Dassault Falcon 50

I am really liking the updates that are happening with the Falcon 50. Each time I see an update in my inbox, I can't wait to download it and see what has been improved. Great work. I have a question about the climb speed and I am sure that I am doing doing something wrong. On take off, once I am gear up and stable, when I turn on AP, I typically dial in a VS of about 1500 FPM by doing the following: Dial in Altitude (let's say FL120 for the sake of this example), press ALT SEL, then VS, then dial in +1500. The plane begins the climb. I usually bring the throttles back at this point to maybe 80% N1 and let the plane climb. However, the plane slowly begins to…

Hi Guys Just installed the 1.7B version and it is a blast. The only side effect is the attitude alert that is not so clear in my configuration. Thanks,David

Version 1.7A of the FSW Falcon 50 is now available for download and beta testing from the Flysimware store. Please comment and report any possible bugs or issues found during beta testing IN THIS THREAD. This will help speed up release of the final version if any changes are needed. We anticipate releasing Falcon50 v1.7A to all stores in about 1 day. VERSION 1.7 and 1.7A UPDATES: 2/13/2019 New Features: Major texture update. New specular maps throughout the interior and exterior. P3D V4 now includes full PBR textures for the exterior model. Re-modeled the virtual cockpit ceiling, pilot window, cabin window shades, wall…

Greetings, is there any chance we might get an hPa readout on the primary altimeters or maybe even the electronic one we have seen in the Learjet in the past for the Falcon? At the moment I have to use the standby altimeter to convert the values from hPa to Inches. Talking about the altimeter, any chance you could split the primary and standby altimeters so that we have to set their subscale seperately? Thank you in advance for your answers!

Falcon 50 Version 1.7B sent to all stores. Allow 1 week for most stores. Simmarket and maybe a few others will update this week. Our store is ready to download. V1.7A to V1.7B basically we fixed the 32 bit so it has interior shadows. VERSION 1.7B UPDATES: 2/18/2019 New Features: Major texture update. New specular maps throughout the interior and exterior. P3D V4 now includes full PBR textures for the exterior model. Re-modeled the virtual cockpit ceiling, pilot window, cabin window shades, walls and all window panes for more details and accuracy. New pillows and seatbelts added to the cabin couch. Improved seatbelt modeling …

Share or create a Falcon review using this link here from our store so others can get news on this amazing product! Log in to get the review link. Sharing needs no log in. https://www.flysimware.com/FLYSTORE_2015/en/home/40-flysimware-s-falcon-50.html

The Falcon is really nice. I have an issue which I hope someone can point out what I'm doing wrong here. When I select the 'All Systems Off' and proceed with a startup, the N2 gauges don't move. Also, the 'FUELING' light remains lit. However, selecting 'Ready to Start' and these issues don't occur. One final thing: on the overhead, how do you know if a switch is on or off? There's no indication on some and no tooltip either. Thanks for reading.

GREETINGS - Just purchased the FALCON 50 and would really welcome a chance to work with a TUTORIAL. Does it exist? Is there a Video Tutorial? I'd be happy w/just step-step written. Thanks MARK

Hi, Apologies if this has been covered before. For those of you who are using your Falcon 50s with the RXP GTN 750s, I could greatly use some suggestions. I can't for the life of me get the aircraft to intercept the localizer course, and I'm pulling my hair out. I've tried several combinations of procedures to try and figure it out, but none have worked. In each situation the aircraft will fly past the localizer course, or sluggishly turn as if to intercept it and then fly right past it again. I also have the Flysimware Lear, and have also equipped it with dual RXP GTN 750s. I did some tests with it as well, on more than one ILS approac…

What am I doing wrong?

Hello everybody. I just purchased the Flysimware DA50 and I've a problem with cockpit sounds: they are not playing except the belts7smoke signe and the electrical buzz after swith on the batteries. The rest of sounds are gone: clicks, APU, trim... I tried to move the FBGS_XMLSound.dll to the panel folder, change the panel.cfg syntax to ressemble the syntax in the Flysim Lear 35, but no effect. I also tried to use the MT_XMLSound.gau from the Lear 35 (v2.7) and then I got an invalid license message and some artifacts in cockpit view, so I reinstalled the Falcon only to find out that the sounds are still gone. I'm using Falcon 50 v1.4 (last version available …

hi, i have a problem with my falcon 50 when launch the flight my sim freeze and return to desktop and some time the whindshield go black and the sim freeze and CTD grrrr i bought yesterday how i can fix that thanks for help

What method can be used to change the size of the GTN 750 pop ups ?. They are too large for my preference and having to manually change them each flight is kind of a hassle. Thanks so much for a great aircraft !

