Little Navmap | Little Navconnect | Little Logbook Support Forum

Am new to Little Navmap, but all the online user (red) a/c icons face North...irrespective of direction of travel. AI icons (orange) face the direction of flight. Am I doing something wrong ....if so ,what setting changes this?

Help, when selecting a procedure from the procedures list, the procedure preview with the blue lines does not show on the map. Any way to fix it. Thanks in advance

I've just started using LNM with MS Flight Sim. If I set up an A to B route with waypoints the autopilot works fine. . But if I set up a circular route to land at the airfield I took off at, the autopilot ignores the route and lands immediately. How can I tell it to fly the route? Thanks

Hello LITTLENAPMAP is great. Is HUGE, I like it very much and is...free. Is a great work and is very easy to use it. I do not know how to know the altitude of de elevation for take the G/S of the ILS of each runway with ILS. I can´t find it. Is possible to know this, please? LNM has it ? Is very important to know it. Thanks

Hi, I have been using your program for quite a while now with 3 simulators - XP11, P3Dv3 and P3Dv5. Now I have decided to add the new MSFS2020 into my sim collection but since I don't have any free space on my laptop, I decided to install it to my removable hard drive. Now comes the issue - in LNM it is not recognized when trying to load the sceneries - there are only 3 options (sims mentioned above). Connecting to MSFS2020 works fine. I have tried to find a solution but internet was no help. How does LNM recognize if the game is installed? Some people said MSFS2020 doesn't have any register entries - I have tried looking in the registry and well, I didn't find anyt…

Hi, I'm looking for the Fenix A320 performances file. Is there one somewhere? Thank you.

Hello! I fly default Cessna 152 in MFS2020. Recently I tried to do 1 hour flight with minimum fuel on board. LNM said that after 1 hour of flight my Cessna 152 consumed 28lbs of fuel. However, in MFS2020, when I opened toolbar and clicked on FUEL section it showed me different numbers. The game said the flight consumed much less than 28lbs, actually. So, how does LNM count the consumption? Does it take the data from the game?

Hi Alex Just wondering is it possible to have the Flight Plan elevation dock window always on top, even after I have minimised the main window? I like to have it always on screen when I am on approach so that I can judge my landing better. Many thanks again for a wonderful,programme. Regards John.

I've just installed latest AIRAC 2207 onto my Ubuntu 20.04 system running LNM2.6.19 and I am getting a fake CTA across the eastern part of Wales from 3,000ft to 19,500ft https://ibb.co/KDfZG38 Here's the information about that area in the centre https://ibb.co/sJWsP53 After extensive searching on the Navigraph site I cannot find that CTA. From what I can see it's an amalgamation of a set of a bunch of CTAs as seen by this highlight https://ibb.co/6g0xr4c Which is a collection of at least 12 CTAs. I don't seem to be able to filter it out. I don't know how the data is presented and I'd be happy to know how to troubleshoot further if anyone know…

Hello! I created a simple flight plan where I have the same airport as departure and destination. It looks like this KMYF N0101A040 CLSTR LNTRN TILRE HAILE KMYF When I take off all the legs from my flight plan become grey. Like the flight is completed. I guess it is because when I am taking off I pass that "destination waypoint" and that's why LNM thinks the flight is completed. How can I fix that? My flight plan is here https://drive.google.com/file/d/113sec8KG4RGL3AonDkK1stUkc2kTErmg/view?usp=sharing

Does LNM have a minimize key. Usually in the upper right hand corner, but I don't find it there. I like to keep it in the background while I'm flying and minimize it to the task bar, so it is readily available when I want to reference it. Roy

Hello! I am new to the aviasims world. So, I planned a simple flight in Little Nav Map. It is a direct flight from KMYF to Santa Catalina's VOR (SXC). I noticed that my Cessna can't catch this VOR. That's because in LNM VOR SXC has wrong frequency which is 111.40. The actual frequency is 114.15. I checked with SkyVector and MFS2020. They both have the correct frequency. I tuned to 114.15 and it worked! By the way this is not the only case. I noticed at least two more VORs with wrong frequencies. Is there any way to correct that? P.S. I installed LNM two weeks ago, so it supposed to be up to date, I guess.

Hi, hope all is well. I'm using MSFS with Navigraph and LNM 2.6.19. I have loaded the scenery library while looking into this issue... no change. LNM set to "use Navigraph for Navaids and Procedures". At airport LOWI, the VORDME "OEV" is missing in Search results as show in the screenshot. At the airport it's shown as WI700 (which shows as a Waypoint in Search results). It does show in the text banner on the map as "OEV / 111.10 / 254M / GS3.8 / DME". OEJ is also strange. It is shown on the map but in Search results it is shown as a Waypoint, not as a VORDME. Also notice that Navigraph shows current version as 2207 rev1, but LNM says N 2205 at to…

In EGPH seems to be (2) taxiways in certain places ??????????? So, why does another player going along a smaller grey marked taxiway "A" for EGPH , whereas when I travel along same taxiway "A" in FSX mine follows the larger marked one? I check out KATL on littlenavmap and I do not see those smaller gray" taxiways, only the larger ones Any clues, are they using diff scenery and Littlenavmap is showing BOTH on the mapdisplay?

