AxisAndOhs Support

Hi, I am trying to assign the GTSNXi Direct-to button to my joystick using AAO. The manual from TDS states the following: On AAO, I have tried the following without success: I know this is trivial stuff, but could someone let me know what I am doing wrong? Thanks!

I am trying to set up the Web API for the FMC. AAO 4.51b09 MSFS 2020 PMDG 777f What I have done: 1. copied the folder: pmdg777fmc” into the folder \Documents\LorbyAxisAndOhs Files\WebPages\ 2: Adjusted the file 777_Options.ini. I am sure that I have done it correctly, then with another application the FMC runs without problems on another computer. https://flightsim.to/file/77669/pmdg-77w-cdu 3: Added the two scripts as Aircraft automated scripts to the template. “PMDG-PMDG_777_CDU” one shot “PMDG-PMDG_777_Data” repeating Since it does not work, I looked at the scripts and both have the same text: (PMDG:reserved[0]) Is that correct???? 4: Host firewa…

Hi there, Is there a way to temporarily disable an assigned axis, button, etc that is assigned in AAO? I don't want to delete the assignment...just turn off the button or axis as needed for different scenarios. Thanks!

Hi Everyone, New here and very new to stream deck, I have spent a few days playing around with it using AAO and have managed to work out quite a lot so far however one thing seems to be causing me quite the headache. Adjusting the glareshield lighting!! I want to have 2 buttons for this - one to increase the lighting by 10% and one to decrease by 10% - I know I also need to put limits in to stop it going over 100% and definitely to stop it going below 0% so I found a video on YouTube by Keith Butcher that has been very helpful with almost everything I've learnt this week with the exception of the glareshield. In the Video he writes scripts for poten…

I am trying to add a button assignment in AAO (latest version and msfs2020). Under the device choices I currently have any, keyboard, mouse, and voice as choices. Under hardware changes the stream deck xl appears in the connected devices list. How can I get the stream deck to appear under the device drop down list when trying to make button assignments?

Not all of my controllers are picked up by MSFS Axis and Ohs. I can see them all in MSFS 2020, Windows, MSFS 2024, and Axis and Ohs 2024. Not sure how to fix this. Thank You

Hi, I have a new problem. Once AAO running nothing works with the sim. I need to go through tools/configure webapi port/set local ip then restart AAO then all works. The setting doesn't save. What can I do to save this option and not run it each time ? Thanks.

Hello, firstly thank you for AAO for TBM MSFS24! I bought official version of program, installed TBM profile to my streamdeck XL, everything good but some minor buttons did not respond: 1/ taxi lights + landing lights 2/ pulse light 3/ cabin light 4/ bleed 5/ windshield ice 6/ generators I made few reinstalls, everything is OK for me + for plugin developer. do you have any idea how to fix it? Thank you very much! Best regards, Jan

Having trouble getting Guenseli's A300 and Fenix profiles for MSFS2024 to work. I confirmed that I'm on the correct versions of software: StreamDeck 6.7.3; Axis&Oh's 4.51 and the StreamDeck Plugin 38.01. Values from the sim are being read correctly and displayed in StreamDeck (ex: Altitude 10,000 or toggle lights on and off) but I cannot update the sim using the StreamDeck console. 2024 and 2020 use the same StreamDeck profiles but Axis&Oh's uses a unique version for each simulator. Everything works in 2020 but 2024 StreamDeck cannot update the sim. I assume there is something in MSFS 2024 that is blocking the update but I can't figure out what. Any…

This pulls the spd button (>IE:INSTRUMENT_FCU_SPD_PULL) The problem is that it stays pulled and does not go back to the "neutral" position. I have tried a number of things but to no avail. Any ideas? It seems that when using the mouse, the pull happens on the down click and the release to neutral on the mouse release. If that helps.

Hello everyone. I just updated My AxisandOhs to the current version. I was at work earlier and was browsing for a way to discover what variable was at play when a switch in sim was thrown. AS an example, if I was in the Baron 58, and wanted to turn on the Pitot heater, how would I discover that variable would trigger the pitot heater to turn on? I had found a thread on it while at work, but for the life of Me, I cannot find that thread. I realize that the pitot heat is a very common FS variable and works well in normal bindings. I am using it as an example. How would I go about discovering that variable if I were to mouse over it a…

I have the following script for the speed bug on the FSS-727. It works but is slow. I have attempted to add rolls with a fast turn but that does not seem to work. This would be more helpful with the HDG bug and course script which are similar. What say the smarter folks here. This seems to increment in single steps, I would like the fast turn to do 5-10 steps. I don't think I have tried adding more "+" to the script and thought I would check here before going down a rabbit hole. (L:FSS_B727_CP_AIRSPEED_KNOB, Number)(L:FSS_B727_CP_AIRSPEED_KNOB, Number) ++ (>L:FSS_B727_CP_AIRSPEED_KNOB, Number)

