AxisAndOhs Support

I'm using Guenseli's scripts for the Leo MD80: https://flightsim.to/file/31930/fly-the-maddog-streamdeck-xl-profile-alpha Lately, I'm seeing an issue where some assignments randomly stop working on my Bravo, e.g. the fuel cutoff levers and A/P mode buttons. I downloaded the latest version of AAO but that didn't do the trick. I'm not sure where to begin how to troubleshoot this... any suggestions?

I am using a TEXT button on Streamdeck to display the distance to TOD on the PMDG B737. I have a script that reads the PMDG variable and writes it to an AAO local (PMDG:FMC_DistanceToTOD)·(>L:MyTOD) . I call the variable in Streamdeck with S:(L:MyTOD). As written, the variable only updates when I use the TEST button in the script editor....I know I'm missing something basic here, but how do I update this read everytime the variable changes? Thanks, Mike SOLVED: Needed to use Autoscript (right above SUBMIT button)

Hi Oliver, I searched Views and found 'Toggle Chaseplane' which is what I'm looking for. Assigned it to a button on my yoke and no luck. I do get a green light on/off when pressing the button though. I'm assuming here that that Toggle Chaseplane=Spot but not sure. Any ideas? Thanks, Mark

In the Longitude (Primary but all with 2 radios), I'm looking for something (key stroke, variable, ....) to put on my Stream deck, that will toggle the "Active" radio between Com 1 to Com 2. thanks

AAO: 3.20b43 - run as Administrator Latest FMC download (zzz-lorbysi-aao-b787fmc) in Community folder My WebAPI port is 9091 - Streamdeck, fippanel, knobster all working When I enter: http://192.168.1.168:9091/webapi/b787fmc/index.htm I just get a refuse to connect error (ERR_CONNECTION_REFUSED).

Whenever mapping keyboard shortcuts with AAO, I cannot get Stream Deck to work with those shortcuts. Both Apps are running in Admin mode but, let's say, if I bind Ctrl+Alt+1 to flip the battery on AAO, setting a button on SD to the same combo does not work. Pressing the key combo works and, of course, connectivity between AAO and SD is also fine. What am I doing wrong? Thanks

Is it possible to revert to an earlier streamdeck plugin version? I updated from plugin com.lorbysi.aao.streamdeckplugin_20_02 to com.lorbysi.aao.streamdeckplugin_23_02 on StreamDeck version 6.3.0.18948 and AAO version 3.30 b43. All of the Multiguages, Slidergages, Textguages and knobs immediately went blank with the new plugin version. The code is still there but only a blank light gray button now displays. All was working perfectly prior to changing plugin versions. I'm using the Guenseli H145 StreamDeck XL and PLUS version 1.5 Profiles from Flightsim.to. The broken buttons are also occurring with other profiles using the aforementioned gauges.

Hi Oliver- As the title suggests, is this possible? I see where there is Throttle 1,2,3 and four listed is the axis window, but not a plain 'Throttle Axis'. Thanks, Mark

Another one of these items that had been working previously. Midi devices enabled is ticked. See attachment. Again, many thanks in advance Alastair McIntyre http://

Hello @ll, A while ago I was asked if it would be possible to display a text box in the running simulator. Turns out that you can, when you activate the AAO InGamePanel (it just has to have a white border in the MSFS menu bar, it doesn't have to be open) This RPN script will display "HELLO THERE" and remove the text after 5 seconds: 'SHOW_TOOLTIP|0|hello·there|1000|500'·(>L:AAO_COHERENT_TRIGGER,·String)· (SPLIT:5000)· 'HIDE_TOOLTIP|0'·(>L:AAO_COHERENT_TRIGGER,·String) 1000|500 are the coordinates where the text box will show up. There is another variant of this Coherent trigger that uses an additional parameter (maximum width of the box), but a…

Thanks for the application - really changes the game! I have been working on the Blackbird Corsair, specifically on the Supercharger handle. I'd like to map an axis on my Honeycomb Bravo to the handle. The handle has a Lvar (L:FG1D021) for position, but that, while settable, is not actually controlling the supercharger application, and is intended for output animation only. I figured out that control is done via two events sent through the EVENTS_ID, and implemented a dirt simple script bound for the moment to a up/down toggle switch on the Honeycomb (the permanent "flap" switch over on the far right - NOT the axis at the far right). The scripts are rather simply…

Hi I am running the full version of AAO Up until now AAO has been working without any problems. Everything is ok until I attempt to add a new assignment, the popup window appears, however my mouse and keyboard will then freeze up and I am unable to proceed any further. MFS will still continue to run, and the controls are still operatable, however I am unable to cancel the pop up window and proceed any further. This is the contents of the LAAO_log_20230625114848.txt file on startup. "25/06/2023 11:50:35.19 : Exception received: 3 from send id 50 errloc 50" I don't know if is of any relevance or not. The startup log appears (to me) …

