AxisAndOhs Support

Hello @ll, Version 4.50 of AxisAndOhs has been released today. This includes a new/additional variant for MSFS 2024. Here is the changelog - Change: WSH: Added "real" Javascript scripting - Change: Added sound device mapping to numerical IDs - Change: RPN: Added feature buffer length to HIDDEVICE information - Change: RPN: Added methods to reposition and restyle any app windows in Windows - Change: RPN: added Logging options to RPN, AAO Commands and WSH scripting - Change: RPN: added rpnnumval, rpnstrval to AaoCmd in WSH - Change: RPN: additional _TOGGLE commands for Control Layers - Change: RPN: additional commands to switch both button and …

Since the last update to include MSFS2024 compatibility, I get a CTD when in offline mode on both the MSFS2020 and MSFS2024 executable when going into offline mode and selecting a template.

Hi, i have updated to the latest Version of the AaO and i realized that at some point Axis and Ohs doesn‘t recognize my Keyboard Button that i have binded to „Voice Toggle“. Its kinda random dying on my. When i press the Keyboard Button (in my Case „+“) i cannot see a green light in all the active Button Assignments, also when i try to add a new button it doesn‘t detect the Keyboard press. What helps is: pressing the green connect button and disconnect AaO from MSFS then press it again to connect it. Then the Keyboard Press is detected normal until it Dies again random at some point. Can someone else please tell me if this is only the case for me or does i…

Hi, Is working the stream deck plugin under MSFS 2024?

Hi, Thanks for the 2024 version. Today I played with it with my X touch mini and they worked like charm. One problem I detected is the AAO networked client I have running in other PC. It didn't work s the msfs 2020. Didn't change the network parameters nor files. Any clue?

Suddenly AAO has lost recogniion of the Mini since 2024 install. This is in both the 2020 and 2024 sims. Any other reports of this? I tried and teh Mini seems to be working and I also have tried the older version of AAO and the two new versions also. Mystified. John

I've updated the Lorby Network Monitor. With this small tool you can track the amount of data and average speed that MSFS 2020 or 2024 are pulling from the net. You can get it either from the Downloads - Lorby-SI website or from this DropBox link: https://www.dropbox.com/scl/fi/jhiyqrdkmxflgkizwrtag/LorbyNetworkMonitor.zip?rlkey=x44r2jv8fvluv5v0nsp9n4xs1&dl=0

In MSFS 2020 I made a button for my Streamdeck that synced the autopilot HDG with the flightplan DTK for the next waypoint. I did it with the following script: (L:WT_LNavData_DTK_Mag, Degrees) (>A:AUTOPILOT HEADING LOCK DIR, Degrees) The first variable, L:WT_LNavData_DTK_Mag, does not seem to exist anymore under MSFS 2024. Any idea how to look this up now? I'm not finding any information online yet, nor anything that matches under DevMode, Behaviors, and Variables. I found the previous variable from this website, but haven't found an equivalent resource for 2024 yet: https://microsoft.github.io/msfs-avionics-mirror/docs/framework/enums/LNavDataVars/

Current path for data files is "C:\Users\<your-user-name>\Documents\LorbyAxisAndOhs Files" Does the MSFS2024 version of AAO will be using a different path? The reason for the question is, I have not bought MSFS2024 yet. However, after I buy it, I am planning to keep MSFS2020 on the same PC for a period of time before uninstalling it. Thanks.

Basic question, but I can't seem to find any actual statement on this anywhere. I bought AAO a good while ago but have never gotten far with setting it up. It seems to offer a lot more than I need. All I want to do is set up my controllers with a basic set of allocations that will work with ALL aircraft. Nothing very detailed or fancy as I'm not interested in proper piloting, but I do have probably 300 or more aircraft on my system and I'd like to set up a configuration that will do the basics for all of them. I certainly don't want to go through all that lot setting up individual assignments. My main "need" for something like AAO is the capability to have a rel…

I don't know what happened. All was working fine and now I can't assign a link template and x-touch does not work. I've attached the startup log for your review. Any ideas? 11/18/2024 10:37:27 AM.222 : Sound folder set: C:\Users\pasta\OneDrive\Documents\LorbyAxisAndOhs Files\Sounds 11/18/2024 10:37:27 AM.222 : Scripts folder set: C:\Users\pasta\OneDrive\Documents\LorbyAxisAndOhs Files\Scripts 11/18/2024 10:37:27 AM.222 : Web server folder set: C:\Users\pasta\OneDrive\Documents\LorbyAxisAndOhs Files\WebPages 11/18/2024 10:37:27 AM.222 : Grammars folder set: C:\Users\pasta\OneDrive\Documents\LorbyAxisAndOhs Files\Grammars 11/18/2024 10:37:27 AM.223 : Screens…

Tried Axis and Ohs quite a while ago and decided not to use it. Recently when I start MSFS 2020 I get a popup window on the flight simulator. The popup window is outlined in red and is titled AXISANDOHSFIP PANEL. The panel blank and block the underlying view of the flight simulator. If I X out the window, a red outlined window remains, I am able to see through the window and resize and move the window. I can not find any instance on my computer of AXIS AND OHS. How do I get rid of this window?

