AxisAndOhs Support

I can't for the life of me get AxisAndOhs to pickup my trim wheel on my Turtle Beach Velocity one. Every other control but the wheel works. It won't pick the axis up at all. It shows up in Windows Control Panel fine, so it works, and I can assign it MSFS, but i want to have it adjustable per aircraft in AAO. Any ideas or anyone experience the same thing?

Starting again with AAO after a while, I´m wondering if it´s somehow now possible to select specific controller profiles in the way, that if e.g. the H160 is selected, the dedicated MSFS controller profile H160 will be automaticly in use? Thanks Norbert

Hi Folks. Can anyone point me to a tutorial that uses either the X-Touch, or a Stream Deck Plus Rotary knob to operate the Magneto switch and Key Start in the Asobo C172? Thanks...Kenny.

Hi, I recently purchased a stream deck and the Axis and Ohs software. I knew there would be a lot to learn and look forward to it but are there any guides specifically for stream deck and the plugin. I'm using a few youtube videos and bits I can find on the forums but I'd love something where I could look for what I wanted specifically. For example, I used the developers mode in game (MSFS) to find the variable for the Autopilot Altitude. I generated a script (in the AAO software) to increase this value by 1000 with a right turn of the dial and copied this into the streamdeck software (into the event for turning the dial). I turned the dial and this set the altitude…

Hello guys. Excuse me for this, i have very limited knowledge regarding scripts. Is it possible to make the software play an audio file? I have made some voice commands regarding gsx and would like to set audio files for different replies from ground or cabin crew. Thanks in advance

Hi, If I enable the Saitek Panel I get the default commands of the panel Is it possible to affect new commands to the buttons using a script like for another hardware? Cheers Pascal Paillart

Hello, I'm trying to use the X Touch mini to change the IRS knobs in the overhead of the FBW 320. This is a 3 portions knobs. I want to use it as close to reality, I mean : -45 degres from vertical line-> OFF 0 degrees from vertical line-> NAV 45 degrees from vertical line-> ATT For doing this I think I need to use a script that will count a fixed number of CW or CCW clicks before changing the value of the variable or the event. Is there any script over there that I can use? any help?. Thanks

I've set up the Logitech Radio Panel with the newly released Fenix - setting the radio frequencies work great without any change! However, I can't seem to get the QNH and transponder to work. It seems the default KOHL_UP and KOHL_DOWN were tied to events that didn't change anything. I changed the KOHL_UP/DOWN to a script someone else wrote (see below) which seems to work. However it is now changing the QNH 3 digits at a time in one "click". Has anyone else got this working? Scripts I'm using: (L:E_FCU_EFIS1_BARO,·Number)·++·(>L:E_FCU_EFIS1_BARO,·Number) (L:E_FCU_EFIS1_BARO,·Number)·--·(>L:E_FCU_EFIS1_BARO,·Number)

I am struggling for a while to try and set my Autobrake selector of my PMDG 737 (MSFS) with AxisAndOhs & Thrustmaster TCA Quadrant Airbus I some how partially made it work on some buttons, but if i select another button selector it goes to off, etc. Can any one tell me what values to set at each button for it to work well (Button 21-25)? any one got this to work on your side? if so, care sharing your settings?

Hi, there seems to be a conflict between FSUIPC and AAO causing a crash to desktop with no error message, seconds after starting a flight. The problem exists in both FSX SE and MSFS, but I'll use FSX to describe it, because it's more convenient for testing. Simulator: FSX SE OS: Windows 11 22H2 FSUIPC4 v4.977 AAO v3.50 b36 Everything was reinstalled for testing, erasing all previous settings in the various paths. No script or particular setting, both in AAO and FSUIPC. In the "DLL.xml" file only "LorbyLvarHook" and "FSUIPC 4" are active. If I leave them both active, when I start a flight after a few seconds I have a CTD. It doesn't always happen…

Hi, I own and use Lorby Axis and Ohs all the time. Since Streamdeck software version 6, the Profile Editor from Axis and Ohs doesn't work anymore and it's a great loss...Is there any hope for a new version compatible with this new software? Thank you, JU

Hello @ll, version 4.0 of AxisAndOhs has been uploaded to the shops. The major change in this version is the option to write scripts in other syntaxes than RPN. On every normal Windows PC you should be able to use JScript and VBScript. As this feature uses the Windows Script Host you can install other languages too, but only these two have been tested. Make sure to read the AAO manual - and be mindful that JScript is not Javascript. It looks similar, but in reality it is Microsoft's (old) interpretation of the theme. And it is missing the entire web context, so you can't use things that depend on window. or document. (etc.) Here is the change log: …

Hello, Yesterday after installing Streamdeck plugin I have trying to set up SD controls but I have noticed that the AAO windows such as script import or template editing do not respond to mouse inputs. I cannot click on the checkboxes, I can't expand or collapse scripts nor can I use mouse wheel to scroll through. I have made a short video: https://streamable.com/uy8opr I have only noticed it yesterday after installing SD but I have not changed anything in AAO in a couple of months so this bug could have been there earlier. Any clues?

