Little Navmap | Little Navconnect | Little Logbook Support Forum

Greetings all, Sometimes, I want to build a flight plan that is basically a sightseeing trip so I use LNM to build it with waypoints and then export is as .fms for xplane. I've been doing this for years on the 530 with no issues. I could even modify it in xplane and reload in LNM with no issues. Recently, I've been trying to learn the G1000 better but I'm having an issue with the flight plans. If I build a plan in LNM and export to Xplane as .fms, no issues. The problem occurs if I modify the plan, save it in the G1000 under the new name it creates and try and reload it from Xplane to LNM. The plan remains fine in Xplane but in LNM, all of the waypoints are red and …

Hello... I use Traffic Global for my AI traffic, is there any way to get Traffic Globals AI aircraft to show up in LNM?

Since the last update I have not been able to load a flight plan into Active Sky X. The error says unable to parse. Generally this happens when an airport is not in ASXP, but not in this case. When I do it manually in ASXP it creates a flight plan ok. Anyone else had this problem?

Hi, sorry if this has been discussed before, but I'm having trouble picking my departure runway in LNM. I choose the RWY from the "Flight Plan" -> "Select a Starting Position for Departure" menu option and it appears that everything is working, but when I export the FP to FS2020 PLN format and load it up in the sim. It always starts me at a different RWY. Am I doing something wrong? Missing a step maybe? The airport is CYHU and the RWY I would like to use is 28. But for some reason it insists on starting me off on RWY 28R. Other than the departure position, the rest of the flight plan works flawlessly. Any advice would be appreciated. Thank …

If I click on an airport, the procedures window does open. I use LNM on my left screen (sim in the middle) and Airport information (etc) at my right screen. So if I click on an airport, I can read all informations on the right. Unfortunately it also opens the procedure window which I do not need most of the time. Is there any setting, I can avoid this behave? I know, that I can right click and use the sub menu, but thats an extra step. I simply want to click on an airport and get the info shown, without that the proc window opens. many thx!! Günter

It's not a big but. I wish the maps had an option to turn on a weather radar overlay. Would be so cool to see where the thundercells are located. Plus would be cool to see where the MSFS aircraft is located during multiplayer. But this app has nearly everything you could ever want. And I have used all the other payware and freeware flight planners for the past decade.

Hello, I'd like to use LNM with my StreamDeck and control it via the LNM shortcuts. Unfortunately this would mean, I always have to make KNM the active window, press the SD button to send the shortcut and then go back to the previous active program (sim mainly). (If anyone wonders, I have 3 screens with sim in the middle, that is why I could use LNM during flight) Is there any batch or other tool which could be run before executing the shortcut to make LNM the active window? or ay other idea to solve this? many thanks Günter

Anyone know if there is any plan to make LNM available in VR for MSFS 2020 or if there is a program already out there, could I have the details. Thank You

Hello, today I was planning a flight and found out LNM is not recognizing the plane selected on MSFS2020, nothing has changed except navigraph data, no sim update, no LNM update, using 2.6.14 (it was working fine on july 19) now i got this message, any help is appreciated Airplane model does not match: Simulator "TT:ATCCOM.AC_MODEL_TBM9.0.text" ≠ Performance File "TBM9". Thx in advance, Rodrigo

Love this program, have the latest version for MSFS 2020 but I have one little problem with it I can't seem to solve. Whenever I click or double click on something in LittleNavMap it says the program is NOT RESPONDING for like 30 seconds then it starts working again. Very annoying. Anyone else have this problem or any possible fixes for it. Thanks for any help!

Will folks be able to run Little NavMap on their PC and connect to the sim on XBOX across the network?

Almost all my flights are online with Vatsim and when doing so I can see the Vatsim traffic shown in red. However, this also includes a Vatsim feed for my own aircraft. So I can see my own aircraft in real time as a yellow plane, but also the red Vatsim feed which is delayed. Is there any way to filter out my own Vatsim aircraft ? I use another product for my IFR flights and it has a facility which allows me to exclude the Vatsim for my own aircraft feed by inputting my callsign. If it's not possible, could this be considered for a future addition ? Thank you. Andrew

Hello, I use a 4K monitor and have the scaling at 175% Mostly everything in LNM looks good but I somehow managed to screw something up so the popup boxes (when i click on the main menu item, ie Tools) are very small. The only exception is when I click on the the Window menu item, the popup box is normal size How can I fix this?