Hi, Im having an intermittent problem wherein the autopilot modes do not light up. Because of this, I don't know if a mode is engaged or not. The autopilot itself is working because it moves the flight director. Its just that I have no indication if it is light up. I did not have this problem with prior earlier versions and it only happens at some flights.

I think the landing light is a bmp "splash" - but I could be wrong. In any case- it doesn't seem to illuminate anything, but rather white-blind-out what is in front of the aircraft. The effect is that it doesn't allow me to view taxi or turnoff lines. I'm wondering if it could be my shader set, or is this something other people have experienced?

Not a big deal but I would love to have an associated sound for the wipers. Pascal / P3Dv3

Hello All, I would first like to congratulate the Flysimware team on an amazing aircraft but I have a couple of questions that I could not find in the manual. 1. The autopilot, I have had major difficulties with the IAS mode tracking a speed and how to set a speed on it so I was wondering how to do that. I have also had some issues with the ILS tracking the localizer which it seems like it has a hard time doing. 2. I could not find the APU for the life of me so where is it in the cockpit. 3. I have no N2 rising on engine start off of the GPU but rather the N1 rising. Is this normal behavior? 4. Can I put a number for fuel into the manager …

You know how I love this aircraft as much as I like management things simple. So would it be possible to merge the gross weight counter set button (in the payload manager) + its activation in the aircraft (mouse center wheel button) and to activate them just when the beacon light is switched on ? When we do so the payload is supposed to be done and the door closed, so.... Anticol in RED ans that's set. I admit that often I forgot one of them or both.... What do you think? Pascal

... has just been released to all stores. Note this update does not include new textures since they are still a work in progress. Al

Hi Here is mine if you would be interested to program your Saitek swtich panel / Saitek autopilot / Warthog throttle for instance just copy and paste in your actions.lua file and feel free to adapt ************************************************ -- FA50 from FLYSIMWARE -- -- LINDA Action file from Pascal Paillart/Cool -- -- version 1.0 January 18th 2019 -- -- ## System functions ## function InitVars () OnGround = ipc.readUW("0366") -- plane on ground? ipc.sleep(3000) if OnGround == 1 then --Airplane parked, no pilots ipc.writeLvar("CABIN_DOOR1",1) ipc.writeLvar("pilotswitch",1) ipc.writ…

Set up the reverser axis in the prepar3d controls for engine no2 ( also tried it in FSuipc5 ) but it doesn't appear to be having the affect of slowing down the airplane when engaged, the power setting is about 78, sure it was better than this in earlier versions. using F2 gets the power on quicker but this of course is for all three engines but I understand the f50 only engine 2 that is the reverse. . bob

Hi all: Running FSX, Falcon 1.5. Flashing is much better now but unfortunately still with us. Seems to correlate to low altitude maneuvering in terminal area with dense scenery. Only when looking out straight ahead. Not seen on looking to either side. Not seen at altitude even with dense REX clouds at 1024. Very annoying though. Tough to see the runway. 🙂 Rick

Hi all: This is almost like a trivia question but I would appreciate some help on this. I spend time trying to get the three engines at the same N1 on takeoff and in cruise. Actually during takeoff, absent anyone in the right seat, there is not a lot of time available to worry about the synch so I just do my best on a quick look at the gauges. I try for 1 and 3 and don't worry about the centerline engine. But at cruise I start out with them each a bit different N1 and fiddle with the throttles until they are close. But then I have noticed that as time passes, the N1s seem to creep together. Is there a FADEC sort of algorithm running in the background which tends to e…

VERSION 1.5 UPDATES: 1 / 8 / 2019 New Features Landing/Taxi light now shows 5ft AGL for exterior model and 100ft AGL for interior model for improved visibility during approach and prevents the exterior model from showing a light floating in the sky. Bugs & Updates Missing ITT text on the engine temperature gauges added. TCAS off will now prevent code from being updated constantly giving about 10 FPS more for better performance. Turning on TCAS will still have overall better FPS as we moved some code from the interior model to exterior logic. =============================================================================== Please test…

Has anyone done a start up tutorial, or wants to make one...I got as far as starting the APU :(... Please guys, be gentle :) Thanks so much, Bob