Hello, I have written a few scripts for the Fenix A320 which I have saved as aircraft automated scripts. My question: Is there a possibility to link these scripts with their parameters to my Fenix A320 template, or do I have to link these scripts again with every new livery for the aircraft? Thanks for any advice Stefan

Hi there, Writing this here because I couldn't find an email address for support. This app looked so promising. I spend over an hour with the demo. I've been using Joy2key in combination with MSFS modded controls but the idea that I could use profiles for each aircraft was very appealing. I'm used to writing macros and using apps like TouchPortal and SimHub Dash and JoyTo Key. I have been following the instruction manual (no clickable index, but still useful, I thought) I bought the app, and immediately discovered that programming the ATC window didn't work. Searched the internet and found a post from the developer: "doesn't work" Ok, disappo…

Hello there, if I understood properly it is not possible to use "and" or "or" in the image definition or text definition in the stream deck plugin's multi gauge. Maybe anyone here has another solution to what I would like to achieve? I currently am working on a Stream Deck profile for the Fenix A320. I would like two of the stream decks button to visualize the state of the thrust levers. It's no problem for all the detends of the thrust levers (e.g. TOGO, ClIMB), since they are full numbers: 0 = FULL Reverse, 1 = IDLE REVERSE, 2 = IDLE,... etc. However, there is also ranges: one of which is that every number below 2 is in the reverse range. No problem to vi…

I'm setting up checklists for the LearJet, and have learned a lot from the documentation and a C172 checklist I found on flightsim.to. So far I've been pretty successful with reading the variables and checking to see if switches are turned on, but I do have some problems here and there with trying to get the correct variables from the sim. I guess I'd like to know if there's any tricks or tips for knowing which one(s) are the correct ones? For example: the one I'm having a tough time with now is the fuel pumps. I know the switch for the left pump is: (L:GENERIC_LEAR_FUEL_MAINPUMP1_1, Number) and 0/1 for off/on. But I'm having no luck in my script with reading …

Hi, Issue: popup screens allow me to cancel the popup but not allowing any selection. For example: https://ctrlv.link/NHqB , on the export scripts popup window, I can select any of the white tickboxes. I can move the popup around, cancel button is working, and the "x" to close the window on the top right is also working. I have the same issue when trying to apply templates to other AC. AAO is running in Admin mode already. Any suggestions?

This just started and I was wondering if anyone else is seeing this: FPS starts to decrease the moment I enable the SimConnect on AAO. Eventually (withing minutes) the sim will hang when the FPS gets to around 2 or 3. As soon as I disable the SimConnect from AAO the sim goes back to 35+ FPS again. However, nothing works, because I have everything mapped through AAO scripts (Honeycomb A & B + Streamdecks). Enabling the SimConnect in AAO repeats the problem - only faster. After 3 or 4 of these instances, enabling SimConnect immediately locks up the sim. If I shutdown and reboot, I am able to use the sim for about 10-15 minutes before the problems starts to…

Hello, I would like to make a script for the FBW with which I can set the elevator trim to zero. My unsuccessful attempts: 1st attempt in the script editor :1 (L:A32NX_HYD_TRIM_WHEEL_PERCENT,·Number)·22·<·if{·1·(>K:ELEV_TRIM_UP)(WAIT:250)} (L:A32NX_HYD_TRIM_WHEEL_PERCENT,·Number)·22·>·if{·1·(>K:ELEV_TRIM_DN)(WAIT:250)} (L:A32NX_HYD_TRIM_WHEEL_PERCENT,·Number)·22·!=·if{·g1} Result: The script runs once and the trim is adjusted once. 2nd attempt in the script editor :loop1 (L:A32NX_HYD_TRIM_WHEEL_PERCENT,·Number)·22·<·if{·1·(>K:ELEV_TRIM_UP)(WAIT:250)} (L:A32NX_HYD_TRIM_WHEEL_PERCENT,·Number)·22·>·if{·1·(>K:ELEV_TRIM_DN…

There are times I would like to rename a script group, either because the current name is too generic, or for other optimization reasons. For example, I had created a My Scripts group, but I want to now export it as a template with scripts, and I would rather change that group name to something more identifiable and so it does not affect anyone else who might have a My Scripts group. When I try to rename the group, it says all external references to the scripts in the group will be invalidated. So I have avoided doing the rename. It would be great to have a new group name propagated to any existing templates and configurations. Is this something that could be implemented?

I changed my button mappings for the Fenix A320 for the AP knobs, to use the MSFS input events, so the knobs will now move on screen. My selections save fine when doing the change button assignment, but when I come back later to view one of them, as if I'm going to edit it, the change button assignment window has switched to MAN, showing K: and nothing in the entry. If I click SEL, it reverts back to showing the IE I had saved for the button. It's only a display problem and only seems to happen with IEs. I haven't noticed this for my other buttons assigned to scripts.

Hi, I have a two years old script written using VKU and VKD. It seams that the Keystroke interfere now with other program short key 😞 How can I convert it back in "readable" KeyPress ? Is their somewhere a translate table ? Thanks for your help. Gérard

https://drive.google.com/file/d/1_R-u-qCF1m7dknL3C8s3AAb6Bc5zWcX7/view?usp=sharing Could use some feedback. Does it have any issues working on your end? Any ideas on what might be done differently or better? I've flown a couple flights and both went well, with a couple minor adjustments made. I'll eventually upload to flightsim.to at some point once I'm happy it's working well enough.

Just curious to know if it possible to create WebCDU for BravoAirspace 787. I tried myself but I am not into it…

I have been running my purchased copy of AAO running MSFS. I have now gone back to running x-plane 12 and wonder if this requires a separate licence??