Hi Alex, I've noticed that some waypoints for SID and STAR procedures in FSX flight plans are showing an altitude of zero, even when LNM displays a valid altitude. I've come across this while trying to load an LNM exported flight plan correctly into PF3, which read the native FSX format. The files below for a flight from EDDV to EGSS show what I mean - I've highlighted the specific waypoints: You will see that the minimum height waypoint (unnamed, listed as User_WP) on the VAXE1G departure from EDDV is shown as a zero altitude user waypoint. Also BKY15, BPK9 and another waypoint (unnamed, listed as User_WP) on the LOGA2A / ILS FF04 approach into EGSS are s…

In MSFS2020. Loaded Scenery Library. After completion the map doesn't shows only airports which are addons (Yellow Ring). None of the other airports are displayed, along with a lot of the other items. After completion of download data shows 12,169 airports. I click OK, the open it again and it shows only 351 airports which is confirmed by looking at the map. Also missing are a lot of Waypoints and other items. How do I fix this. If I right click on say, KORD would be, the departure item is greyed out. Same with other airports. Roy

Little Navmap Probably this problem raised and solved long ago. As new user, I cant get the yellow line to display the route between start and destination of flight plan. Have previously had no problems with LNM until had to reinstall it. Probably a setting but I can't find it. Any help would be appreciated

Hi, in MSFS the airport layout of the addon will not be identified by Little Navmap. MSFS shows the correct data. All other addon airports hare displayed correctly. What can be the reason? regards, CFG023

I am having trouble creating a flightplan when adding waypoints. I can't prevent LMP from adding the waypoint as the next waypoint from the SECOND LAST waypoint added instead from the last waypoint added - hope you understand what I mean. I have seen a video tutorial creating a flight plan using the MSFS flight plan creator where the same thing happens and the author mentioned this and states to simply remove that waypoint and add it again and MSFS will correct the 'problem' yet when I try the same thing in LNM it doesn't fix it. Surely there is a method to use which I cannot work out.

Greetings, I am running Little Nav Map on a Windows 10 laptop. I've attempted to install LNM 2.16.19, but the map window only displays a graphic with the word Marble and a compass. LNP 2.16.18 ran successfully. LNM 2.16.19 is installed in a fresh directory, and I renamed C:\Users\{username}\AppData\Roaming\ABarthel so that file structure would be recreated. Thanks

I am having trouble creating a flightplan when adding waypoints. I can't prevent LMP from adding the waypoint as the next waypoint from the SECOND LAST waypoint added instead from the last waypoint added - hope you understand what I mean. I have seen a video tutorial creating a flight plan using the MSFS flight p0lan creator where the same thing happens and the author mentioned this and states to simply remove that waypoint and add it again and MSFS will correct the 'problem' yet when I try the same thing in LNM it doesn't fix it. Surely there is a method to use which I cannot work out.

Hi Running MSFS 2020 Sim with addon airports. In LNM there are no airports showing with yellow markings. My Sim base path is D:\MSFS2020 and I did a Load Scenery Library. No exclusions in the "Scenery Library Database". I get 40674 airports loaded but none are with the yellow ring, I pressed the button "Force map to show ..." Using MSFS addon Linker and selected all addon airports and can see the links in community folder. What is wrong here? I have installed Little Navmap Version 2.6.19 (revision 18757514) atools Version 3.6.19 (revision fef0d34b) Regards, Rene

When I transfer a LNM flight plan with SIDS and STARS, I notice that there are more waypoints in the STAR than appear in LNM. I was wondering what the reason that these waypoints are not present. I like to follow the flight in LNM and the missing waypoints can be added but by then I used a lot of available time.

I read some topics here and there that this is a complex function to implement, hence it is not supported. I am wondering how others do this? My workaround is to create it in Skydemon first: And after that add the altitudes into the Remarks column so I can follow it. For a long flight it might be a bit of a work. I tried to export from Skydemon and import into LNM but did not work. So how everyone is doing this?

Hello We use the transmitter add-on for allowing us to see each other in LNM in MSFS and it’s great, however there should be a way to filter yourself out from the multiplayer aircrafts received by LNM, otherwise you see your own plane twice. The original LNM detected in MSFS (white) and another one red from the incoming multiplayer data.