Little Navmap | Little Navconnect | Little Logbook Support Forum

Hi Can you help me with this. Had to reinstall UTL in my sim P3dv4.4. Whilst at a gate in Glasgow I noted 2 A320 Airbus aircraft in Thomas Cook livery. As this is defunct airline, I went into the UTL aircraft Library and changed the liveries to British Airways and deleted the Kestrel entries. Turned off and on the UTL traffic and both planes now showed as BAW. However I noted that LNM still showed the call signs of Kestrel and same tail numbers. I then went to the library in LNM and reloaded the scenery library and when finished the planes still showed up as Kestrel. How does LNM read the data for AI planes or do I need to do something else to re…

Hi, Is it possible to have the Little Nav Map to automatically rotate the map to show either north up or course up? Regards Chris

Hello, after some time i am back at MSFS and installed a new airport (Hamburg EDDH by sim wings). After that i updated the scenery library in LNM. I noticed then, that the gate/park position numbers in LNM are all wrong for this airport (i am not sure if they were wrong before, i didnt pay attention). They are correct in the sim itself (worldmap), i compared it with charts from vatsim and photographs. Do i miss something? Thanks for help!

Does anyone happen to have a profile for this amazing plane that they could please share?

I cant seem to be able to scroll the map while in VR, but only zoom. I cant unlock the aircraft view. I believe I have all the settings set properly. Does this not work? I can scroll it in the main map outside of VR.

Would it be possible to use LNM to monitor my flight's progress from another computer that's on the same LAN network? I have a macbook with LNM installed and would like to use it to plan my flights and also monitor my flight (use it as a moving map). But my main flight sim is on my PC. I am using MSFS by the way. If it's possible, are there any tutorials or videos that demonstrate how to set this up and get it working?

I am running the latest version of Little NavMap and I export flight plans for multiple simulators and aircraft. With the last few updates the export names for FSX and P3D changed. Before when exporting for FSX and P3D it would use the format in this example, IFR Denver Intl (KDEN) to Albuquerque International Sunport (KABQ).pln. But now it exports to KDEN Denver Intl.pln. Is there a setting somewhere that I have missed that will change the export name format back to what it was, or at least include the departure and destination airport in the name? All other exports include the departure and destination airports. All except the export for FSX, P3D and now FS2020.

... as the title says. My user a/c is shown correctly. AI a/c symbol is active. Tried also some display resets. Time changes in the sim. I'm using LNM latest version, LNconnect is 2.69. Sim = P3Dv5.1.HF1.

Hi Alex, Making a Flight Plan in LNM in Indonesia (ID) I found myself an airport more precisely WIPD in an incorrect geographical position, in fact the coordinates of LNM are: 4 ° 48 '0.00 "S 103 ° 57' 0.00" E while the exact coordinates of the airport are: 4 ° 47 '13.27 "S 103 ° 55' 58.80" E as can also be seen from the OpenNav website (https://opennav.com/airport/WIPD) My questions are: 1. Can I change this error? 2. How can I add an airport in LNM if not present? because if I add it as a user point, creating an airport then it is not possible to add it to the flight plan neither as departure nor as arrival. thanks for your attention Mirko Castellani

Hello,no joy whatsoever with the latest LittleNavMap v2.6.11,cannot get ATC to show on the map.What is wrong?

Hello, Thank you for the continued work on Little Nav Map! One of the best flightsim tools out there, and I still can't believe its free. I am having an issue with the map not staying at the zoom level I set it to, when I set it to center on aircraft mode. I saw a suggestion on another post about a trick to get it working, but that didn't resolve it for me. Is there any chance you can please allow us to change zoom level when centered, or perhaps add an option in settings to not autozoom?

The logbook seems to miss some destination airports from time to time in both P4 and P5. Is there a way to first backup the existing logbook and re-import everything to create a new one instead of manually editing the missing fields?

Hi, I just start to use Little Navmap and my question is about Flight Plan Calculation. I have added Departure (without departure procedure), Destination (with approach procedure). I select VFR and cruise altitude 2500ft. The direct way from TOC to TOD is throug the prohibited Airspace where no flight allowed. I expect that when in Flight Plan calculation window I press Calculate the flight plan will created not through these prohibited Airspaces. But actually two waypoints were added, one of them in prohibited Airspace (from 0ft to 26000ft). So flight plan calculated for cruise altitude 2500ft through prohibited Airspace with restriciton from 0ft to 26000ft. What se…

I have a new PC with Windows 10 Pro. When I start little nav connect I get the following error message: Server cannot be started: The address is protected. Despite several attempts to restart little navconnet, the error remains. But sometimes it happens when the computer is restarted that the little Navconnect can be started without errors. Does anyone have any idea where to look here?i start lillte Navconnect i becam . Sorry for my bad english, this is a translation about babelfish.

Hello,there is a problem with LittleNavMap v2.6.11 in that when I select Online Flying (in options Online Service:Vatsim) ,no ATC is visible anywhere and also receive a notice at the bottom saying Online Network Failed.Please help.Thanks.benibaz.

In the upper left corner of the map is a small map of the world. Is it possible to hide this? Craig

G'day, Little NavMap is so awesome I hate to make requests, but I will anyway :-) My understanding is that "Adjust Flight Plan Altitude" auto-sets the altitude based on the hemispherical rule. It does it for the initial legs (EG: West to East) but subsequent legs that change to East to West remain at the same altitude. I'd like a few features to make it more VFR friendly, such as: * Be able to print an empty ATA value on the flight plan. * Be able to change an altitude to a manual value. (I could fix hemispherical alts myself then an also have a step alt for passing tall obstructions) * To have the en-route altitudes on the flight plan.

Good morning everybody, does anybody notice the same? After the new World Update 4 (France + Benelux) some (not all) of the new POI (for example Musee Drai Eechelen, Chenonceau) are displayed in LNM as abandoned airports. I think that has nothing to do with LNM but is a new MSFS bug, right? Greetings from Munich Alexander

Hello I would like to display my aircraft on the flight plan elevation profile What is the function I have to select Thank you for your help Yves

Hi, when I display the compass rose for the KHAF airport in P3D v4.5.14 and Orbx scenery, North and the map tilt to the right instead of directly above the display. How do I turn the map display a little bit into the counter-clockwise direction so that the compass rose, North; is actually pointing to 'true north'? Thank you.

Hello I am preparing a flight plan: start at Frankfurt, go to Luxemburg, then Dusseldorf, landing at Amsterdam When I hit WP3 Dusseldorf, it becomes WP2 and Luxemburg WP 3 Is there a way to oblige LNM to leave the order of WP that I decide? Thank you

Is there currently a way to total flight hours in the LNM logbook? If not, it would be a great feature to add.

I have an add-on installed, which results in a break if I update my scenery files in Little NavMap. Please see my screencopies (why is it not possible to import JPG-files in this topic? My failure?) https://1drv.ms/u/s!AkHgBRK3dMktydI0C1yk57s_AN46jg?e=GE70b8 As you can see, I excluded the directory with this AddOn in Official/Onestore in the LNM settings/scnerybibliothek, but LNM wants to load it again. If I move that AddOn directory manually to another directory and starts reading of the scnery library in LNM again, it works.

How do I know which is which? For example, there's a DA62 Orange and a Diamond 62. I'm assuming one is from a modded file, but how do I know which one and which mod? I'm getting ready to plan a gigantic world tour! Multiple planes and legs! This is gonna be fun!

This is a great program and I really enjoy all that it does. One minor question: Is there a way to format the logbook UTC time in 24 our format? Thanks,