I am trying to set up a couple of Streamdeck buttons for the analog clock on the PMDG 777. I have downloaded three simple scripts that interact with the clock. If I run these scripts from the AAO script editor all is fine. The controls on the clock work as expected, However, if I copy either the script name (MISC_CLOCK_START_STOP_TOGGLE) or the actual script ( 17101·(>K:ROTOR_BRAKE) ) to the event in the screendeck button nothing happens with the button push. And yes, I submit the Streamdeck changes. The action does not appear in Watch Actions from the streamdeck button test, but it does appear when I test directly from the AAO script editor. AAO is version …

Would it be possible to add change text definition sequence with “Layer Up/Down” buttons as is done in "Image Definitions"? for the MultiGauge in the Stream Deck plugin?

I miss something! The Connection Status button is missing in the new SD 38.01 plugin. Has anyone found it or can give me a clue? Thanks, and happy xmas

Hi, Is there any cahnce making webcdu for the Asobo ATR as well ? Thx.

Hi, Since the latest Stream Deck plugin update 38.01 the G1000 'PFD Opt' page does not permanently switch to the PFD options - the labels on the Stream Deck buttons continuously flash between the PFD options page labels and the main page labels. The labels in the sim itself are fine. Regards, Daz

Hi 🙂 I used the Font "7 Segments" in my new Desktop FIP, but found out that it wouldnt work in the WebFIP. In my screenshot the Desktop FIP is on the left. Text well formatted and in the right font (its a screenshot from the editor window, but it works in normal operation too). On the right is the WebFIP - opened in Firefox, but looks the same in the ingame AAO Panel. The font in the LDG ROLL Window is way smaller and uses the default font face. Gauge Sizes are all the same 512x512 in all cases. Did I miss something regarding fonts in WebFIPs? Thanks for clarification 🙂 Cheers J

Hi I got an X-Touch Mini to use with MSFS and got it to work, and I'm even managing to get some basic scripting to work. I decided to get a second X-Touch to expand my options, and then more out of interest, I got one of these devices summina MIDI Controlle Mixing Console with 43 Buttons 8 Knobs 8 Push Buttons BT Connection Battery/Type-C Power Supply USB MIDI Controller Mixer for Most Electroacoustic Instruments : Amazon.co.uk: Musical Instruments & DJ to see if it would also work. It does but the knobs need changing from "CC" to "CW" to make them continuous. Once I added the third device, the X-Touch Minis stopped working, I think beca…

Hello, please, how can I achieve selection between various combos with specific keys? I have custom keyboard, with 3 buttons on top and many beneath them, I use these 3 top buttons to change what rest of buttons do. Currently, all bottom buttons have assigned 3 assignments for each top button (with top button as Combo, (is toogle checked)). However this is not ideal, because when I need to switch between top buttons I firstly need to deactivate one that is currently toggled on and then activate desired one. If I can't recall which of the top buttons is toggled on, or I miss-click it ends in multiple combos turned on -> undesired multiple assignemnts for one b…

Few things seem to have changed, I created my MSFS '20 profile based on this one (changed graphics and I didn't use all of it since I have a hardware G1000 set): StreamDeck XL Profile for Cessna C-172 G1000 Version for Microsoft Flight Simulator | MSFS These are the controls I haven't gotten working, it seems you need to use IE: variables instead of using the toggle KVars for some of these but I have no idea how to do that in AAO: Fuel pump (writing to kvar ELECT_FUEL_PUMP1_SET still seems to work but the a: variable that I used to read its state (GENERAL ENG FUEL PUMP SWITCH:1) no longer works Master alternator (IE:ELECTRICAL_ALTERNATOR_1) …

Would it be possible to see at least which layer is active in the AAO ingame panel?

Hi, I'm trying the demo to see if my Knobster could get benefit of AAO functions. It seems that I can't manage long / short click from Knobster push button. Is it something that is on your todo list, or a limitation of the Web bridge or Knobster API? Long / short click handling is a major enhancement for me, so useful in Airbus series to simulate Push/Pull on the FCU. Thanks

Hello, I would like to use th Text Gauge for StreamDeck using the AAO StreamDeck plugin. I can find the variable for zulu time but it is in seconds. What would I need to do to show whateve the current sim time is? Thanks

I can manage to deploy the spoiler but nothing I know how to do will make it retract. It also seems to be an all or nothing thing, not a true axis. Any ideas? Supposedly this works in FSUIPC, however I am apparently too dumb to format it correctly into AAO. This is what gives the handle full deployment but does not stow when I move the handle back up. Using HC Bravo. B727 Spoiler Axis#$Param 16384 + 327.68 / 0 max 100 min (>L:FSS_B727_SPOILER_LEVER_STATE, Number)