Little Navmap | Little Navconnect | Little Logbook Support Forum

Hi Alex I have downloaded Australian VNC and VTC charts in PDF format from this site https://www.airservicesaustralia.com/aip/aip.asp?pg=60&vdate=07NOV2019&ver=2 Is there any possible way to use these charts in LNM? I suspect not, but if you find a way I am quite happy to test it for you (I am one of your beta testers). Many thanks John

I am having an issue where the map is located at KDFW, moving around the area causes the system to freeze up. The freezing does stop though. Is this an issue with littlenavmap or something else. Thanks.

Gents I would like to use Sky Victors style Mapping into Lil Nav Map, is it possible? Thanks RangerDale

Because I use the Garmin GTN750 with a previous AIRNAC I would like to use that AIRNAC in LNM and not the present one. The tab in Scenery Library does not give the opportunity to change the AIRAC. Thanks for help 🙂

Good Day and thank you for taking my question. I have been running LNM on a remote PC for some time with out issue. I have always displayed it on half of a 27" monitor. Suddenly I can only adjust the horizontal width to a width that will not fit where it used to. I can adjust the vertical dimension as much as I like but the horizontal will only reduce to a certain amount. I would appreciate any help on this as it has worked so well for so long and now it is blocking other parts of the screen. Thanks Kevin

I want to start by saying THANK YOU for making LNM compatible with MSFS 2020. LNM is Amazing! This is the must have flight planner for MSFS. I have a question about using little nav map with a second monitor. Right now I have the 2nd monitor set as "extend" and have moved LNM window to the second monitor. Maybe I need to run as as duplicate? When I'm running MSFS in my main monitor, I can easily see and identify all the default AI & AIG Traffic in the area by hovering the mouse. However if I want to click on the map to get any kind of info the sound on my main monitor stops. I can then click on my main monitor and get the sound back. Is there a setting …

Hi, I remember when saving a flight plan that the filename contained the departure AND the destination airport name with the kind of flight rules used (VFR or IFR). Now when I save a plan, I get only a filename with the departure airport name, and I have to manually edit the filename. Can I change this behaviour ? Thanks for help.

I noticed that this has been added on LNM's github, but how do I access the SID/STAR preview? This was a feature that I requested awhile back and see that it has been finally added but I still don't see it.

For the download and installation of new maps for LNM I followed the instructions "To install the maps, download and unzip the file, then copy and paste the folder data found inside it to the location where you have your copy of LNM installed. Say yes to overwrite, when asked. You'll find my maps in a drop-down list." I did so but when opening LNM these maps don't show in the LNM drop-down list????? Any advice. Thank you.

I created a flight plan EGPH - EGPF with an ILS approach and exported the file as .gpf. When I load that file in the GTN750 I see the legs, but NOT the leg between EGPH and the start of the ILS approach leg. I don't know how to insert a picture in this topic 😞 Any help is much appreciated 👍

Gents: I seem to forget how ! and did not find the adding Heading on my flight path so may know that course to use .My little navMap up to date 2.6.1.7and use on MSFS 2020 Thanks for your help RangerDale

Hi All Apologies if this has been raised before. I am getting an error message regarding wind data and my blue wind icon drop down is greyed out at all levels. "Error downloading or reading wind data:Error transferring https://nomads.ncap.noaa.gov/cgi-bin/filter_gfs_1p00.pl?......" Any suggestions welcomed please

Does anybody have any aircraft performance files to share? Looking for airliners. Or, is there anyplace to download these? Many thanks! P.

Hi Alex, If possible, would be great if the "Load Scenery Library" could also do an incremental update if say one airport addon has been added to the sim and you could direct the database update to that one airport folder to add the custom airport to the database without having to wait for a whole database update. Thanks, Steve

I tried making a route earlier, then made the return flight of that route (LGA-DCA). However, when looking at the altitude chart for DCA-LGA, the route is automatic set at cursing altitude, no climb or descent. LGA-DCA gives me proper climb, descent, and TOD indicators.

I have created a User Waypoint in Little Navmap where an airport exists that is not in the MSFS 2020 data base. Can you tell me how I can use that waypoint as a Departure or Destination point when creating a flight plan in Little Navmap (to be exported into MSFS 2020)? Or is there another / better way to do this? Thanks.

Hi Whenever I zoom in (during flying or on the ground) LNM jumps back to a certain zoomlevel after a few seconds. How can I stop that and keep it zoomed in in the level I want? tried searching in setting but unable to find where I can adjust this. Is it even possible? Cheers Pip

Hi people...! I have an issue with Little NavMap (v2.6.10) in the the OpenStreetMap , OpenTopoMap (or any of the map data) is showing in the main map window - even with all of the overlays switched off. Having updated the scenery libraries from MSFS 2020 (Microsoft Download version) and the global height databases, info such as airports and all other data are showing in the overlays. I have checked my firewall and AV protection and there are no issues there (as far as I can determine). I have also installed/re-installed the Little NavMap several times with no joy... Can anyone help with this? Thanks, Rob

Hello! I'm having an absolute headache of an issue. I'm attempting to use LNM to create a bush trip, and I wish for the starting airport to be YBRA (Benambra Airstrip) However, YBRA is not in LNM. YBRA is in MSFS2020...... But i cannot seem to import any airports from MSFS2020 into LNM. (I use a Laptop for planning in LNM, while my Flight Simulator is installed on a different computer) Is there a way I can manually add YBRA to LNM without using the import function? Or, Is there a way to get LNM to see my data and community folders which are shared on my home network.

Just found this forum. When trying to download the new maps for LNM, and clicking on the link " File ", I keep getting this message: " The server replies that you don't have permissions to download this file" Detail: HTTP/1.1409 Conflict. Can you please help. Thanks.

Hi All I am new to LN so please bear with me. I have been through the manual but everything seems to point to the need to locate your departure airport on the map . Is there a way to enter the departure airport town or ICAO code in one of the UI boxes so that it then takes me to that point on the map? Thank you

Hi Alex and everyone, I may have missed this change in the past, but looking at certain airports since my last update such as the one included in the image below, I have noticed that some of the structures are gray and some are green. I guess that does not hurt anything that some are green, but I am wondering why. Thanks for this outstanding contribution to the flight sim community! Warmest Regards, Bob Domine https://imgur.com/a/oLLNwFj

http://"C:\Users\User\Desktop\map nav map.odt" Hello, problem with the card? I reloaded the application nothing or done I do not understand, see photo thank you

Hi. There. Long-time user here of the best flight planner ever created. 😃 I have a feature request that I would love to see. In the Airport >>> Overview >>> Links section, where the links to FlightAware, SkyVector for your selected airport is. Would it be possible to add a link to ChartFox, that takes the ICAO of the airport you have selected and searches for that airport in ChartFox? Thanks for your consideration!

If I have a certain view and i want it from resetting to another view..how do i do this? https://imgur.com/sV0euCI https://imgur.com/EN92x8n Thanks any one especially Alex 🙂 BobM.