AxisAndOhs Support

Can any forum member with Axis and Ohs skills (be so kind to ) help me to switch on and off the ASOSO ATRs Landing lights via a single Stream Deck or Bravo throttle quadrant button (I only need the script not help to bind it to the buttons)? There are two landing light switches in the ATR (Left and Right). I allready researched and found the effective Events: MSFS_Input_Events: LIGHTING_LIGHTING_Switch_Light_Landing_1 1 (IE:) and MSFS_Input_Events: LIGHTING_LIGHTING_Switch_Light_Landing_2 1 (IE:) either with parameter 1 = on and 0 = off I only want to use one event button - so I need a script, which triggers two events at the same time (what…

Hi, first post! I recently started using Axis and Ohs and I went all out and setup an arduino and rotary encoders as a midi device. It’s working great for altitude and speed because they have built in INC and DEC events. It feels really good, but I’m having trouble getting the heading bug to work. Things I’ve tried: - Looking for any kind of script that has a INC/DEC for heading instead of just a SET. Don’t seem to see anything - Using a MIDI value coming out of the control as an axis. This works well except that I can only send values because 0-127, meaning I can’t do small changes - Creating a RPN script and binding the LEFT and RIGHT events. So…

Wanting to use a rotary encoder's touch to execute a hot key, namely change a view. Is this possible? Thanks.

I'm using AaOhs since some years, and I like it very much, but after a complete reset of my pc, I can't "act" with profile for FsReborn Piper M500. Some info's: - Profiles downloaded from Flightsim.to - Other profiles as one for Fenix A320 or Black Square 350 works flawlessly - The plane and the livery are recognized - I can see buttons becoming active, and reporting correct infos (lights, indicators, and so on) - I can't press any button, nothing happens for any function but with this plane only, even changing liveries - Re imported XML script, no luck - last AaOhs version 4.22, last update of MS2020, last update of nVidia and Win…

In AAO if I bind my Honeycomb Bravo flaps axis to AXIS_FLAP_SET on the iFly 737 MAX8, the flap lever will move through to full extension properly, but then it won't retract beyond the Flap 1 detent. iFly is using the Asobo ASOBO_HANDLING_Flaps_Lever template, so they aren't doing anything wierd. The flaps are definitely set at 1 even though the lever on my controller is fully up. The VC lever is at the flaps 1 detent, the flap gauge shows flaps 1, and that can be confirmed in the external view. The sim sees HANDLING_FLAPS at 12.5% when it should be 0. It is possible that the value might briefly go to zero and then bounce back, but I can't be certain. It definitely isn't o…

Hello, I'm trying to set up some cockpit actions using a macro pad that has 12 keys and two knobs on it. The knobs actually send button presses, one press for each "click" in a given direction. My intention is to combine button presses on my flight stick with knob turns (and in some cases presses), to manipulate different cockpit dials. For example, Knob2 by itself to select an altitude, with Stick1+Knob2 to select Nav2 frequency. The problem I'm having is that when I set up buttons for these actions (4 total: alt+, alt-, nav2+, nav2-) the button combos for nav2 also activate the solo presses for alt+/1. Is this the intended operation of this feature? Thanks, …

Here's from Windows Event viewer. Not sure if this will help you figure out issue. When I run without A&O's MSFS runs fine. Just thought you might like to know this info just in case there is an issue. I'm a paid user of A&O's Log Name: Application Source: Application Error Date: 5/9/2024 11:45:44 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: Monza Description: Faulting application name: LorbyAxisAndOhs_MSFS.exe, version: 4.10.51.0, time stamp: 0x65ac0a23 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception co…

After your excellent post regarding the Ifly I was able to add all I needed.... I surprised even myself LOL (I now see Guensli has released his profile..so its way easier for others going forward ) Is there any way to increase the speed of the MInimums knob while still retaining the ability for fine control.. In other words if I want 837 for example, to get to 800's quickly (it takes forever going 1 foot at a time) but still be able to make it 837 with fine enough control.. I hope that makes sense !..I use the Behringer X touch .. Thanks in advance

