AxisAndOhs Support

I'm currently trying to increase/decrease the light brightness on the default asobo 737 max 8 for my stream deck plus. I have it right now from 0-100% on a rotary knob. and I cant seem to find a way to make it go up by increments like 1% or 5%. From viewing the event viewer all i see is for example "PDSTL_LIGHT_PANEL" with no indication of increase or decrease in the event viewer of it being a separate event. Is it possible to do it, if so how? Would a script help?

Hello, I am trying to do something that I would think would be easy if I had any clue to what I was doing. I want to take the variable COM ACTIVE FREQ TYPE:1, String and change the out put based on the value of the variable. "ATIS" - ATIS "UNI" - UNICOM "CTAF" - CTAF "GND" - GROUND "TWR" - TOWER "CLR" - CLEARANCE DELIVERY "APPR" - APPROAACH "DEP" - DEPARTURE "FSS" - FSS "AWS" - AWOS I know it's a very minor issue but I am really trying to learn how to use RPN and I thought this would be a simple project. Here is the latest version of my RPN script: (A:COM ACTIVE FREQ TYPE:1, String) 'ATIS' scmp 0 == if{ 'ATIS' } els{ (A:COM ACTI…

Hello, I am trying to create a MultiGauge but when I click the Add Image Definition or Add Text Definition nothing happens. I have a StreamDeck profile that I downloaded and they have created a MultiGauge with the Image and Text. I can click on the drop down and see what definitions they have created but I can't seem to open them or look at them. I tried looking at the manual but could not find the answer. Can someone please help me understand the MultiGauge and how to create/edit the Text and Image definitions? Thanks@

Hello, and thank you for this great piece of software. I have set up almost everything I need, and it works great with the Saitek X52, Stream Deck, PXN V10 pedals for rudder control, etc. I even got a six-position car sim manual gearbox controller assigned to drop flaps and control "gear down and up" on the A2A Piper 250—it even makes the same sounds. 😉 As I experiment with various approaches to setting up a trim wheel using my PXN V10 steering wheel, I have encountered a problem. The Windows 10 Game Controllers app clearly shows precise movement of the wheel under Axis X and Axis Y. However, AAO's "Add Axis" function does not recognize it. At one point, it…

Im in Fs2020 and tried guenslis new AAO scripts for teh inibuilds A350 which all work except push and pull knobs on the FCU.. he says he wrote them for FS2024 and he couldnt check FS2020 I found the Lvars documented... on the inibuilds forums they are for example INI_FCU_MANAGED_SPEED_BUTTON Bool Push Airspeed Knob INI_FCU_SELECTED_SPEED_BUTTON Bool Pull Airspeed Knob INI_FCU_MANAGED_HEADING_BUTTON Bool Push Heading Knob INI_FCU_SELECTED_HEADING_BUTTON Bool Pull Heading Knob How would I make these work in AAO to use with an xtouch mini (im sure its simple but…

For 3 of the last 4 days when I push the toggle voice rec button I have binded to my controller, it will not activate voice recognition and it freezes axis and ohs. It will eventually respond again but the voice recognition will not activate. It worked perfectly until 4 days ago and weirdly it was working fine again 2 days ago but only that day. I'm thinking some kind of an update messed it but not where to sure where to start troubleshooting. I have tried using different buttons but that does not change what happens. Thanks for any help.

Hello, I use lorby AxisAndOhs (LorbyAxisAndOhs_Install_MSFS24_4_51_b09) and I have MSFS 2020 and MSFS 2024 on a hard drive in separate folders. I install orby AxisAndOhs, it creates two folders in Community MSFS 2020: 1/ lorbysi-content-fippanel 2/ lorbysi-content-hooks In Community MSFS 2024 nothing. In MSFS 2024, I load A320 Fenix -OK - At the same time lorby AxisAndOhs, connect is activated (green) and deactivated (black), I have the template that I created from A320 fenix but it is impossible to associate it with the aircraft. Could you please help me? NB: I have uninstalled and reinstalled without success

I'm trying out the simple button handling in Axis and Ohs. However, something weird is happening. When configuring a button, the button click works, and shows up as "CLICK" (button 0). Long press also works the first time, and show up as "CLICK" (button 1). However, after this long press, if I do another short press it shows up as "TURN_RIGHT". If I save the button using this "TURN_RIGHT" assignment, it seems to work. But if I save the button when it shows "CLICK" assignment, it doesn't trigger. What is "CLICK" vs "TURN_RIGHT" and what determines which one is triggered?

