Little Navmap | Little Navconnect | Little Logbook Support Forum

Please advise. Thank you. Found 1 errors in 1 scenery entries when loading the scenery database If you wish to report this error attach the log and configuration files to your report, add all other available information and send it to one of the contact addresses below. Contact: Little Navmap - Contact and Support Configuration: C:/Users/Sadettin KIYGIN/AppData/Roaming/ABarthel/little_navmap.ini Database directory: C:/Users/Sadettin KIYGIN/AppData/Roaming/ABarthel\little_navmap_db Log files: C:/Users/Sadettin KIYGIN/AppData/Local/Temp/abarthel-little_navmap.log Some files or scenery directories could not be read. You should check if the …

When I am in map mode, just recently, numerous small square tiles appear with this message in each one......... Contact [[user:the DJ]] if you want to maintain OSMdb and /or the wmflabsOSM t iles server. can any member advise how to correct this please? Donald Leaton

Hi All, Thanks ahead of time for your thoughts on this issue. I have been using Little NavMap since the middle of last year along with MSFS with little to no issues. That included a flight from KACV to KBOK on Jan 16, 2022. I most often fly only on Sundays. Starting on my flight continuation from KBOK on January 23, when trying to access the OpenStreetMap, Most of the map is blocked out with the repeated message, "Contact [[User:DJ]] if you want to maintain OSMdb and/or the wmflabs' OSM tile server." At the time, the OpenTopoMap seemed to work fine so I used it. This week's flight from KRBG to KEUG, added the more make issue of not showing the airport overl…

Is there a way to remove the airspace shading so that only the outlines show?

Hi Alex, Would it be possible to add a setting where you can specify a default altitude used when creating a flight plan from the route description? Seems the current default is 10,000ft or 11,000ft depending on east/west direction (IFR). Thanks! Steve

I get the messages; "Contact User; the dj if you want to maintainOSMdb and or the wmflabs OSM tiles server"? All the maps have gone degraded. I cans get Australia. Is there a solution please, the program is unusable now. Thanks

Hello, I just installed LittleNavmap 2.0 in a second computer. I copied the database from the computer running Xplane 11 to this second computer, and both are connected trough Little Navconnect flawlessly. But, the OpenStreetMap is not shown on the second computer, not OpenStreetMap, neither OpenMapsurfer, etc. In the first computer (where Xplane11 is installed) is shown as usual. Any ideas? probably I forgot something very basic. Jordi

Hi Alex, recently I bought YBBN from ORBX (from marketplace). For some reason the airport is shown wrong in LNM (seems to not loaded correctly with scenery loader). It misses the new rwys 19R and 01L. The ILSs are there (from Navigraph I guess), but the new layout isn't shown in LNM. Also the gates and parking positions are named wrong (seemed to be from the default MSFS YBBN). I did rebuild the context.xml and also the whole scenery index folder in MSFS (to be sure). Doesn't help. Could be false programming on ORBX side, I don't know. Best wishes to you.

Hi, I am wondering if anyone is having the same issue as me. I use simbrief to file my FP'S and extract them to vpilot and flight sim in order to use them on LNM. Now when I'm in the cockpit I notice that the GPS map on my flight sim is correct but the route on LNM is completely different. Does anyone have the same issue? Any settings I need to change? Thanks

Using LittleNavMap very often, I started using bookmarks remarks for my scenery addons and other usefull info. For backup reasons... where are the bookmarks saved on your harddrive?

The iFly 747 takes a .route format. EFB (Electronic Flight Bag) is able to export into this format, but I don't see that option for the latest Little NavMap...is there a way to do this? If not, is it possible to add this?

Is there a possibility to add SID/STAR names in a separate column without having to click on each and every one to check which is it?

The gate numbers for some airports in Little Nav Map don't match the gate numbers in Navgraph Charts nor do they match the gate numbers in MSFS 2020. How can we edit the gate numbers in LNM or get updated info for LNM from some source?

