Little Navmap | Little Navconnect | Little Logbook Support Forum

Hello everyone! I have been using this program in Xplane11 for a long time. The ad says you can export your flight plan in GTN750 format. "Flight plans and flight plan fragments can be loaded, saved and merged all using the common Flight Simulator PLN files as well as X-Plane FMS format version 3 and 11, FSC and FLP files. Flight plans can be exported to the Reality XP GNS 530W / 430W V2, the Reality XP GTN 750/650 Touch and the Flight1 GTN 650/750. More export formats are GPX (GPS Exchange Format, including flown track), PMDG RTE, FLP, X-Plane FMS 3 and 11, Majestic Dash FPR and many more. FS9 PLN and FSC plans can be imported. " I have not found anywhere in the menu or …

Not sure what is happening, but if I don't interact with LNM (v2.6.17, Win10-64) say for 5 or so minutes, when I try to zoom in/out or check on info at an airport icon or even hover my mouse I get the hourglass timer for about 10-15 seconds before it responds! If I interact with it on a regular basis it does not seem to do this as bad! It is a bit of a hassle when you want quick info and you have to wait for anytime at all while flying is a bit annoying! Is there anything that I can possibly do that may put an end to this happening? Any info would hoefully be helpful! Thanks, Roger

Been using this for a while now, today all the sudden when I select an airport to depart from or land at the buttons are not clickable. Also I have MSFS on D drive and it cant find any data, I have been using the XPlane 11 data. This isnt the issue since I have been using it like this since the beginning but would like to load the MSFS airport data instead on XPlane. Any Ideas why it will not see the files when I select the MSFS 2020 folder on drive d? Thank you!!

Hi All I am looking for a good tutorial on how to use the MultiExport function to load LNM flightplans into the CRJ. I have tried a few times but I cannot see the saved flightplan from the MSFS Load UI - I suspect because it is still saving as an incompatible .format Also can anyone confirm whether SimConnect is part of the Little Nav download or does it need to be loaded sertaely? Thanks

Firstly, thanks for one of the best flightsim addons ever! It would be awesome if LNM could export flightplans for the new Aerosoft CRJ for MFS. The file extension is ".flp" and below is the flightplan format details that come with the documentation. Plus Simbrief can now also do the export. CRJ Flightplan Format The CRJ uses a standard Windows Ini‐File to store flightplans in. It contains three sections: “CoRte”, “PerfData” and “VNAVData”. Flightplans are stored in the user’s “Documents” folder under “Aerosoft\Digital Aviation CRJ\Flightplans”. The default filename extension is “.flp” CoRte Section ArptDep Departure Airport (4‐…

Hello to all LNM users. On running the last versions of LNM, It has created two new trees to keep airports, flight plans and so on. It is a good idea BUT : there is a tree with names in french, another one with english titles and my original files are always in their previous directory (D:\Documents\Prepar3D v4 Files\LittleNavMap for instance for the .lnmpln files) Having a lot of files created since I use LNM (and thanx for it !), I had rather keep the new files in their former place instead of the two new places. My question is : how to get rid of the new directories (I suppose that simply deleting them from Windows Explorer wouldn't be sufficient.) I didn't…

Hey guys - I've been busy downloading custom airports for MSFS and then re-loading the LNM databse, which then places yellow circles around all of the custom airports so you know which are default and which are custom, which is an awesome feature. However I just got this scenery for Anchorage Airport, but it's not giving the airport its required yellow circle. And I checked down the airport info for the data source under "Community" and it's not showing up there. I'm wondering what's going on and why this airport isn't getting recognized by LNM? Thanks! Ted Stevens Anchorage International Airport, Anchorage AK USA - PANC V1.2 » Microsoft Flight Simulator

Been having an issue with MSFS2020 crashing to desktop. I am a long time user of LNM and never had any issues untill SU6 for msfs. It always happens on approach within 20-30 miles of the destination. Does not matter the airport, region, or aircraft. I have disabled AI traffic in the sim and made a few other changes to settings but still have the issue. Can fly for an hour or two with no issues but usually just as I am turning to final POOF CTD. Also have noticed occasionally LNM will pop up it's icon in the tool bar flashing orange as if it needed some attention. But nothing seems to be out of order. Tried turning off most all of the online stuff in…

Hi, I have a custom openair airspace which is quite small. I want to use LNM to check that I stay inside this small airspace during maneuvering. The problem is, that the airspace automatically disappears when I zoom in closer. I have not found a setting where I can set the zoom level when airspaces disappear. Is there no such setting? If not, is there any other way I can force airspaces to be displayed at any zoom level? Maybe by editing a parameter in the source code and compiling my own version? Thanks in advance, Martin

I made a route (YSSY-YMML) on the latest version of Littlenavmap, using SID 25 for departure and STAR 16 for arrival at Melbourne. When I import it to X-plane, the second waypoint is a vector a long distance away from the route, and is not connected with the rest of the flight plan. I'm not sure what's wrong and I'ts anying me that I need to make a manual departure.

