AxisAndOhs Support

I am having a difficult time finding A&O release notes. Greatly appreciate a link to them. tc

HI. As per the title I've got everything working in the Sim. Using the Desktop FIP the X-Touch mini appears on screen and the buttons / rotaries etc work as advertised. The problem I've got is that my X-Touch Mini hardware is completely unresponsive. Appreciate any help or advice ....thanks

I'm puzzled at how to solve this and was hoping you might have an answer. I'm trying to get the status of circuits in MSFS to show up on a streamdeck. To find the BUS CONNECTION status, you need to pass a BUS LOOKUP INDEX to it first. I can read the A:BUS·CONNECTION·ON var but without passing the LOOKUP INDEX first, it assumes it's always BUS 1. This actually works fine for me on one plane that has everything on BUS 1. I'm trying to implement this on something more complex though and can't figure out having streamdeck use other BUS values. I can get a status using a local variable but only if I toggle from streamdeck. It gets out of sync (expectedly) as th…

Is there a good explanation as to why A&O fails to connect with MSFS at start up. The only way to force it to connect is to first turn off the simconnect button and they turn it on again. It's happening with more than one aircraft, so I am not sure if it's aircraft specific or sim related. I am not running any beta programs, and have the latest A&O. thanks. tc

My Stream Deck can't get a Connection to Axis and Ohs. I tried to follow the Instructions in the Plugin's Manual, but when I open the "Port Settings for AAO Addons" Menu Option I can't change the Port for the Stream Deck Plugin. I can see three Plugins listed in this Window: Stream Deck Plugin, Arduino Bridge and lorbysi-content-fippanel. Only the Entry for the Arduino Bridge is active, the other two are deactivated (Checkbox in Front of the Entry greyed out and unchecked). The Web-API is activated on Port 9080, but the Port listed for the Stream Deck Plugin in the "Port Settings for AAO Addons" Window for the Stream Deck is 8090. But I can't change that back to 9080. Wha…

Good morning Google translation NAV & LOGO Airbus a320 Fenix Is it possible to create a script that would do this: If today's date is odd then set the NAV & LOGO switch to 1 If today's date is even then set the NAV & LOGO switch to 2 I know that it's useless, in simulation it's just out of curiosity THANKS

Hey, I am right now working on lighting up my LEDs on the xTouch Mini with the fbw a320 - and therefore reading A:Simvars like (A:AUTOPILOT FLIGHT DIRECTOR ACTIVE, Bool) or (a:A32NX_AUTOPILOT_ACTIVE, Bool) and many others. So, for e.g. the Baro reference I get values but the aforementioned variables ALWAYS deliver 0. (The LS, LOC etc, too) I am able to send commands to the simulator as well as read some specific values, yet, the fcu-stuff does not change nor deliver any value > 0. Is there any precondition I am missing? Anything that has to be done to make these values work? TY in advance!

I have a button bound to VK_END to trigger the external camera view in MSFS 2020. This has worked for ages (and in fact was working two days ago). Starting today, VK_END is now triggering elevator trim up instead of the external camera view. Pressing the End key on the keyboard results in the expected behavior. 1. If I delete the AAO binding, then the button press no longer triggers a trim up event, so that would suggest that I don't somehow have a trim up event bound to that button elsewhere. Nevertheless, I have verified that there is nothing else bound to that button in my MSFS settings. 2. Deleting the binding and recreating it results in the same behavior. …

Hello, I had the entire system working, StreamDeckPlus with MSFS2020 and I have changed PCs and nothing works for me on the new one. What should I do? Should I have uninstalled LorbyAxisAndOh before disassembling the old PC? I can't find a way to solve it. Thank you

When I add a png or jpg images to a MultiGuage, SliderGuage, etc. where do they get stored and are those retrievable? I know for regular icons in a downloaded Stream Deck profile, I can unzip the profile and it will show me all the icons. It doesn't seem to be revealing the other images in the profile used in your gauges. I would find it useful to be able to access those images as many of the pre-built profiles using your scripts on various sites utilize those kinds of gauges. I'd like to be able to troubleshoot certain ones that aren't working right and maybe re-do the layers or making edits to the icons for my use but I'd need all the images they setup for the gauge via…

Got the throttles working using RPN scripts in AAO and two LVars: Script Group: Honda Script Name: ThrottleOne Script Code: (L:Honda-ThrottleOne)·100·/·(>L:THROTTLE1_SET,·Number) Assigned to an axis, Axis Min = 0, Axis Max = 100 Script Name: ThrottleTwo Script Code: (L:Honda-ThrottleTwo)·100·/·(>L:THROTTLE2_SET,·Number) Assigned to an axis, Axis Min = 0, Axis Max = 100 Be mindful that in AAO the script group name and the script name must be exactly as I specified above or the scripts won't work. The reason is the script variable at the beginning, its name is "L:scriptgroup-scriptname".