How does a non-0 layer override a definition in layer 0? Is it based on which device and input is assigned? For example, if I have a standard mixture axes in layer 0, but then create a layer 1 which splits the axis into several defined ranges that trigger different actions (e.g. like a detent condition lever), will that disable the standard mixture axis in layer 0?

Hello, I am not sure this is possible and I can't find anything that says it is, or isn't possible. With a simple StreamDeck Text Gauge (AAO plugin) can I display a value, 'Ambient Temperature, Fahrenheit', for example. That works and returns a value of 44. perfect. Now, immediately after the variable can i "concatenate" (excel terminology but I didn't know what else to call it, a symbol. Example of Current Output: 44 Desired Output: 44° Is it possible to add ° after the variable value? Thanks for all of you help with this question and all my other questions.

Hello, I am trying to get this profile for the StreamDeck to work properly: Avionics Suite for StreamDeck XL https://flightsim.to/file/44350/standard-avionics-suite-for-streamdeck-xl 1. AAO is up to date 2. AAO StreamDeck Plugin is up to date 3. I went through the trouble shooting PDF 4. Installed the Standard Avionics Suite.streamDeckProfile 5. Download and open the "zzz-lorbysi-aao-wtg1000.zip" - in the community folder 6. Ran AAO as Administrator 7. Restarted StreamDeck 8. Restarted AAO 9. Rebooted the PC10. MSFS 2024 - Cessna 172 Skyhawk11. Windows 11 Any ideas on how to get this working s…

I'm evaluating Axis and Ohs as a replacement for FSUIPC. I have a setup where pressing a joystick button down sends a virtual key press to MSFS (only), and another one on button up. Can this be done with Axis and Ohs? I can see the option to send a virtual key press, but it's not separate for up and down (and appears to be a general key press, not MSFS only).

Hi, I made my own SD+ profile with a few pages. One is for the Autopilot. Buttons works fine, and all knobs can change Speed, Heading, Altitude and Vertical Speed. Push are working and pull are taps on the screen. Was easy with the https://docs.invernyx.com/en/md11/integration Now, when Speed, Heading and/or V/S are dashed in the plane, I get -9999 on the SD+. Actually the document exactly says that literally right after the Introduction. So, I need a script. I tried some things, but it doesnt work. Can you give me a hint? You would make my day!!! Thanks, Martin

1. Axis type events (like for potentiometers) now work properly (they only went 50% of the way before) 2. _LEFT and _RIGHT events have been fixed too. You can now do this: For an axis type the DCS event into the "Enter variable" box as a BVar: B:INT_UHF_VOL Set Axis Min to 0 and Axis Max to 65535, Rounding to "Int". For left/right buttons use this: 1000 (>B:INT_UHF_VOL_LEFT) 1000 (>B:INT_UHF_VOL_RIGHT) (variable step size between 1 and 3200) Finally for INC/DEC use this: 1 (>B:AHCP_ALT_SCE_DEC) 1 (>B:AHCP_ALT_SCE_INC) (Fixed step size, can be used with switches too)

I am trying to work out the format for reading a dataref value from XPlane into my Streamdeck. The dataref is sim/cockpit2/electrical/panel_brightness_ratio and the index is 2. If i put sim/cockpit2/electrical/panel_brightness_ratio[2] it doesn't seem to work. I also tried sim/cockpit2/electrical/panel_brightness_ratio, 2 Thanks!

