Little Navmap | Little Navconnect | Little Logbook Support Forum

Hallo, wie schon erwähnt wollte ich fragen, ob man Flugpläne aus LittleNavMap in SimBrief importieren kann.

Hi, I fly a lot with the dc6 PMDG on FS2020. These planes did not fly very high, between 10,000 and 20,000 'approximately. When we generate a flight plan on LNM, he wants to follow the procedures concerning the levels of flights and often I am too low! So LNM does not want to calculate the flight profile and does not calculate the fuel consumption. Is it possible to tell him not to take into account the flight levels to be respected? Thank you Jean Noel Barruche Barrois

Hi Alex, have you had any reports of strange results in LNM when loading the scenery database from the SU5 beta? After loading a new Scenery database from the sim I'm seeing runways in LNM which don't exist in the sim and also on some of my custom scenery which is overwriting an Asobo base airport where I've removed the parking spots the parking spots still show up in LNM. Any testing I can do to help out just let me know best regards Kev

I have just downloaded LittleNavMap 2.6.13 (having deleted the older versions) and set up shortcuts to LittleNavMap and LittleMapConnect which I have done many times in the past. I have also set up 2.6.13 on my laptop to run the moving map. However on running LittleNavConnect, I get following error message: [2021-07-10 17:34:15] Little Navconnect [2021-07-10 17:34:15] Version 2.6.11 (revision 36c5865). [2021-07-10 17:34:15] Data Version 11. Reply Version 5. [2021-07-10 17:34:15] Connecting to X-Plane using the Little Xpconnect plugin. [2021-07-10 17:34:15] Starting server. This can take some time ... [2021-07-10 17:34:15] Server is liste…

Hi ! I was wondering why I have a "double" ILS on my LNM map... This LFPO is an add-on airport (by Jetstream Designs). When excluding path of the add-on, all works (this airport already exists on MSFS). I don't remember having this issue on old releases of LNP (or old version of LFPO ?) Thx a lot !

Hi. I’ve been using this fantastic tool since MSFS was released but finally got frustrated with the differences between the pile of dung that is the MSFS navdata and the AIRAC in LNM so decided to spring for a Navigraph navdata subscription. I have successfully updated both the sim and LNM using the Navigraph tools but have noticed that when using Navigraph for procedures and navaids only and MSFS for airport scenery that taxiways are labelled incorrectly in LNM. This is weird and may be a MSFS bug because they are correctly signed in the sim and ATC also uses the correct names on the ground to direct you, but the labels on the map which should in theory come from the si…

Long time user of LNM in FSX, P3D, XP11 and now MSFS and trying to set up as a remote on a spare notebook running Linux (PopOS, KDE-plasma) After installing LNM loads ok but there is a small orphaned window that sits on top of and to the side of LNM that appears to be left from when LNM loads. I can move the LNM window around but the other (unlabelled) window remains on top of LNM. I did a fresh download and the same thing happens Love some help on this please (I did try to do a search for "Linux" as a keyword but nothing shows. This is a separate issue I have with searches in AVSIM. (See attachment) https://mega.nz/file/Gw1UmS7Z#6tacjfscfJ…

I'm using the new maps that have been kindly provided but even on the standard ones the islands appear to be named in their own language. Is there any possibility they could have English ones as an alternative? I'm flying over the Greek Islands at present and sadly, my Greek isn't up to much so I can't identify the islands.

Hello, I am an avid user of LNM on Linux with X-Plane 11. Since I installed LNM 2.6.13, it seems to have a problem with the control of altitude restrictions especially in the final ILS approach that prevents calculating the flight profile. See the following image. Indeed, the altitude of EBBR (Brussel Airport) is 184ft, but runway 25R is at 102ft with a TCH (Threshold crossing height) of 156ft. And so the validation fails because 184ft > 156ft. I have this problem on some other airports, is it due to the AIRAC Cycle 2106 update that adds this restriction, it is possible. Perhaps a tolerance of +/- 100ft should be added on checks. Thank you again so much for…

I punched in the IP address and port on my iPad browser, but nothing shows up. I've had the same issue with a different software (Martin Caron's MSFS Mobile Companion) and I suspect it's because my PC isn't on the same network as my iPad as it's connected via Ethernet and the iPad is, of course, on a WiFi network. What can I do to resolve this issue? I'd obviously much rather keep my PC on Ethernet! EDIT: Renamed my Ethernet profile name to have the same name as the WiFi one the iPad uses...no good. 😞

Hi 🙂 I just wondered what is the best way to use LNM with celnav to create line of positions? Would you just use ctrl leftclick to make a range line, and then manually do the math to make perpendicular LOPs, or is this something that LNM can do automatically?

