RXP GNS 530W/430W V2

I cannot seem to place the RealityXP GNS 530 into the panel of the 172 REP where there is a 2 panel display of the GNS430 and GNS 530. I was successful in placing the RealityXP GNS430 into the 172 panel, but the coordinates for the Garmin 530 (when looking at the 3D-cockpit folder in XPlane) are not correct and I have no idea how to get that RealityXP GNS530 into the panel of this plane. I read the manual provided for the XP GNS V2 and successfully got the Reality XP GNS 530 into the Baron panel and also was successful with the AirFoillabs 172. But can't seem to load both GNS 530 and 430s together into this C-172 where there are both GPSs. Any ideas? I tried differen…

Hello everyone, I have ran into some issues with the amazing GNS530 package. I have tried to install the 530 into the panel from the config in the pinned thread but have not been able to be successful. I have linked my config below and look forward to seeing the GNS in the PC12! [GNS] ; comma separated list of gauges gauges = GNS_530_1 [GNS_530_1.PANELS] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 1492,883,516,378 ; screen only border s…

how do i remove the bezzel to use it on my realsim gear gns530

Hi, i bought garmin 430 last year and i was i bit desapointed when i realised that there are not arrival procedure (STAR) at Quebec airport. CYQB is my main airport for practicing and i wish to have an update data for this airport. I had updated my old version of garmin via the garmin trainer but i don't know how to proceed with this new version. Ps. the star exist since 2014 at CYQB and the new version are not been updated ! for fifty box !!!

Hello, I just bought the GNS 530 last week. Installation went fine, I use FSX-SE, I installed the unit into the A2A C172, and it seems to work like its supposed to except for one thing, I fly out of KBNA quite often, so right off the bat I noticed that when I create a flight plan, I go to proc. and choose to pick a departure, but there are absolutely no departures listed, if im flying into KBNA I can choose arrivals or approaches just fine, but flying out of KBNA there are no departures. So a I doing something wrong? I've searched and read and can't find any answers. Maybe someone could confirm that there are no departures for KBNA? Thanks

I recently bought the 430W and installed it, and it is causing a stutter in XP11. The stutter is at a fixed interval of about 1 second. I have tried it with 11.41 and with the most recent 11.50 beta. Doesn't matter if Vulcan is running or not. Graphics settings have no affect (still does it with lowest settings). Anyone else have this issue? i9-9900 with RTX 2080, 32 GB RAM Thanks,Eric

Hi all, I´m presently struggling with my setting of 2 GNS430 (Reality XP). Everything is looking fine, even the crossfill does work perfect. But when I´m flying on autopilot (in my case it´s an GFC500 from realSimGear, but I also tested this with others with the same result) with at least one course change, the autopilot will initiate the turn correctly. But then it seems, as if the GNS430 takes to long to activate the next leg (it takes some seconds till it turns magenta). During this seconds, the autopilot loses it´s navigation device, the turn is stopped an the autopilot will switch off. Your certainly can reactivate the autopilot pressing the nav button, but du…

I desire to purchase the GNS 430 W to use in the Airfoillabs Cessna 172P for X-Plane 11. I've managed to get so far as getting the installer to execute (having had to disable various virus protections and firewalls etc) but now it's loaded I can't proceed with the purchase as the button is greyed out (see below) although I did manage to apply a discount coupon. . Please advise.

For the life of me i cant get the 3d panel to work. I have a popout working on another display, but it cant get it goin in the 3d cockpit. Is this a known issue?

i I just bought today the GNS430 for Xplane 11. The GPS appears on the cockpit view but I cannot turn it on. I cannot find any help on the troubleshooting section in the Reality XP manual.

I just purchased and installed the GNS 530w . I enabled the plug-in and followed instructions to add it to the cessna 172. When I press enter at the self check screen, Xplane freezes. I have tried rebooting and restarting X-plane and it happens every time. Any thoughts on troubleshooting?

