AxisAndOhs Support

Hello guys. I am flying the Fenix A320 I am trying to make a script so my virtual F/O sets the Vatsim unicom frequency (122.800) when i instruct him to I was able to make him set the active directly by 122800000·(>K:COM_RADIO_SET_HZ) I would prefer though that he sets the stby first and then switch so I have the previously available on stby after switching Unfortunately the 122800000·(>K:COM_STBY_RADIO_SET_HZ) does not work Any ideas?

Hi all, I'm a user of AAO from a couple of years, I used it with great satisfaction on my MSFS 2020 especially for the PMDG B737 NG configuraton on a Windows 10 installation. Yesterday, I did a fresh install of Windows 11 Pro and MSFS2020. All is working well, but when I launch AAO (just reinstalled 4.10 b51), it doesn't start. Looking in the event viewer, I found this: System - Provider [ Name] Application E…

Hi, I just got the Blacksquare Duke, and for the most part, I've been able to use AAO to map switches and buttons that aren't in MSFS, but I'm having difficulty with the Surface DeIce. It's a 3 position switch, but springloaded to the center position. The variable for it is "L:var_SurfaceDeiceSwitch" 0 = AUTO, 2 = MAN. I've tried mapping it to my Honeycomb Bravo Flap lever, since it's also 3 position, springloaded to the center, but not having any luck so far. Here is my latest try: https://gyazo.com/181c82af52c82ff97f4d277569328a5f

Interesting phenomenon in the StreamDeck XL (MultiGauge) vs the StreamDeck + (Rotary Canvas). Code below is used in Horizon 789 Mod on the ground for indication of SPD. On the XL the code seems to always default to slot index :0 value of 166 kts, but the exact same code on the PLUS unit wants to default to slot 2 or 3 (200 kts). The work around was always to use :0 index, but any thoughts as to why the behaviors would be different? On the plus if you switch to another profile and then back then it trues up to SLOT :0, which is unusual. Code S: (L:XMLVAR_SpeedIsManuallySet,Bool) if{(A:AUTOPILOT MANAGED SPEED IN MACH, bool) if{%(A:AUTOPILOT MACH HOLD VAR, number)…

For those of you who fly smaller aircraft and own a Stream Deck Plus, I've made a Profile (a simple one) and put it on Flightsim.to here > https://flightsim.to/file/74140/easy-to-use-stream-deck-plus-profile-for-ga-flying

I am building a Com/Nav panel and am unable to delete the event fields (from a previous button I had made). Whenever I clear them and click 'Submit', they just reappear. Is this because I copied the button from another version that I had made on a different page? Do I need to start fresh with a new Rotary Encoder Canvas for every button?

I understand how to use the Stream Deck software (I think). I have installed Lorby-SI AxisAndOhs plug-in and the Default AP demo set. I'm trying to set my own backgrounds and customise the text readout but it seems to be impossible currently as the Stream Deck software doesn't even reflect my changes/edits after clicking Submit/Save. Half the time AxisAndOhs disconnects from MSFS and I can't figure out why (default port in use perhaps?). Q. What do I need to do (step by step please) to be able to see my changes reflected in real time in Stream Deck Settings / AxisAndOhs plugin? Q2. Does it matter what order I start a) MSFS, b) Stream Deck Setting…

Hi, I am currently just trying the demo of AAO to see if it's something I want to buy. I'm trying to use the Z axis on my joystick to control the cabin heat on the Black Square Analog Bonanza, and I can't seem to get it to respond. I get the feeling I'm not using the Lvar provided by the developer correctly. I can get the axis to work with the cowl flaps through AAO, but when I enter the Lvar for cabin heat (L:XMLVAR_Cabin_Heat_2_Position) nothing happens. I don't really know what I'm doing with this, so not sure how to explain it better. Any help would be greatly appreciated. Kat

Hi, Trying to set Left Right brake on the FSS E190 and they are way too sensetive... How can I play with it ? I've tried Curve but it seems to have no effect.... Any advise will be appreciated...

Is it possible to display the AAO webserver checklist as an in-game panel?

Hi, This example is from the AAO manual and I want to execute it from the script editor (not from a file). <Macro·Name=“strobelightmacro“>A:LIGHT·STROBE,·Bool</Macro> (@strobelightmacro)·1·==·if{·1·(>K:STROBES_TOGGLE)·} (A:LIGHT·STROBE,·Bool)·1·==·if{·1·(>K:STROBES_TOGGLE)·} The Red Led on the editor is on to indicate something is wrong. Question is, does the script editor supports macros? https://imgur.com/a/6icp5q3 Thanks.

Hi, Just started with your gauge editor. I'm trying to create some basic text based readouts to monitor numerical data, but my font size is doing something funny. Within the editor, my gauge looks like this: But when outputted to WebFIPS it looks like this: Yes they're ugly 😄 but just focussing on functionality first Any ideas why the font might be changing?