Hello, I attempted to load up a flightplan between KSEA and Sitka, Alaska (PASI), but in little navmap it shows a destination airport of Campo Di Volo Pasiano instead. On the map itself it shows the Sitka area, but clearly the flightplan does not match this. Any ideas? Attached screenshot: https://prnt.sc/186fh42

Does anyone have aircraft performance settings for the following planes that they can share? C172 G1000 Carenado C182 and any others is also appreciated

I have the Steam version of MSFS installed on my F drive but after installing a fresh copy of LNM v2613 it states that there are no flight simulator programs installed and the database is empty. When I try to manually load the Scenery database it shows the simulator as X-Plane 11 which I can't change and no longer have installed and that it can't find the Resources Folder in the MSFS base path which is not surprising since MSFS doesn't have a Resources Folder. For now I reinstalled my Steam version of XP-11 and am using it's Database.

Is it possible to edit your flight plan in LNM once you've started your flight? Such as, adding a waypoint? Thank you

Hi all, So, on my FS pc (msfs) the gates in little nav map and taxiways are shown. NICE! I however use a remote latpop most of the time as "efb" charts etc. After copying the database file per instruction, I don't see them show up. What am I missing here? :). A step for sure, but which. Cheers Vic

I know that I can just right click on the gate I want to spawn at by going to the gate on the map and right clicking. It is then supposed to show a menu where you can set the gate as departure. For me it does not work at all. It is blanked out even when right clicking on the gate. I also create the flight plan using the description.

Hi friends 😀 When I fly the Laminar Boeing 737-800 (B738) LNM is shows an Aircraft performance not valid notice. I went online to see if there was a Laminar B738 file on LNP aircraft performance (https://www.littlenavmap.org/downloads/Aircraft Performance/X-Plane/) but the only B738 file there is for the Zibo. Would anyone on here who has the Laminar B738 performance parameters be willing to share the file please? Thank you and thank you Alex for the excellent software.

After upgrading XP11 to 11.55r1 (beta) and synchronized LNM library, many international airports can be seen as empty/"grey" airports under LNM, for example YSSY airport. To solve this problem it's necessary upgrade XP11 to newest version 11.55r2 (was released 2 days ago) and then resynchronized/reload of LNM library and everything is ok 🙂 It's because of bug XPD-11278 in XP 11.55r1 - missing 3D flags for airports. Regards, Piotr

I'm sure it's in the manual somewhere, but I can't find out how to stop the map from re-centering on my plane while in-flight on my sim. Sometimes ATC will assign a different approach than the one I used for my flight plan and have to change it accordingly and it helps to see how the approach, transition, etc. works out visually on the map before I plug it in my Garmin/FMC. It gets a little bit frustrating that I have to move the map back to the destination airport to work out the approaches after it automatically re-centers to my plane. Thanks in advance!

Can someone tell me why the Online AI traffic shows up only on a tight zoom of .3 miles and if they are scattered over the airport you have to pan around to see where they are but once they are airborne they pop right in LNM, as soon as they land they are gone again except on a tight zoom! While airborne zoom limit does not matter! Little NavMap Version 2.6.11, P3D 4.5 Win 10! Thanks in advance for any information!

Is it at all possible to set different altitudes for different legs on a VFR flight plan. Reasons could be East bound then changed to West bound, or could have a different terrain altitude, or specific obstacle, etc., etc. Regards, Dane

Noticed there wasn't a performance profile available for the DA40NG, so I made one. This is based off the mod mrtommymxr made, and will ONLY work for this one, NOT the default Asobo version. Get the mod here: https://flightsim.to/file/2738/da40-ngx-project And the profile here: https://www.littlenavmap.org/downloads/Aircraft Performance/MSFS/Diamond DA40NG Modded.lnmperf Enjoy!

I've updated MSFS with World Update 5 which implements AIRAC Cycle 2106. Then I reloaded the Scenery Library in LNM. If I select "Use Navigraph For Navaids And Procedures", I see the AIRAC Cycle in the Title Bar (1801). When I select "Do Not Use Navigraph Database", should the AIRAC Cycle that MSFS is using be displayed in the Title Bar? In this case 2106. Or in the Menu dropdown where the other 2 choices show the AIRAC Cycle (X-plane and Navigraph). I didn't see the MSFS AIRAC Cycle shown on the "Load Scenery Library" dialog box either, but I may have missed it. I have the latest rev installed for both LNM and MSFS. Thank you in advance!

What is this artefacts? It appears only on place on map where i launch MSFS2020. LNM 2.6.13 and MSFS 1.17.3.0