Little Navmap | Little Navconnect | Little Logbook Support Forum

Hi, Wondering if anyone can help. I upgraded to Win11 recently and since then I can't load the MSFS Scenery Library. It connects to the sim fine and aircraft shows on the map etc, but MSFS is not showing in the Load Scenery Library window, it is just showing xplane which I have never owned. Screenshot below. https://ibb.co/zVWQZMz Thanks.

Hi Little maps is absolutely amazing and thank you for the time and effort that has gone into it.... However I have a small request that would make it more usable for people like myself with the following setup.... I am running a seperate screen for the heliops program and littlenav map alongside my Main screen for fs2020. The problem I have that I cannot make the width of the little nav window come in enough to fit my screen which is a wide screen in portrait mode.... the idea is that I can stack windowed programs on it whilst still having fullscreen simming on the main monitor. All other windowed programs that I have can do it just this restriction …

Hi, Is it possible to change the font of the OSM labels on the OSM map? They are O.K. when zoomed out but when you zoom in they get really very small. Thanks. Klaus

Planning a flight into KORD. Checked ATIS: ORD ATIS INFO Y 1751Z. 34009KT 8SM -RA OVC060 16/14 A2984 (TWO NINER EIGHT FOUR) RMK AO2 SLP103 P0009 60020 10206 20161 58003. ARR EXP VECTORS ILS RWY 9C APCH, ILS PRM RWY 10C APCH, ILS PRM Y RY 10R. LNM doesn't show a 9C at KORD. Thanks.

Hi all, I have this amazing program running on an Android tablet as my moving map during flight. Does anyone know of a way to remove the Chrome address and Status bars and just have LNM running full screen? I was able to do it with the Avia Server modules but this is stumping me. Many thanks Warwick

Hello! LOVE using this software! When creating a new flightplan...how does one specify the Departure and Arrival Runways? Sorry for being a total noob! Thanks!

I'd much prefer for Little Navmap to stay at the zoom level I require to see where I am more closely on the map. How do I do this? Thanks, Richard

In the old LNM I could export the whole FLP as waypoints for the GTN that have missing airports or navaids. How can that be done now? Dont see it in the manual. Thanks.

Hi Alex, I have a suggestion (not knowing how big of a change it would be). Right now, when installing a new airport, I have to update the whole scenery library if I want LNM to get the new aiport (gates, etc.). This can take some time. I think it would be nice to have an update funktion for specific/single folders. So you don't update the whole library but tell LNM 'keep everything as it is, but add this folder/airport to your database'. Is that possible? Or maybe it is planned already? Best wishes...

Hi, I updated my X-Plane navigraph data which hadn't been done in a while (last update was 2111). Usually after updating using the FMS data manager, I load the X-Plane scenery library in LNM to have it updated there as well, except this time it seems to choke at 38% on X-Plane/Custom Data/earth_fix.dat (at least that's what the UI says). The UI freezes and the task manager shows LNM crunching at 10% CPU usage but nothing more happens after two hours leaving it like that. It happened with both 2204 and now 2205 using the latest LNM 2.6.18, and I'm not sure why. Any suggestion is appreciated, thanks.

Hi. I'm trying to follow the instructions here: https://www.littlenavmap.org/manuals/littlenavmap/release/2.6/en/INSTALLATION.html And I'm lost at a couple points as a new Mac user. I have X-Plane installed via MacOS Steam. At step 3.3.2 I'm supposed to place XPConnect into the XPlane plugin folder. When I unzipped the LNM archive I got the application itself, the Little XPConnect folder, Little NavConnect, and several readme files. In my Steam XP application folder there is no plugin folder. I thought that it might be created when XPlane starts for the first time, but I still don't see one. Is there something I'm missing?

Hello! I dont know if this was ever asked, but I wanted to know if you maybe think about adding an Altitude Range Arc option for the descent? Or if this is possible at all? Would be a nice comfort function for example for the Majestic Dash8, always nagged me that they dont have moddeled it 😛 Thank you!

