Little Navmap | Little Navconnect | Little Logbook Support Forum

Is there a way to revert to an older AIRAC cycle after updating to the newer?

Hi, as it's said in the title in the 2 last releases of LNM (2.6.17 and 2.6.18), the mod "fs-base-ingamepanels-lnm" does not wok, even I have reload from Github. Thanks to give me how to fix this issue.

Hi Alex - The two images represent my Mapbox map and that same map in LNM. I have turned off all the road shields etc in mapbox but I still see all the highway signs in LNM. I'm assuming that LNM is adding them but I can't find a way to toggle those on/off? Thanx, Vic

hej efter den nye opdatering 2.6.18, er det så muligt at mig og min ven, flyver på fs2020 serveren og så kan se hinanden i LNM ??

Hello, after upgrading to 2.6.18 I regularly experience that my flight starts on the runway even if I have selected a parking spot. Running MSFS SU8. Has anyone else experienced the same?

NOAA has changed the web-address and I cannot fix this except in a new LNM release. I'll try to publish a minor release next week. Sorry, for the delay. Too much stuff cooking now.😞 Keep NOAA winds off until this is fixed (menu "Weather" -> "Wind Source" -> "Disabled", use "Manual" if needed). If you use X-Plane switch to wind from simulator by checking "Weather" -> "Wind Source" -> "Flight Simulator" which is the better choice for X-Plane anyway. This is where the winds afoft data a is coming from: https://nomads.ncep.noaa.gov/ Alex

If one use a different callsign in MSFS2020 as in VATSIM vPilot you see 2 moving aircrafts in LNM. I know Alex is aware of this, but which version will solf tbis issue? THX

With the release of the Boeing 247D tomorrow it seems we get full world coverage of Low-frequency radio navigation beacons used in the 30s. There is a mod out there since a while here with US coverage, but we might get full world coverage tomorrow with the Boeing 247D. If I understood correctly, it comes with a CSV file ready for import into LNM, so we can plan our fligths properly. From the preview videos I have seen, the import seems to use the TACAN symbol. But looking at the documentation from the Mod mentioned above, it seems there was a common symbol used on the maps. I tried to figure out how I can import my own Icon into LNM for these NAV Beacons, but it seem…

I've searched the forum but can't find an answer to this. The course between two VORs in Little Navmap is different from the course shown in the MSFS Nav Log between those same two VORs. For example: From LVL (112.90) (calibrated declination 8 degrees West) To SBV (110.40) (calibrated declination 5 degrees West), 54nm away LNM shows the true course as 261 and the magnetic course as 266. MSFS shows the course as 271. It was my understanding that LNM uses the magnetic declination information in MSFS's magdec.bgl file. So why do MSFS and LNM show the course differently? What am I missing?

Using latest dev version downloaded today - been playing around with Mapbox maps to get a decent combo of topo and street - wound up using the Satellite Street combo. All is fine except the airport text is a dark red on white background. I know how to completely remove the white b/g but: 1) how do I change the color of the bg 2) how do I change the color of the text? This would only apply to airports. Thanx, Vic

Recently noticed that many airports are now showing two ILS 'feathers' one of which is for a LPV type approach with the WAAS channel indicated as a 'frequency'. Was this a recent addition or did I turn something on by accident? BTW they are noted in the map as an ILS approach which technically is not correct ;) Technically it is an RNAV approach with LPV if I understand it correctly. Chances are you guys are well aware of this but just thought I would ask. Thanks!

Hello Alex and All, Using LNM v2.6.18 and MSFS 2020 1.24.5.01. I have been unable to add Departure Runways to my Flight Plans for Airports that have no published Procedures. EXAMPLE: ORAA2. In the Search Window I have been unable to reset the procedures TAB after selecting different Airport. EXAMPLE: ORAA is the selected Airport, but previously selected Airport OR1B displays in the Procedures TABHelp Please? Regards, Mike KETB

X Plane on an M1 Mac I noticed that the Montreal approach selection is not available.though it shows the ILS paths....Do you have to select the ILS approaches on the G1000 instead??