Hello @ll, the Web FMCs/CDUs on the AxisAndOhs.com website have been updated for AAU2. All the web pages now have keyboard control (LSKs, function keys and the keypads can be accessed with keyboard combos) and they use a new AAO Javascript API with (hopefully) higher performance. The following FMC/CDU modules are available as free Downloads: Default Asobo A320 Default Asobo B747 Salty Mod 747 Default Asobo B787 Default CJ4 FlyByWire A320 Aerosoft CRJ FSS Embraer E170/E175 DC Designs Concorde JustFlight 146 Leonardo MadDog PMDG 737 PMDG 747 (FSX/P3D) Some of the packages have change…

Hi folks. I am a brand new user of Axis and Ohs. I have started reading the documentation but haven't gotten that far yet. This morning I was playing around with trying to start allocating the axis and buttons on my new Pro Flight Trainer Puma X helicopter controller. When I opened the dialogue for a new axis and went to device, I only saw keyboard, mouse, and voice. I did not see the PUMA. Am I doing something wrong? How do I get the application to see that device? If it doesn't work with the Puma I will not be able to use it at all. Thanks...... Rob

I just downloaded the trial version to see if it works with my hardware, had no problem recognising the Saitek yoke & rudder pedals, but when I enable Saitek panels in hardware menu, my multi-panel lights up, and appears to have default functionality, but the "ignore sim elec power" and "Saitek panel config" options are greyed out, so I can't change anything. Is there something else I need to do?

I bought this software to try to rework some of the functions on the Saitek Multipanel. Basically make the flaps switch the autopilot disconnect and have the trim wheel adjust VS up or down. The flaps switch trick was pretty easy and helped me learn my way around events but the trim wheel has me banging my head . I've spent the last 3 evenings wasting hours trying to get this to work but no luck. I have also noticed that no values show up on the multipanel screen and the buttons do not light up. I used to get values and light up buttons with the Saitek MFSFS 2020 plugin. That said, the values never matched what was on the 737 MCP and Ive spent hours looking for a so…

New to AAO but I have watched most of the YT videos and read the manual. I installed the ATR Profile from flightsim.to but I can't get it to work. It works for other users so it's not likely a problem with the profile itself or AAO. It does require the InGame panel to be active and that leads to my question. The InGame panel appears to be working, that is the window pops up when I select it from the toolbar. Its red if AAO is not running and gray if it is running but there is no data in the window. How do I know if it is actually working? Thanks... Richard

For some reason, the A&O detent input box is no longer responsive. When using an axis for flaps, double clicking on the detent number input box has no effect. The default number is either 363 or 143(the box hides the 3 digits,so they are hard to read). I am using the new updated ATR as well as the Transall c-160, both of which appear to have the same anomaly.

Disregard

I have been playing with displaying text on the sim with a checklist. This code has been tested with default Asobo Cessna 172 Skyhawk. This will display "set landing lights on" on the SIM screen plus with audio. Wait until the landing lights are on Say "landing lights are on" and clear the text box. Load default Asobo Cessna 172 Skyhawk and make sure landing lights are off Create a file in ..\Documents\LorbyAxisAndOhs Files\Scripts with extension .txt Scripting -> Run Script Files -> Select the file created above Tick "run selected as Checklist" Click "Run" Switch on the Landing Lights 'SHOW_TOOLTIP|0|set landing lights o…

I'm a newbie to AnO. I recently started using a Stream deck Plus for my MSFS2020. I have the Stream deck plugin and many profiles for the AnO for the sim. I'm connected to sim but when I go to Watch sim Events - no matter what I press, I don't get anything in the AnO window. I'm sure it's something I'm doing wrong and just need to be aimed at a setting to change. Thanks Ron

I have always found AAO to be essential to my enjoyment of MSFS. I can't imagine flying without it. My question: I have an addon [Blackbird FG-1d Corsair] in which several essential commands, e.g. Tail Hook, are not mappable to keyboard or any button or axis. According to the developer, they are only operable by using the mouse. Is it possible using AAO to convert mouse movements and clicks to events that are mappable to a joystick?

I am using a throttle quadrant that employs an 8 turn potentiometer for fine movement. Unfortunately, the very slow movement of the axis cursor does not trigger an axis detection in Axis and Oh's. Is there a method for manually entering the specific axis in A&O? Thank you.

I cannot get the WEBFIPs to show on my tablet. Does MSFS have to be running? I assume not as the gauges show in the local browser in offline mode. 1. I have configured a set of gauges and they show fine in a local browser and the in-game panel. 2. Gauges - WEB FIPS is ticked. 2. In windows firewall I have allowed the program "C:\Program Files\LorbyAxisAndOhs_MSFS\LorbyAxisAndOhs_MSFS.exe". 3. I run the app as administrator. 4. In windows firewall I have configured inbound and outbound rules for the app for ports 43280, 43380 and 43381 (I reset the ports after the recent update). 5. I have done the same on my router just in case it…

I have recently come to the conclusion that to operate the planes I enjoy flying in the way I want to, I will need to try out MSFS external programs to operate my peripherals. So here I am, dipping my toe into Axis and Ohs. I have done a few weeks of research and I do believe I understand the basics of how and why things are the way they are but I have also reached my limit of understanding, even after watching or reading the resources regarding Axis and Ohs. In other words, I need help. I would like to ask for help based on a simple example in the CJ4: My intent is to use Axis and Ohs „on top of“ the standart MSFS keybinding profile. What I me…