MS FSX | FSX-SE Forum

Folks, My AI Aircraft DJC airbuses (A319,A320,A318) are parked at GATE and noticed just now..they begin to slowly spin away from the jetway in a circle fashion.. the links are aligned to a taxiway correctly..via the ADE current version...these aircraft just start moving..in a circle as if trying to leave..but departure time..is in sleep mode.. Need some tips..on causes...and if a remedy...could be offered... (Scratching my head again...needing some help) Regards, Chris

Would be grateful if anyone has any helpful ideas about this: I've been using FSX-SE in W10 successfully for a while; normally fly the aerosoft A319 with ASN and GSX , using UK2000 or (mainly aerosoft) airports. Last week, all of a sudden, I had a problem when I tried to update the airport position in GSX because afterwards most of the switch and button clickspots stopped operating - you could hear the click, but no action (ie the switch didn't move or button light up). Oddly, at the same time I could swap pages on the MCDU but not input any information, and I could swap views for example inside and outside the aircraft. The same problem occurs when loading ASN …

I have google searched this topic, and most of the threads are a few years old. Thought I would post this tread to get more recient feedback. I am looking at My Traffic 6. Is there any other Traffic add-ons I should consider? Thanks!

Hello, first of all I present myself, I'm Marc, Founder of Aviana Simulation and I work with a friend, Stepahane (Aka. EthnicFSX) we are both french and new to scenery developpement We are developing for FSX, FSX-SE and P3D V1/2/3. We finally started Tarkio, MO and it is now in Beta Eestimated Release Date, end on this month (if all goes well) V-Aviation also started a give Away for it https://v-aviation.net/win-copy-tarkio-missouri-aviana-simulations-upon-release/ http://www.fsdeveloper.com/forum/threads/tarkio-mo.436830/page-2 I also have a (personal) project but I don't have enough data for it, tell me if its better to open another topic, (if ye…

Very frustrated trying to install SE. Have been running FSX and acceleration for years with no problems. Installed SE and here are my problems. Re-installed EZDok and old FSX settings. Not working. I get an error message when opening SE about a missing message filter. I re-open it and it starts fine... but no "addon" tab where I can start and initiate my FSUIPC, GSX, etc. I know these are newbie questions but I'm desperate. I wish someone would do a video tutorial about adding SE to FSX. Thanks in advance for your help, Jeff Even Rocklin, CA, USA Vista Ultimate w/sp 2, AMD Phenom II X4 970, 3.5 GHz 8 GB Ram, 64 bit os, FSX, GSX, RC, REX Tex Dir & Soft clou…

Time to get back to work designing scenery while I wait for P3D to not eat VAS for breakfast. I had done a lot of work on this airport before I quit simming now I want to finish it. I have a lot of reading to do. Not like riding a bicycle! Glad I made a bunch of tutorial videos too so I can remember what I was doing.

Hey folks, is there any FSX Ultimate Realism Pack for FSX, or other thing i can use to improve the visuals on my simulator? It doesn't look that bad, just a bit of improvement.

Hi I see you can get Rex soft clouds from steam store, I already have Rex soft clouds for when I used fsx boxed can I use this version in steam or do I have to purchase the steam version. Thanks,jim

So i run three monitors at 5040x1050 resolution. The 2d panels are distorted and get the flashing cursor thing with the main panel. I can solve this for addon aircraft like pmdg by editiing the panel.cfg. BUT this solution doesnt work for default aircraft. What am i missing?? I even tried downloading the 2d panel fixers from this website to no avail and im starting to be desperate since i dont want to install fsx non steam edition again.

On the RPM gauge it says fast engine and there is a little wheel that goes clockwise and anti clockwise has an arrow pointing clockwise that says Right engine FAST just wondered what It means is it your engine revs are too high ? sometimes the wheel spins clockwise or anti-clockwise when the rev counter is in the green? Cheers

Finally released to the BETA team, hopefully this should be a quick turn around and then out for general release. There has be a lot done to ALL phases of flight, with tweaks, re-works etc. The following screen have been changed: Options > In-Flight: the loading of flight plans has been removed. it was to confusing. There is a new option: DATA > AIRPORTS > IMPORT AIRPORT. this allows airports not defined by AIRAC data to be imported into the database The options on the screen when you 'fly now' has also changed. Hopefully it is very easy to understand the options. if you tick the correct ones then once you have received clearance the flight plan will be …

I installed Editvoicepack on FSX-SE. The installation found the correct folder structure and installed everything to the appropriate locations. But when I load FSX-SE and bring the ATC window and issue Listen to ATIS, etc. FSX-SE crashes. It is intermittenly at different points of my flight interfacing with ATC. I uninstalled via the Editvoicepack installer, and everything works fine. Any ideas?

Hi, as a result of issues with x-plane 10.50 I have been looking at my connections for my Saitek Multi Panel/Radio Panel and CH Pedals. With FSX I have these all working through the Saitek Pro Flight Cessna Yoke usb hub. Yesterday I connected these to a 7 way AC/DC powered hub as it looked as if x-plane had a power issue when connected the way above and I wanted to have everything the same and not have to keep fiddling with usb leads. However, when I started FSX SPAD reported no panels connected. Checked all the leads and tried it a few times with same result to reverted back to Saitek Cessna Yoke as the hub and all working OK. Anyone care to offer advice…

Hello. I have problem with autopilot. It disengages when I press throttle down key on gamepad. what's wrong?