Hello. I'm a relatively new user of little navmap and I ran into a problem. I searched the manual for this but I couldn't find anything. Is there a way to specify how accurate flightplan information is? For example every heading is round up to 1 degree, but I am in need of headings accurate down to 0.5 degres.

Planning flight to KATL via CHPPR to runway 9L. I get the above message and when pressing the red banner I get the explanation that the flight plan elevation at 11,000 feet violates the restriction of 13,000feet. However, the flight plan window shows an elevation of 13,000 feet. Have I something mixed up?

Morning all, LilNavMap a great program. A friend and I just started using LilNavmap when we fly online. He flies P3dV5, I fly XP11 (latest). WHen he connects he can see my plane on the map even though I am in XP11, but I can't see his plane when I am connected using the XP11 connection. Is it something on my end in settings> I looked under the view tab, and the Show AI and other multiplayer aircraft is on. Thoughts? Am thinking it's just on my end since he can see me on the P3d connection even though O am in XP11. Any assistance appreciated (probably user error on my end). Respectfully, Bill

Does anyone have a performance profile for the Concorde so that I don't have to create one from scratch? I'm lazy. 😀 Thanks.

Wanted to see if this had come up with anyone else....I am on a Mac and latest LittleNav Map version and I fly Xplane 11 with a StreamDeck button box.The StreamDeck can open any app or file etc using the Open button option. I have never had any trouble with it opening anything... but if I make an Open button for LittleNav Map it doesn't work..??? I get a Terminal shell script type of box but it doesn't open LNM.. I can open it fine from the Dock icon or the icon on the Desktop but not from the StreamDeck.... what do you think??

I posted this in a dead discussion before I realized what I should be doing. So I can't find an answer to this anywhere, but I'm wondering about approach types (RNAV, RNAV+V, LPV). So in the MSFS database for example, this information is present. But the only way to see it as far as I can tell is from within the sim by specifically using the WT G1000nxi mod which will display the type of RNAV approach. Upon searching procedures for an airport it will list the RNAV approaches and whether they offer vertical guidance (LNAV+V, LPV). As far as I am aware, no other GPS available in the sim will show this information. Further to this, I don't see the information offer…

I have problem today with open street map, and the new maps recommended by Alex: osm-de, osme-fr and osm-tf outdoors. All with the same problem. See the photo below no problem with other themes. How I can solve this?

I have been using LNM for flight planning and as I prefer to fly mainly to handcrafted add-on airports the yellow circles around the add-on airports has been a handy feature to find custom airports on the map. The version is 2.6.17. I am now in the MSFS Sim Update 9 beta and downloaded some new airports and then did a Load Scenery Library to get them included. After that load every single airport including all default airports are circled with yellow. I have tried with empty Community folder and with the add-ons in it. I have removed LNM completely (my D:/LittleNavmap folder and the Little Navmap folder in C:/user/myname/Documents and the Contents.xml file) and started al…

Editing more than one logbook entry can result in the aircraft trail (GPX) being dropped from the edited entries. Export the log to CSV or create a copy of the file C:\Users\YOURUSERNAME\AppData\Roaming\ABarthel\little_navmap_db\little_navmap_logbook.sqlite on Windows to have a backup. See manual for the file location on other OS. For now do not use the bulk edit in the logbook. Apologies for the nuisance.😞 Alex

Good morning, since SU 9 beta (I think), all airports have now a yellow ring after a scenery scan, indicating them as addon airports. Or have I made a wrong click somewhere? thank you

Hi, since today when I open little navmap 2.6.16. or 2.6.17 I can not access correctly to the maps and I am getting the message "contact ((user:The DJ)) if you want to maintain OSMdb and /or the wmflabs OSM tiles server.... Does any body know what this means and why it appears in little navmap and what to do to be able to keep on using normally little navmap? Thanks!!

Can't figure out why when I fill out a flight plan in LNM and then send it to the PMS50 GTN750, when I open it, the destination is ALWAYS somewhere in the middle of the flight plan. I try the "Insert After" or "Insert Before" but can't get it to work. So I end up manually filling out a flight plan in the PMS50 GTN750 prior to flight. Can someone please tell me how to correct this? Thanks for the help. Rodger