I have not been able to locate the variable to set to activate approach mode. (A:AUTOPILOT APPROACH ACTIVE, Bool) works, but it is not settable. In the depth of Developer mode, I found L:WTAP_GP_Approach_Mode which changes in the Developer Window on APR set/unset, but not in the "Watch simulator variables" window. Any ideas? Well, being Dec 31, next year is ok....

Hello Lorby_SI and AAO community: Thank you for developing this powerful piece of software. I have recently licensed and installed to facilitate several aspects of my home cockpit, trying to run everything from a second computer on my local network, but have run into a couple of issues. First, here is my basic configuration; Primary MSFS PC: running MSFS 2020 Second PC: running Axis and Ohs, Streandeck app with AAO plug in, physical Streamdeck Plus connected to USB My most critical issue is that despite AAO succesfully connecting to the simulator (simconnect status ok and aircraft type detected) AND Web FIPS (FCU) working ok, the Streamdeck is not commu…

I just updated. I finished a flight with 3.60 b32 with no issues. Now my templates won't load in offline mode. Ideas?

I am thinking of switching from the X-Touch to the Stream Deck +. Is reconfiguring the profiles simply a matter of going through each assignment and pressing/rotating the relevant control on the Stream Deck (obviously after installing the SD plugin) to tie the command/script to the new input? Thanks, Daz Edit: I've just learned that I basically call the same scripts from the SD software.

Happy new year everyone. I use Stream Deck and Axis And Ohs. I also use AirHauler 2 with MSFS. Today I updated to the latest version on Axis And Ohs(4.00 b46). If I start up Axis and Ohs first then try to start a flight in AirHaler, AirHauler won’t connect to the sim. If i start a flight in AirHauler then try to open Axis And Ohs, Axis And Ohs won’t connect to the sim (Waiting for SimConnect”.It worked fine before i outdated to the latest version of Axis And Ohs.

Good morning Google translation happy new year 2024 I don't know how to write the syntax FBW A32NX I want two conditions to be met to validate a function example : (L:A32NX_LGCIU_1_NOSE_GEAR_DOWNLOCKED)·0·!=·if AND (B:LIGHTING_LANDING_1_Set)·2·!=·if { 0 (>B:LIGHTING_LANDING_1_Set)} els{ 2 (>B:LIGHTING_LANDING_1_Set)} What would be the syntax THANKS

I purchased Axis&Ohs a few weeks ago after buying a Steam Deck Plus. I spent 3 or 4 nights trying to get one switch to work on the steam deck + just to try and learn the process. It's the Dome light on the a320 by Fenix. I watch tons of axis&ohs videos to try and figure out the process. I have other controls working on the stream deck + using the axis plugin. So I know it's working. So after many hours I did a test with the Dome light inside Axis and Ohs and found the commands that make the switch work when using the axis&ohs test button. These are the commands that made it work. Now I can't figure out how to make this work inside stream deck. I tried …

Hello and happy new year to everyone. I am trying to set up the heading button on my Stream Deck Plus. I manage to make it increase and decrease the HDG, but I can't get it to, when pressed the button, in Rotary Encoder mode, set the HDG to the track heading, that is, exactly what the right mouse button does when you click on the heading wheel in the simulator. In the simulator events, I receive (>K:HEADING_BUG_SET), but I can only configure it if I place the value in Key Down Value (e.g., 320) and HEADING_BUG_SET in Key Down Event. How can I set the Key Down Value to the variable's value? Or can only a numerical value be placed? Excuse my English…

What's the possibility of brewing up a Remote FMC for the ini A300? Thx.

Hi, I'm very happy with the AAO Streamdeck and have it working in a lot of situations but have hit a wall. I'd like to increase the A/P Altitude by both thousands and hundreds using the same key, and I don't know if this is a feature request or is something that can be done now and I'm just not figuring out how. The finished programming on the Streamdeck would be to hold down the key and see the altitude increment up by 1,000', once it's at the desired thousands, release the key and then "tap" the key to increase by hundreds. The feature request would be to have the long press repeat. When I turn on the repeat function currently and include a long press function, I only…

Hi, There are frequent crashes of LorbyAxisAndOhs_MSFS.exe and I have no clue where to look. It is mostly the same error, but also very irregular. Application: LorbyAxisAndOhs_MSFS.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.IO.IOException at System.IO.__Error.WinIOError(Int32, System.String) at System.IO.FileStream.Init(System.String, System.IO.FileMode, System.IO.FileAccess, Int32, Boolean, System.IO.FileShare, Int32, System.IO.FileOptions, SECURITY_ATTRIBUTES, System.String, Boolean, Boolean, Boolean) at System.IO.FileStream..ctor(System.String, System.IO.FileMo…

Hi, I need help with those two knobs on EFIS panel : MODE and RANGE. How to program them to change with a X-touch knob roll? Thanks PS: variables are #69991 EXT_EFIS_CPT_MODE and #69993 EVT_EFIS_CPT_RANGE