For Fenix A320 only standard MSFS actions to controllers now work. Any actions allocated by scripts do not work. I reinstalled all the Fenix scripts in 'Scripts Editor' (AAO), but no luck. After reinstall, all AAO scripts for PMDG are working fine. I allocate blank profiles in MSFS Options for all my controllers and only use AAO, for control. Any assistance to resolve this, would be appreciated. Cheers Jock McIntyre

Hi.. Im using the app Sayintentions.ai which publish K vars to adjust their apps various volume levels.. How Can I add that as a script in AAO so I can use it with a rotary control up/down on my Behringer X touch Mini... Thanks in advance ! Here is what I need to map K:COM1_VOLUME_SET Description: INT range 0 to 100 (in percent) for the volume of the COM1 radio. Settable: Yes K:COM2_VOLUME_SET Description: INT range 0 to 100 (in percent) for the volume of the COM1 radio. Settable: Yes K:AUDIO_PANEL_VOLUME_SET Description: INT range 0 to 100 (in percent) for the volume of the Intercom radio. Settab…

Hi have been wanting to use the 777 web fms. So downloaded and followed the readme to install Lo and behold I get into the sim and try the remote connection, I get the image of the fms but no screen display, I can press the both sides scratch keys on my iPad and it is inputted into the sim. Just the screen is blank. I can see in the forum that someone had an issue with the 737 one. But that for me is working absolutely fine. can anyone shed any light on their experience please

I've learned how to do a toggle for a 2-way switch, is there a way to toggle a 3-way switch with a single button on my HOTAS? IE: the landing light in the Kodia has 0-off, 1-strobe, 2-On. Can I sequentially switch 0-1-2-1-0? I can simply switch between off and on with this: 2·(L:SWS_LIGHTING_Switch_Light_Landing,·Number)·-·(>L:SWS_LIGHTING_Switch_Light_Landing,·Number) but I don't know if there's a way to do a 3-way with a single button. Ohh, one more question I've had - Is there a way to use AAO to change settings in MSFS? Specifically, I'd like to toggle on/off the AI radio assist.

Greetings! I wonder if this is the right place to look for this kind of help. MSFS2020 entertains a legacy simulation variable (A:AI TRAFFIC STATE, String). The string contains a description of the various flight stages in capital letters separated by the underscore character. I’m trying to display the contents of this variable on my Streamdeck mobile App. Because of the length, the Streamdeck reduces the font to fit the entire contents onto the button. There is an option to split the contents into multiple lines. But this works when the string contains spaces separating the words. I’m old, insinuating I have poor eyesight and therefore, wish for …

Hello, I have a problem with the connection from VRi Combo II to Axis and Ohs. After loading a flight, the bridge to AAO works. I can make entries on the Combo II and it is transferred to the plane. But... as soon as I press a button in the MSFS plane (or work on the EFB) and then turn a control and/or press a button on the Combo II, the connection is lost. Only after I go offline and back online at AAO or the bridge the transfer does work. But.... only as long as I don't do any of the activities described above in the plane. Then the chaos starts all over again. On every plane!! Can you help me? Best regards / Liebe Grüße Thomas

I'm having a problem with layers. I've got the layers themselves set, and when I select them, the correct color shows in AAO. But the Event assigned to that button isn't firing, instead only the event assigned to the default layer fires. Not sure how much this screen shot helps, but you can see that Layer 1 is selected and yet you'll notice the button assigned to the default layer is the one still being sent. Any ideas what I'm doing wrong here?

Is this possible? I'd like to be able to place both left and right brakes on the same slider on my hotas.