I just bought the GNS530 W XP Reality, but when starting XPLANE11 and opening flight with the Baron, I cannot find the plugin, there is no plugin. I donwnloaded everything in normal way and in proposed folders. Thanks for your help. Rgds Stefan

Is there any way at all to implement the RXP GNS 530W into the Carenado baron in the 3d cockpit? I tried figuring it out through the Default baron tutorial but it left me nowhere. How can I physically replace the two Default GNS 430s in the virtual cockpit for one GNS 530? Much appreciated

Hi When I try to run Reality XP Garmin GNS, I receive an error message indicating that the file GNS 400W/500WSeriesTrainerLite_330.zip is not found (404). Can you help me. Thanks

I bought the GNS 530 yesterday. All loaded as per application - no path changes made. Plugin shows up in X-Plane but only roads and terrain showing up. No databse data at all, so not accepting flight plans which show up as option to load in the 530. C:\Program Files(x86)\Garmin\GNS Trainer\GNS\db is the path to db folder. db folder contains files BMAP.BIN, terrain.adb, terrain.odb, TERRAIN.TDB, worldwide.bin. What am I doing wrong or what is the matter?

Hello, is the 64bits issue resolve to connect the PFD driver with XPLANE 11? Thanks

Hi everyone, It is a possible way to update the GNS 530 database to current? because the one that I have is from 2009.

Hello, so that means it's possible to get a refund? I would like to take this option after spending the whole day on several forums to find a legal and affordable way to update the GNS database at least to a state that allows me to fly online. I bought the GNS 430/530 for X-Plane this morning and despite that it's a great product esp. when it comes to integration into existing aircraft add-ons and of course it's great if you want to have it for training for the real thing, it's quite useless for someone who likes to use it mainly for flying on online networks with it's 10 years old database. I would suggest, to make it more clear on the website, that it com…

I signed up for the auto update notifications last month. I received a message when first turning my computer on yesterday, 1/14/2020, of the new GNS2 v.2.4.17.0. I clicked on it to install and it saved it, so I thought I was good to go. I turned on my computer today and the same message appeared about the same update. I clicked on it again, paying a little closer attention to where it was going, as saw that it is saving it to my documents folder. I'm assuming this is not where it should be to work properly. I went back to reality-xp.com/support/updates to read some more. I set up the RSS feed on my Internet Explorer Browser. I downloaded the update again through …

Hi All, I have two independent XPlane 11 flight simulators, one machine running Windows 10 with XP11 and one running Windows 7 with XP11. They are not networked, they are totally stand alone. One I use for a glass cockpit, the other for an analogue cockpit. I have bought the Realsimgear 430 and upon loading RealityXP for X-plane under Windows 10 everything works perfectly. No problem. On loading RealityXP onto XP11 on the machine running Windows 7 everything loads up as it should, the 430 screen beautifully superimposed on the Realsimgear 430 hardware, but the buttons on the Realsimgear 430 do not talk to RealityXP program at all. They remain inactive. There is no communi…

Hi Just bought both the 430 v2 and the 530 v2. Is there some kind of official collection of .INI files to download somewhere? br Lars

Hey RXP, I purchased the software for the GNS530 over a year ago and it has been excellent. Just recently however I have noticed an issue with the 530 sending information to an HSI. The problem exists when flying the published hold from a missed approach. When arriving at the holding fix the first time, the 530 DTK sequences to the proper course but the HSI does not follow suit with automatic slewing. In any other circumstance, and to my recollection in every circumstance over the last year, the 530 sequences and the HSI auto-slews the course. Now however, when I fly to the holding fix, the HSI course pointer just maintains the present course. Strangely…

I've searched with Google and on the forums, but couldn't find a concrete answer. Is it possible to run the simulator on one computer (a Mac in this case) and run the RXP GNS430 on a remote (Windows) computer connected with ethernet?

Included with the aircraft is already a configuration file for the GTN 750. I'm trying to add down instead of the regular 530 panel from X-plane, the panel from RXP GNS530. But nothing happens. tried to use the config laid out here. But it doesn't change anything either. Can anyone help?

All, Environment: Windows, XP-11.41, Nvidia - Desktop GTX 1080, GNS 530, HTC Vive VR running under STEAM w/ Saitek flightstick as controller. With VR NOT running, placing the GNS 530 and sizing it works well in both 2D and 3D cockpits. But with VR Steam enabled, with the .ini specifying the position and size of the GNS_530_1, the GNS530 appears but it is following my eye, not sticking to the panel. Its focal distance is also much closer to my eye than the panel is. I have looked at others .ini's but don't see which parameter(s) are involved in gluing the GNS 530 to the panel. I have tried all combinations of freeze, hide, reset, popup & stack (and t…