Axis control settings only work when set through MFS Have imported LVARs through AAO, and used as variable. In AAO controller axis shows moving, but doesn't move the throttle in sim at all. Are there any guides for this anywhere please? It must be something simple I'm doing wrong! Using: LVAR:AZP_OV10_THROTTLE_AXIS_RAW:1

Hi. So is it possible to dial stack with the SD+ in MSFS ? I'M using Geunsrli's stuff etc and was wondering if heading, course IAS etc could all be mapped to 1 dial, by pressing the dial, to toggle between modes ? If so, are there any tutorials ? Thnx

Hi, this is my first post so please bare with me… I’m an X-Plane 11 user who really liked the user interface and graphics of MSFS so I changed over a month ago and felt like trying the Streamdeck XL with AAO and this is where I can 100% say my trouble started I stupidly thought that installing the above mentioned add-onns was straightforward, hmmm how wrong was I. Firstly what language is the PDF for ‘webapi fixes” wrote in?, I can’t make head nor tale of it. I’m a lift engineer by trade and have been for some 40 years and know this job inside out and in theory I could write you an instruction list on how to install an elevator of course you would be able to fol…

I recently purchased AAO, and I really couldn't be happier with all the options that have been opened up to me. I've been able to resolve all the restrictions that MSFS has created for handling my planes, so it's been a great find, well worth the cost. I do have a question though. I have a Honeycomb Yoke and Throttle, and they've been working fine with MSFS and AAO, but I do have an odd situation. About a fifth of the time when I turn a switch, the first time I do it, the action doesn't happen. That might be activating a light or turning a switch in the cockpit. The second time I try it, the action always works. I'm not sure what I can do from here, but I'd be glad to hel…

Is there a way to read data sent from RealSimGear hardware? I know that SPAD.next can be configured to read COM ports with the RSG protocol, but I'd really rather not go that route! Has anyone tried this? Thank you.

Hello there, I have been a happy user of the program for quite a while now, but now when I open a command whether it is a button, or an axis it seems to freeze, my mouse moves horribly slow and the program is unusable. It still works just fine on the commands I have already set up, but I can no longer edit. Please help...

I am setting up my Stream Deck buttons for the MS Carenado Beech Model 18 (with the popular Denarq mod) in MSFS 2020. Here are some of the unusual events I have got working. Thanks to this forum and the SDK docs I have been able to create these scripts which toggle the associated controls. Cowl Flaps (L:CARVAR_cowlflap_L, Number) 0 == if{16384 (>K:COWLFLAP1_SET)} els{0 (>K:COWLFLAP1_SET)} (L:CARVAR_cowlflap_R, Number) 0 == if{16384 (>K:COWLFLAP2_SET)} els{0 (>K:COWLFLAP2_SET)} Manifold Heat (A:GENERAL ENG ANTI ICE POSITION:1, percent) 0 == if{16384 (>K:ANTI_ICE_GRADUAL_SET_ENG1)} els{0 (>K:ANTI_ICE_GRADUAL_SET_ENG1)} (A:GENERAL ENG ANTI ICE POS…

Hello, at regular intervals my Keyboard bindings are not working and i have to toggle the simmconnect button so as to regain normal operation. The strange thing is that the bindings of my 2 other hardware are not affected and are always available Sorry if this has been asked and answered before

Hi Oliver, I’ve been using AAO for a while and regularly download scripts from Flightsim.To and have had no issues up to now. However I have tried to import a couple of scripts for the Justflight 146 and they are not importing. I click on import scripts, select the xml script but nothing happens, no error messages and I don’t get the import scripts box that usually comes up to select the script to import. I have tried to reimport some scripts I know work in case there was an issue with the new script package but with no joy. The only issues I have had with my computer was downloading FSUIPC to get a program I wanted to try running and that caused…

I had an odd issue today with importing scripts into the new A300 PW plane from iniBuilds. I imported the scripts file I had used before, but this time I couldn't see any of them when I tried to add a new command. Strangely enough, they are there in the scripts editor but nowhere to be seen when trying to add a new button command.

I'm not really sure if this is an AAO problem or not. Lately I've been having issues with the StreamDeck plugin connecting to the simulator after the StreamDeck has gone to sleep and woken back up. I get yellow triangles with an exclamation point on most of the buttons in the profile when pressed. Closing the SD software and opening it back up resolves the issue. Has anyone seen this? Is it even an AAO issue? I'm running SD version 6.5.2, AAO plugin 33.01, and AAO 4.10 b51. Thanks for any assistance that can be provided.

Hi, I have a question whether only scripts from the "Scripts" group can be assigned to button and is it a by design behavior? Isn't it possible to give access to all the scripts from all the groups?

Hi, I'm trying to set up voice alerts for various things, such as when I cross 10000ft so I don't forget to turn off seat belt/landing lights etc. In essence I want to output voice when certain variables change, such as: (A:BATTERY·CONNECTION·ON,·Bool)·1·==·if{·(VOICE:Microsoft·David·Desktop)·(SPEAK:·battery·on)·} Does this kind of script need to be repeating? And any other things I need to do to get it working? Thanks, Cam.