Hi, I use XP11 with "X-Plane 11 Global Airports Update" :https://forums.x-plane.org/index.php?/files/file/76515-x-plane-11-global-airports-update/ When I build XP11 scenery library, I noticed most Chinese airports have shown on map and flightplan as IATA code. but if I search or create flightplan with ICAO code, it also works. However when save to flightplan, it will save as IATA code, confuse the FMC which try to load them. a workaround for me for now is select "Use Navigraph for all feature" before export, but it's kinda annoying... When check the airport details, there is no ICAO Code line as other airports, but IATA, Local Code and X-plane Ident, the l…

Dear Sir, After updating to Navigraph FMS DATA Cycle 2201 I cannot load LittleNavMap unless I delete all previous database files. After deleting the files, I then don't have the downloaded and installed cycle 2201 as it reverts way back to cycle 1801. Also, I cannot read the map as it is overlaid with reguests that I seek permission to use the 'OSM' map tiles by contacting (User:theDJ) or the wmflabs OSM tile server. (I'm lost on that) I'm confused as to who or what this is all about. I Couldn't find this 'OSM' tile prob on the forum, just the prob of those who couldn't load LNM after cycle 2113. I've never had any problems integrating…

After loading the newest Navigraph cycle I'm not able to start LittleNavMap again. Get a popup warning: "Caught exception in file "\liitlenavmap\src\main.cpp" line 401 I deleted the present app and downloaded a fresh one, but the problem persisted. Any help is much appreciated.

Why do I get this when I zoom real close on an airport.? https://imgur.com/Oe9dkuS https://imgur.com/6Rb7fey Thanks for an y help, BobM.

Hi, I have updated to navdata 2203 via Navigraph FMS Data Manager and now Little Navmap crashes during "Preparing Navigraph Database" phase. It says "Index idx_boundary_file_id already exists. Unable to execute statement. SqlDatabase::exec() error creating query.

Made an XLS-file with all the VFR points for Belgium and Luxembourg airfields, exact coordinates, according to the latest AIP 30 DEC 2021 for LNM. Can i upload this here ? or maybe send it to Mr. Alexander Barthel ? Great program! (file is CSV, direct to import in LNM)

I have just installed "Little Navmap (Version 2.6.17)" and have it running on two networked computers. These are my flying computer and a second, which displays the map when flying. Thanks to the excellent instructions all is working well apart from a single issue, which I can't find a solution for. This only applies to the non-flying second PC which shows the map whilst utilising the other PC for flying. The flying PC displays hard runways when "Show airports with hard runways on map" but I cannot get them to display on the second non-flying display. Any help to solve this minor issue would be highly appreciated! Thanks.

Hi Alex, Since two days I get a strange error when I zoom in deeply in Little Navmap's OpenStreetMap view. The error message reads: "Contact [User; The DJT] if you want to maintain OSMdb and/or the wmflabs' OSM tiles server". This message only occurs in OpenStreetMap view. Is this a known error and if so, how can I resolve this issue, please?

Hi, as the title suggests, when export XP11's .fms format, it CAN be read by XP11's default FMC, or by some add-ons like ASXP, Zibo737 and Toliss Airbus, however, the iniSimulation's A300/310 couldn't read it and shows no company route when try to enter one, however if the .fms is download on simbrief, into the same folder, it reads fine.

I just updated to prepar3d v5.3 HF2 and now get this text on the worldmap. Reloading the scenery library did not solve it. Otherwise everything seems to work just fine

That's probably the wrong title but I'm wondering if there is a setting that controls the amount ? of airports displayed at any specific map zoom level. I find that I have to zoom in quite close to see an airport so that I cannot get a good image of what's nearby and when I zoom out to get a better view of the area, the airport disappears. Thanx, Vic

Is there any way of removing my old flight tracks from the map and elevation windows in LNM without having to do a complete reset? I've done the reset option a couple of times to 'clear the field' as it were but, surely their must be a way of removing old flight tracks without doing this? Also, I often fly to or out of Blackbushe AP (EGLK) in the UK as it used to be my home airport in my PPL days. I notice that within LNM, the field elevation is stated to be 1066ft (which would make it the highest point in southeast UK!!). The actual field elevation is about 100m (320ft.) so the info given is obviously incorrect. How can this be rectified? (Just a thought: when the fi…