Hey all, I'm looking for some help on how to set up pilot monitoring callouts. Example: I set the flaps to flaps 1, I want to use TTS to speak "speed checked, flaps one". So far I've tried putting this in a single script and calling that script in the Aircraft Automated Scripts, but that's repeating the same TTS while the variable returns 1. So then I added a custom variable that flags if the TTS has been triggered already and then the SPEAK command can be avoided. But to implement this for all flaps positions and every other parameter that I would like to watch, seems overly complicated. Then I've looked at conversation files (as googling lead me to this …

Hello, I would like to create a button on my Streamdeck that displays an image based on the value AMBIENT PRECIP STATE, Number. 2 = None (image1) 4 = Rain (image2) 8 = Snow (image3) I created a script located at MyScripts > Weather_State with the following: (A:AMBIENT PRECIP STATE, Mask) 2 == if{'None'} els{ (A:AMBIENT PRECIP STATE, Mask) 4 == if{RAIN} els{ (A:AMBIENT PRECIP STATE, Mask) 8 == if{SNOW} els{ '' } } } Under Variable1 I have the following settings: Variable A: ( I have tried them all A L P E S B ) MyScripts-Weather_State Two questions. One, the above still only displays the variable value 2, 4 or 8 why is it not d…

On my PMDG 737-800, I have been using AAO checklists without problems for a year, modifying them without any difficulty. After a recent system crash, I had to restore all the voice commands, and all worked fine except that none of the checklist commands would work. When I bring up a checklist script that worked perfectly before, in AAO's Script Editor, and push Test, it gives me four "Please confirm" prompts, then "Checklist end." It acts as if the checklist processor can't find the checklists, but they are exactly where they were before. Any help would be very much appreciated. It's taken me 2 months to recover from the crash, and this is almost the last item u…

Is there a solution for AAO to access to FS2024 Scoped variables from AAO Observe Variables or scripts? I saw your discussion in devsupport.

"Suddenly" I cannot open the UI. Also, MSFS 2020 doesn't ask to open it either (was set as run as administrator). The program functions fine as used with my stream deck plus but just can't open the UI. Just uninstalled and updated to latest as of Feb 18 2025 and still no joy. Pressing the shortcut created does nothing - other than probably starting the program. It used to open the UI so I could see the settings. But there is no UI appearing. I do see it running in task manager background services.

Sorry - posted this in MSFS 2024 forum but probably better here. I am trying to use the voice checklist from the Axis and Ohs site - one labelled CJ4. I have gotten it where I added a script to start the checklist with a button push in my plane so I can start the checklist but I cannot verify any of the checks. I have tested my Mic to make sure it is working and it is. Here is an example from the script of the checklist. 1 (>L:CJ4Checklist) (@CJ4CLFOSPEAK:preflight checklist) (WAIT:3000) 1 (>L:clphase) [](@CJ4CLFOSPEAK:battery) [0](@CJ4CLFOSPEAK:on) 2 (>L:clphase) …

If you please... trying to set a script string value containing parenthesis as follows: (IE:AUTOPILOT_SPEED_MODE) 0 == if{'FMS'} els{'MAN(t)'} but the "els" segment is not recognized. If I remove the parenthesis from the value it works fine. Also if I replace the parenthesis with apostrophes (as documented in the manual) as follows: (IE:AUTOPILOT_SPEED_MODE) 0 == if{'FMS'} els{'MAN 't''} that works fine as well. So I tried the "&" equivalent for the parenthesis-- ( and ) -- but that didn't work. Those "&' codes were rendered literally. Any way to use parenthesis in string values? Thanks.

In FS2024, I'm trying to setup yoke mode switch 1, 2 and 3. But Axis and Oh's is only returning button numbers like it's in mode 1.

4.51 b09 Msfs 2020. Stutters start when on approach. When I disconnect then reconnect to simconnect the stutters stop. I've tested for a couple of weekends. Am using stream deck profile with FSW Lear 35a. Also using Fsuipc. But I have disconnect all addons other than a&o with stream deck and tested. Any ideas what may be going or other ways to test? Must be just with my system because I cant find any other case of stutters with a&o.

Hello all, I am pulling my hair out trying to figure out how to get the new P180's IE's working with my X-Touch mini. When I select anything from the MSFS IE menu under the "ffx" section, for example the engine start L function, no matter what I do nothing happens when I assign a button for it. If I select a different IE outside of the ffx grouping like the landing gear for example I can get it to work no problem. Does anyone have the P180 FFX IE's working? Am I missing something? Thank you so much for hopefully someone taking a look. P