I'm not a pilot - so it could just be that this is against convention. However, I'm wondering if it's possible to have a flight plan that has full stops at some intermediate airports? Right now, if it's possible - I can't figure out how to do it. I can add the intermediate stops, but it has no elevation changes and doesn't allow me to really plan a landing there (it kind of just treats them like flyover points or navaids). Generally, I kind of like planning out longer flights as a set of small hops for refueling, ...etc.

I have added a number of user waypoints essentially to mark reporting points for my VFR flights. While the waypoint itself is marked with a "pin" on the map, the text description on the map is coloured black which is quite difficult to see when using Google Sat map display. I have looked for an option to change the colour, but although there are options in Settings, I cannot see there is one for the user waypoint text. Is this possible ? Fairly new to LNM so still learning, but thank you for a great program. Andrew

So, I have Navigraph updating Little Navmap (via Navigraph FMS Data Manager) and I have Navigraph updating MSFS 2020 (via Navigraph Navdata Center). I also do not have any entries in the "Scenery Library Database" section in the LNM options. Based on the following "Important Notes" from LNM, am I doing something I shouldn't be doing? Or is there something else I should be doing? I'm using the latest versions of everything: LNM v2.6.14, MSFS v1.17.3.0, etc. and using AIRAC Cycle 2107.

Hello All, I've searched this forum and google to find a solution, but so far NO JOY! I recently tried using LittleNavMap for my X-Plane 11 online flying (PilotEdge & Vatsim) and love the program, however I have yet to figure out how in the world to get online traffic in my vicinity to appear on the map. That being said, it doesn't matter what program I use NO online traffic appears so It's not just a LittleNavMap issue. It doesn't work with Plan-G and no traffic appears on my Reality XP GTN 750 either. Is there a setting in X-Plane 11 I need to change for AI or Online traffic to appear in LittleNavMap? So far I've tried the following: Run LittleN…

Ever since updating to ver 2.6.14 I no longer see my plane. I made sure I have a Windows Security exception so that windows does not interfere. I've used several previous versions and have never had a problem with my plane not appearing on the map. All other functions seem to be working fine. Any suggestions?

Good day. Firstly, thank you for the absolutely fantastic LNM program. I've used it extensively for quite some time now. First with X-Plane and then later I started using it for MS Flight Simulator 2020. Question, and please forgive me if this has been answered already, if this is the case, please send me a link to a possible resolution. Using LNM for most airports is absolutely great. But I've noticed that a huge number of smaller airfields which are on the map, is not represented by a LNM airfield icon. So you cannot search for it or use it for Departures or Destinations. etc. Only by zooming in, you can see that there is an airport, but only on the map, not in L…

Hi, just found out that LNM will not load after windows 10 update last night. Is there anything I can check or change to make it load?

Hi, Might it be possible to add 'Top of Climb' information in the Simulator Aircraft progress tab. Information about 'Top of Descent' is useful once at cruise altitude, information about progress towards the top of climb is more useful initially - perhaps it could be ToC first, then change to ToD? It's a great piece of software, and I'm learning more about its features and capabilities each time I use it - thank you Alex. Regards, Martin

Hey guys whenever I use Navigraph as source for airspaces (Scenery Library -> Airspace Libraries -> Navigraph) I get those fake Class B or A around airports with the (Z) in the name. Is that a LNM problem interpreting Navigraph data, navigraph giving faulty information (so I'd need to post there) or just my error? If I switch to Simulator it will vanish. The Simulator is updated by Navigraph as well. Thanks for your help

I am trying the new 2.6.14 Little Navconnect on both an Android Tablet and a Windows Laptop. I use Firefox as my browser. The user manual has not yet been updated so I used the guidance provided in the release notes. I have a couple of questions .. What does the 'Here' button do ? When I press it nothing seems to happen !! I appreciate that I have to turn 'center is aircraft' OFF before I can pan about the map. This is logical !! It also seems that I have to switch it off before I can Zoom. This does not seem logical to me. Is this working as designed ? Trevor

(shortcut path)"C:\Users\Dad\Desktop\Little Navmap\littlenavmap.exe" --settings-directory ABarthel p3dv5 This is the path I made in the shortcut. When its run I get the LNM is already running error. What am I doing wrong. Thanks for your help.

Alex- Thanks for your continuing work on LNM. I'm sure this is a user problem, but I am simply unable to get the remote installation of LNM to read the MSFS database. Can you please help (I did search, but wasn't able to resolve). Sorry for being such a git! Ta- C