I was trying to bind the primer and start switches to my CH throttle quadrant switches, but can't seem to get them to work. I can get default ones, like magnetos and landing lights switches to work but these two are tough to figure out. Has anyone got these working? Thanks, Ed

Hello everybody, I am a new AxisAndOhs customer (I bought the software on JustFlight a couple days ago) trying to get a hold on scripting and assignments. I read many posts here and found some (outated) tutorial on YT, but I am still missing some points. As a first "easy" experiment I am trying to use a MIDI controller (a non-infinite rotary with 0-100 movement from a KONTROL Z1) to control the radio light dimming knob on the C152 (please see attachment, it's the upper knob in the middle of the screenshot). I was able to get the radio lights dimming correctly with the movement of the MIDI pot with the script you see in the screenshot, and now I am trying to …

Hi, not sure of the best way to explain this, but for switches 17-21 (upper left), how do I reprogram those with Axis & Ohs? I want to be able to choose one, and then use 13/14 (plus/minus) to adjust the values. Specifically I'm looking to program Com 1 frequencies with the top 2 buttons, 20/21. I'm very new to the product, so sure I'm just missing something, any help would be appreciated.

I feel compelled to use this forum to thank Oliver and all the folks who participated in the huge thread: https://forums.flightsimulator.com/t/axis-and-ohs-help-and-questions/196415 Thanks to the invaluable info in that thread, I was able to complete the programming of the array of rotary encodrers I just built: I decided to build this after years of using the Knobster and getting quite tired of having to change modes constantly because of the single rotary. This works so much better. I used double rotary encoders with a button push I purchased from propwashsim.com and the fantastic little Micro BBI controllers (I used two of them) from…

I think the latest update for the 787 on the sim update beta has broken the fmc display. Just something to be aware of, understand it's still beta

Hi all I have saved a switch on my joystick for the water drop but everytime a launch firefighter x I have to go back into settings and select the button config and re save am I doing something wrong Cheers Rhys

This is the most frustrating thing ever. Did a MSFS upgrade and now nothing works. How does one change or check the streamdeck port it is using? Under tools - Change Web API the StreamDeck Plugin is red and notes port 43380. This was all working fine until this upgrade. Edit - was a port issue which I resolved. Sorry for the post.

Im flying MSFS 2020 with the honeycomb bravo/alpha. When I assign anything such as a throttle or a button, it changes in in game state like increases the throttle, but the throttle leavers wont move. So the animations do not work when using axisandohs. Software: MSFS 2020 Windows 11

I have an X-56 throttle that suffers badly from [the dreaded] "throttle creep". Is there a simple way that I can temporarily disable (or freeze) all input from both throttles? A script would be ideal, I suppose - but it's way beyond my skill set (!).

Hi! I was hoping you can help me sort out a script. I've been deep diving the internet for days and trying different things before asking here for help. I'm trying to get the BKSQ Caravan to switch the condition lever depending on where the actual physical lever is set on my THQ6. I've found previous threads discussing this exact solution but it looks like it was from before the map LVars to Bvars Extras feature was depreciated so those are outdated. The setting the axis of my lever to 0 to 2 should still work given that's the variable being passed to set the position. I downloaded some various streamdeck setups when I set that up and have imported a BKSQ C208 …

Hi, I'm trying to get the eval version of AAO working, and then, obviously, evaluate it prior to purchase. It runs, it connects to MSFS 2020, _but_, it takes up to five minutes to discover and acquire USB devices before the UI is displayed. About 3-1/2 if I remove devices I'd like to use, about 5 if I attach them. I'm running Windows 11, I have vcredist 14.36.32532 installed (both x86 and x64), and .NET 4.8.03928 I'm running AAO as Administrator. I've removed most of the USB devices I have, to try to rule out device/driver conflicts, and I've blacklisted everything that AAO allows me to blacklist. I've tried wiping out the three config folders as you …

I've built a DIY button-box that uses rotary encoders wired into a Teensy 2.0. It's mostly used for GPS knob adjustments where you're selecting or inputting waypoints. It's emulating a joystick and outputting button presses as I turn the encoder. I'm finding that I need to turn the encoder within a fairly narrow rate band when using it as a GPS knob. If I go too fast the "button release" pulse isn't detected. I've tried various settings in AAO, like the repeat on hold options, but there was never a good setting that would give me a single increment at a time when turning slowly and multiple increments when turning rapidly. My question today is if the X-Touch mini enc…

Hey everyone Im trying to get the baro to work on my mcp but i can only get the STD button to work and not the increase and decrease to work can anyone help. ? all i seem to get is EFIS_CPT_BARO, EFIS_CPT_BARO_IN_HPA, EFIS_CPT_BARO_STD, no increase or dcrease options..

Hi Group, requesting your help, (my coding skills are limited). For the FlyingIron F6F, I'd like to map the Oil Cooler Shutter to my Hotas. Currently, I'm able to map controls for full open and full close via this: OIL_COOLING_FLAPS_DOWN (button 12) on my WH Throttle HOTAS OIL_COOLING_FLAPS_UP (button 10) on my WH Throttle HOTAS But Ideally, I'd like to have the Oil Shutter Control go through any percentage setting, from 0 - 100%. (Which I'm able to click on the cockpit lever and vary the percentage by sliding it). Here are the variables associated with the Oil Cooler Shutters, (they're not in the LVAR section). OIL_COOLING_FLAPS_DOWN: Par…