Hello everybody, I’m completing a remote control panel for the PMDG 737 using an app called Matric for the visual setting of switches and buttons and AAO to bridge the commands from Matric deck and MSFS. Another application called Simconnect2Matric is the interface between MSFS and Matric so any switch or button movement in the VC is replicated in Matric using Lvars. Everything works fine and all the positions of switches and buttons are synchronized between the Matric deck and the VC of MSFS. The only variables I didn’t found using the Lvars read function of AAO are those regarding the state of landing, runway and position light. Anyone can give me…

Hi Folks, I'm trying to set up an SD+ button for the C700 AP SPD toggle using this code from a downloaded script in AAO (L:XMLVAR_SpeedIsManuallySet,·Bool)·!·(>B:AUTOPILOT_Speed_Mode_Set) However, nothng happens in the sim. When I 'RUN' the script in AAO the toggle works in the sim. I've double checked my spelling in the various boxes, now I'm stuck. Can someone give me a clue as to what I should be entering into AAO? Regards...Kenny.

Just a general question. As far as is known, will AAO continue to work in 2024? Thanks Al

I've decided to make a couple of AAO templates - they are available for download on the axisandohs.com website and flightsim.to - Default MSFS Autopilot - FlyByWire A320 - Fenix A320 - PMDG 737 - PMDG 777 All buttons and switches have been assigned. Autoscripts are provided for controlling the LEDs on the device. With the aircraft, the levers for speed brakes (including arm/disarm), thrust and flaps have been assigned too. Please note the PDF file provided with the package about how to import, edit and use templates in AAO. REQUIRES AAO VERSION 4.40 OR LATER!

I am using AAO with Streamdeck XL Lorby-SI AxisAndOhs plugin. The TextGauge buttons that use On and Off Background Images are breaking because the ON variable I am using (GENERIC_LEAR_FUEL_SEL) works the first time but truncates and cuts off much of the ON variable name once another cell is selected. If is try to edit ONE thing in the cell the variable is cut down to fit the size of the input box and of course then fails to use the 'ON' graphic in the cell. I am just learning and it took my awhile to determine what was happening. I have found no issues with other AAO cell options.

Hello, I have a home cockpit setup, it's a long story but I need to write a zero value to FUEL TANK CENTER LEVEL or FUEL TANK CENTER QUANTITY basically continuously. I have tried many different RPN combinations including 0·(A:FUEL·TANK·CENTER·LEVEL,·Percent·Over·100) and cannot get the Simvar overriden. Is there any way to override this simvar to 0 using AAO? The variable is listed on this page. Thank you for any help!

Hello, I’m using a StreamDeck XL along with the H145 panel from Guenseli (available here: https://flightsim.to/profile/Guenseli/uploads/category/120). His work is amazing, so I highly recommend checking it out! That said, I have a question. When flying the H145, for example, with the Autopilot IAS set to 80 kts and the ALT set to 3,500 feet, selecting an autopilot function toggles its ON/OFF state. Is there a way to select IAS, CRHT, ALT, for example, without toggling the ON/OFF state? I also have a Knobster and would like to use it to adjust various settings in the H145. However, when I select an autopilot fun…

Hello, I would like to use a Toggle switch to switch between various views I have saved. Basically Alt+1, Alt+2, Alt+3, etc It works with the Hotkey but there is no option for a second state image so I can easily see what view is selected. When I select a Toggle , I am unsure what type of Key Down Event to use and how I would send Alt+1 to the sim. How do I go about this, or, is there a better way? Thanks!

This post is my exact question but it is closed for follow up: When I go to the SD software then Lorby-SI AxisAndOhs and add a text guage, where do I put the formula mentioned here? %(E:LOCAL·TIME,·Hours)·s0·int%!02d!·':'·scat·%l0·l0·int·-·60·*·s1·int%!02d!·scat·':'·scat·%l1·l1·int·-·60·*·int%!02d!·scat·(>L:LTIME,·String) I put it in Variable 1, A: and pasted the above code and clicked submit. Nothing is displayed. If i can figure this one out then I can do all of the other calculations that I would like! Thanks for helping out!! Joe