Has somebody encounterd the next problem; if I sit on the beginning of the RWY then the GPS shows like I'm at the end, if I move the plane in slew a little to the left then the GPS jumps the RWY at a 90 degree angle from the plane and puts the plane on the left side of the RWY, if I slew a little to the right then the opposite happens and if I move a little backward then the GPS moves the plane to the end if the RWY, tried a repair with the DVD's but nothing and on the net nothing either, ILS landings aren't possible anymore since the ILS doesn't find the airport anymore which jumps all over the place on approach, bad thing about this is that default as well as add on pay…

I bought the Aerosoft Airbus Global First Officer Voice Set including bottom and i can do the update. Can you help me? I'm new in this game Greatings Orlando

Can you recommend a good plane or helicopter thats very easy to control suitable for low altitude VFR scenic flying? I don't want anything complex, since I will be using a controller to fly. Looking to just sit back, relax and enjoy the scenery and not have to worry about anything else really. So base on that, what would you say is good?

Hi Everyone!! Not sure this is the right forum, but here goes. I run FSX. I think i asked someone this a year ago or so, and have forgotten. Mostly fly GA, and the only jet is the Phenom 300. Anyhow, here is the question: I want to hangar World Travel, and the rest of the fake airlines and replace with United, American, Southwest, Lufthansa, KLM, etc. Not planning to fly with Vatsim, or much ATC; just want familiar airlines at the gates when I land. Thanks for ideas!!!

Good Morning! I have a Dash-8 400 in my prepar3D V3 with saitek equipment and Starget board, I have faced problems because even using LINDA 2.6.3, can not operate / activate the command buttons for the functions on the overhear (APU START / APU POWER / PUMP and other buttons. I believe it is an interface problem between LINDA and the DASH-8 400. Using the MACRO MOUSE function in FSUIP 4949, you can only activate the command / (oN) button to reverse this command (OFF ), the DASH-8400 does not accept. the functionality is perfect if only we use the the click of a PC mouse I have a huge crush on this add-ons, need to do work with my the cockpit. I believe solve starting th…

Hi guys, Again, to preface this, I am just in the process of returning to flightsim after a multi-year absence, so maybe I'm missing something painfully obvious. I used to run FS9 back in the days and now on my new rig I'm running FSX-SE. I've been in the process of setting up my sim according to my preferences. My pride and joy of my old FS9 install was the massive amount of realistic AI traffic. So, after installing my favorite addon aircraft and sceneries in my new FSX-SE setup, I started installing all the current AI traffic I could get my hands on, mostly from AIG. I used AIFPv3 to install and made sure the FSX option was checked. Here's the conundrum: I see …

I do not see an unofficial support forum for the Eaglesoft Citation X V2 so I apologise if this is in the wrong place. Hi folks I have recently bought the Eaglesoft Citation X and I am having lots of problems understanding how I should use the autopilot in conjunction with the FMS. I dont have any problems programming the FMS. I am however unsure what the various buttons do on the autopilot. Where can I get help? It is not a software issue but more my lack of understanding of the autopilot and how it should be used. I have Googled but cannot find anything that helps. Regards Colin

I have downloaded the latest file from the vendor and it is Version 3.3. There is an SP2 file on the Leonardo website for 3.3 but it doesn't specify whether it is to update to or from Ver. 3.3 and I can't access it. So I'm hoping 3.3 is current. Thanks in advance.

Shalom and greetings all my pals, While I am doing ground testing of FSX Deluxe with SP1 and SP2 in my new laptop with Windows 10, everything looks good but I am puzzled by one thing. Why does my new laptop's FSX.cfg's [GRAPHICS] section show SHADER_CACHE_PRIMED=1 while my old laptop's FSX.cfg's [GRAPHICS] section shows SHADER_CACHE_PRIMED_10=1693458432 SHADER_CACHE_PRIMED=1693458432 D3D10=0 which is also same on all people's FSX.cfg too? Regards, Aharon

Hi. I've recently just made the change from boxes to steam which I do find a lot better in stability. However I've been watching a few flights on YouTube and their graphics were amazing. I mean they weren't building and mesh that look messed up and blurry. I've spent £200$$ on addons such as: PMDG 737ngx Ultimate Terrain Ultimate ground scenery Aurosoft Heathrow FsCaptain Fs2crew 737 Dream team ground services x My computer specs are Windows 10 64bit 8GB RAM Nvidia 7900 3.8GHZ All drivers are updated and also edited FSX.cfg (only few options edited as instructed by tutorials)z But I still find FSX to be flat, blurry. Night time light…

Hi All, I have had to my folder entitled "Flight Simulator X files" to a new location. Can anyone advise me how do I "tell" FSX where the new location of the "FSX Simulator X Files" is please so that FSX can find its flight plans. I checked the FSX .CFG file and could fined nothing there. Thanks. John