, hej Min ven og mig er connectet til en joinFS server. Når vi er på jorden og når vi ser hinanden i LNM, vender flyet forkert. Når vi ser hinanden i luften, vender vores fly korrekt. Hvordan kan vi løse dette problem ?

I'd like to fly the exact wayplan I plotted in LNM but I notice MSFS keeps on adding waypoints to the plan as soon as I load it. In a VFR plan with Direct GPS MSFS adss points like Timeclimb and Timeapproach and often in the most odd places. In a VFR plan with VOR to VOR it adds VORs. With IFR it adds approaches... Is there a way to stop MSFS from adding odd waypoints so I can fly my actual LNM flightplan? EDIT Never mind... I've been away from MSFS for over half a year and didn't know about some new 'features' like automatic waypoints being added by MSFS... Geez... what where they thinking... Make something like that optional please...! 😕 Anyway, LNM is fi…

Hi all, I have just found Little Navmap and I'm amazed at how good it is, however, I do have one problem. When creating a flightplan, I don't know how to insert an airport into the route. What I am trying to do is fly from East Midlands Airport (EGNX) to Canberra (YSCB) in 500 mile hops, landing at an airport near to the 500 miles so I can refuel and have a rest. I have set the route from EGNX to YSBC and along the route I want to be able to select an airport to land at and take off again to continue my route.

Can anyone help with how to import the below list of airports as Userpoints? https://forum.aerosoft.com/index.php?/topic/165562-what-airports-are-covered/ I've tried the Import CSV with a CSV file of just the airport codes but get an error about needing Longitude. Thanks

NOAA Vatsim Ivao weather not downloading anymore? When I click the weather in Airport information nothing is displaying anymore, and receiving warning saying Download failed.

Hello The start screen "Little Navmap" appears always on the main monitor. How can I move it to the second monitor? Thanks a lot for your advice.

LNM says, before installing new version: " Delete all installed files of a previous LNM befor installing a new version." Which are the installed files, and where are they? Web server...when I click on Web server, then click on Open Webserver Page in Browser, get " Can't reach this page. Check if there is a typo in new-flightsim-lan." Any help with these issues please? Don.

Hi, I have a few Simbrief flightplan, both in print and as PLN files. What would be the best way to enter them manually into LNM? I tried entering a manual logbook entry, by filling in the departure and arrival airports as well as the takeoff and touchdown times and finally the route information. It seems that no matter what I do the only thing I get is a couple yellow circles around the airport. I cannot use "Show on map" for example, nor is the flight shown as a direct line or as actual route (lines from waypoint to waypoint). What I would hop to accomplish is to be able to view world map with all destination airports and arrival airports for the highligh…

I know how to change route colors, but is it possible to customize route stroke color and thickness? I mean, use another color instead black? Is it possible to set a transparency? Any CFG/XML/INI to edit advanced options?

I added an alternate download location in the LNM download section: https://www.littlenavmap.org/downloads/GLOBE Elevation Data/ Just in case the download page https://ngdc.noaa.gov/mgg/topo/globe.html is not available. Alex

It is possible to import Openstreet(car road) to Little navmap(msfs 2020) ? I am using car mod so that's why i want road navigation and not airplane navigation. But i use airport as start point and another one as arrival but i want the car navigation waypoint from openstreet to Little nav map if its possible i want to know how thanks a lot. Sincerely,SebastienS

Hi Alex, After I downloaded this new version (2.76.17) I copied it over version 2.6.16. When I fire up the new version the application hangs in the splash screen. After a minute waiting I closed LittleNavmap and installed version 2.6.16 again, which runs flawlessly. Do you have any idea what I might have done wrong? Best regards, Hans

I have just started using little navmap with MSFS2020 on my windows 10 PC and it works brilliantly. When I connected a second monitor to run little navmap I am able to get a connection but have a message at the bottom of the screen saying database is empty. I have copied the data base from my main computer and tried copying it to my second computer as the instruction state. It doesn’t seem to matter where I copy it to I still get the same message. I am clearly missing something and as someone with limited knowledge in computing this has left me baffled. if anyone can help explain in simple terms where I am going wrong I will be very grateful.

Hello Guys, whenever I want to connect Little Navmap to Xplane11 (same machine, Little Xpconnect is correctly installed, Windows, latest version of LNM) I get this error: Error receiving data from Little Xpconnect: Version mismatch Update Little Xpconnect to the latest version. Your installed version of Little Xpconnect is not compatible with this version of Little Navmap. Install the latest version of Little Xpconnect. Is there something I am doing wrong?

not complaining but I notice that the aircraft are not sitting on the pad..is there something on my end..I need to tweak. This is lates LNM and MSFS. Thanks, BobM.