Is it possible to update the taxiway designations in LNM? As an example - Airport KACT (Waco) taxiway B should be A and A should be B - see print screen link https://photos.app.goo.gl/E4V2of9aidGysqco8

Hello, Since I have updated to 2.6.18, when I select the theme OpenFlightMaps within France, the map is loaded but immediately disappears to leave a black background. Whenever I change the scale, the map flashes and disappears immediately. Any knowledge about this behavior? Thanks Bruno

Hi, recently i made a few flights with little navmap using a Cessna 172 and an Airbus A320neo to try the logbook function. All flights with the Cessna were logged with very good information and detail but unfortunately the flights with A320 added two different entries with only airports information in the departure slots. Thanks for reading, waiting for a response.

Is there a way to have LNM scan a specific path location for those of us who are using MSFS Addons Linkers to manage and organize all our scenery? I would hate to have to manually go in and check to enable each and every airport every time theres a new update just to have LNM refresh's its scenery db. I rather point LNM to the correct location instead and have it scan all my airport scenery whether or not they are enabled/disabled. For example I have all my scenery located on D:\Community Addons\ and in there I have divided it into sub directories for better organization. I keep all my airports in D:\Community Addons\Scenery\

So I just did a LNM DB refresh to add a couple new custom airports to the map (to get the yellow circles), however upon update completion, LittleNavMap went crazy and highlights every single airport. Did I discover a bug and how can I fix this? Cheers

Sorry if I am not supposed to post a question on NavdataReader here 🙂 MSFS pilot here, using NR regularly to create an SQL file for FS ATC Chatter from Stick and Rudder Studios. FS ATC Chatter uses the SQL file to chose radio frequencies to play contextual chatter... It's normally working great and I just run an update whenever MSFS is updated. The last couple of updates I actually sat watching the screen output while NR was running - yeah... get a life. It's a bit like watching the code from the Matrix though 😉 I noticed a lot of warnings and wonder if that is OK... at the same time FS ATC Chatter is also (I think) reporting more radio frequencies 'Out of…

I use LNM to make a ILS or RNAV flight plan with Sids & stars and when I load it into MSFS2020 the flight plan is there without the SIDs and StARs and just the basic route shown. Also, the only part of the flight plan is in the departure box and that is the starting gate the departure runway, arrival and approach are all shown as automatic. Can someone tell me where I have gone wrong.

I've installed both the latest Little Navmap (2.6.2beta) and the fs-base-ingamepanels-inm. Both work well in MS2020. However, I'm not able to zoom the Little Navmap inside of MS2020. Is there a way to do this?

I have the search box open and I have only the Tower box ticked as I only want to find airports near me with tower frequencies. However it lists a number of airports that are untowered. Am I doing anything wrong? Thanks in advance.

Hello. I am sorry, but i can find, how can i add an airways to flight plan, manually. It only works with the flight plan calculator. Thanks .

As a newcomer to LNM, I am greatly impressed. I have just one issue with it. After searching the Forum extensively, I am now submitting this topic. I am trying to to use an iPad (iPad Air, iOS 12.5.5) connected via a high-speed Wi-Fi link, as a second screen for the Map And Flight Plan windows. Using the built-in web server, I can actually connect the iPad and display the live map. However: 1- the buttons along the top side of the web page (selecting Map, Flight Plan, Progress …) are not visible/chopped on my iPad; 2- updating the map on the main LNM window is not always reflected on the iPad (with 1s auto-refresh enabled); 3- resizing/rescaling …

Hi, Is there already an aircraftprofile for the BAE-146 bt any chance? Capt Pip

Hi, For some reason the steps in my flightplan are not shown correctly. See screenshot. It's like its compressed and I can;t find a way to 'pull it apart' so to say Regards, Pilot Pip