enabled either! Any feedback, guys/ Thanks Cathy