Little Navmap | Little Navconnect | Little Logbook Support Forum

I have been unable to update x-plane 11 data in littlenavmap on my remote pc for a while now because "load scenery library" is greyed out and therefore inactive. I compensated for the problem by importing the data from the simulation pc in appdata/ roaming/ Abarthel to the remote pc. For the weather I used ASXP. Now I have just switched to x-plane 12 for the real weather I need the weather information and the only solution is to use the weather data from x-plane 12 to littlanavmap on the remote pc. As for the position and data of the plane no problem, I even have the wind arrow. Here is the error message when I launch the application. Directory "G:/X-plane 12/ Out…

Good morning everyone. I'm new to this forum, so I apologize if my posts aren't directed to the right place. I'm working on flight planning with Little Navmap in connection with MSFS 2020. For the moment, I'm using single-engine touring aircraft, therefore with flights on low enroutes. One problem I have encountered is that of identifying the wps that I insert in the flight plan, I specify that normally I love to fly without the help of GPS, which for me takes away a lot of the charm and difficulty of flying. So I need to identify each WP, usually by radial and distance from a VOR, or intersection of two radials. For example, speaking of an eastern approach to Santander (…

I cannot seem to keep the rote description box in foreground when entrering a route. I noticed in the latest version fixes this was suppose to have been corrected. any ideas please? Michael.

Looks like it LNavMap does not read default scenery. Many default airports are not seen in map window and I can not create any flight because Not found msg

I am running win64. The google maps work in 2.87, and the dependent folders remain in ...AppData\Local\.marble\data\maps\earth. They still work in 2.87, but when I run in 2.88 they don't appear among the map options. I've tried deleting and replacing the google map files in the same directory. I appreciate any suggestions. Thanks.

Latitude and Longitude Coordinates for Flight Plans in Route Description. Hi I create a lot of irregular flight plans on little navmap for the msfs community and post them on flightsim.to. I have then been using the route description copying to clipboard and inserting into simbrief. This has mostly been successful for FBW a320neo and Headwind a339neo and other aircraft. However I have had no success with the Stable Salty B747 which currently cant use 11 letter format (development version can). The Salty Stable B747 requires a 5 (or 7) letter format. In the route descriptions latitude and longitude coordinates appear in a 11 letter format I need a method to …

Hello all, I was just wondering if there was a way to add helicopter routes (especially London heli routes) to Little navmap? It would make planning and talking on vatsim much easier

I have a problem with the Socata tbm930, which I've had before with the King Air 350, that when doing a IFR flight using little navmap, the plane climbs so far and stops when on interior view yet carries on as normal in exterior view. Can any one help??

Hello, Used Simbrief to create a flight plan from KSFO to KORD. I got this message upon importing: Nothing found for FYTTE7. Ignoring. No waypoint before airway Q122. Ignoring flight plan segment. Found airway Q122 instead of waypoint as first entry in en-route list. Ignoring. I went to Navigraph Charts software and FlightAware to check and FYTTE7 is still active. I used Navigraph FMS data manager to update LNM but still has the same problem. I didn't try to check the other errors yet. Anything I need to do to correct this? Thank you, Terry

I have noticed this lately and it asked if you click ok if you want to use this database or discard? https://imgur.com/fqevweA Thanks Alex BobM.

LNV exports the flight plan to MSFS 2020 as extension .PLN . The inflight MSFS loading of Flight Plans requires a plan with the extension .FLT . I have sent a request to Microsoft to permit an inflight load of the Flight Plan with the extension .FLT; but no reply so far. Sooooooo... Is there a way to export the Flight Plan to MSFS 2020 with the extension .FLT? NOTE: The loading or saving of Flight Plans via the MSFS 2020 "Globe" before flight start does permit both .PLN and .FLT, but that doesn't help me if I must restart the flight to get the results I want. Cheers! from DCA1212

Hej, efter installation 2.8.7, kan jeg ikke se mine venner fly (og han ikke mig). Før 2.8.7 intet problem steen.

Hello Alex, I don't know if it is too much asked or just impossible to implement, but a very very cool feature would be to "move" or change the parking position from the user aircraft from within Little NavMap. Do you understand what I'm thinking about? I'll give you an example: Going in LNM to EDDL airport view, zoom in to stand A3 and then for example with a right click the option "move user aircraft / simulator aircraft to this parking position" and after clicking p3d will load my plane exactly to this position. And then I go to EDDH stand 45, right click, move airplane to this location and .... P3d loads this parking position. Oh man that would be a dr…

I see most sim POIs in LNM except the wildlife ones don't show up. Both default Asobo, and 3rd party ones I've installed. Can anyone suggest what's going on?

Version 2.8.2 beta 64 bit A while ago I imported some POIs, shown as small yellow circle indicators, on the map. For the life of me I cannot figure out how to either 1) Not show these or 2) Remove them. Any pointers on how to accomplish this? Thanks.

Hi Alex, Is it possible that for VFR flight plan, you will supply the route with the Name for the User way points rather then the coordinates when exporting to IVAO/VATSIM. When flying online, you can't put something like "DCT YNN DCT 3943N02137E DCT 3957N02137E DCT". The YNN is fine (it's a VOR), but the rest is info that is not really acceptable by the online controllers (and for a reason :-)) . In this example, the preferred way is "DCT YNN DCT KALABANKA DCT KARPERO DCT". I would say, if it's a user waypoint and it has a name - use it. If not - the coordinate. Maybe flag that with an option "Use waypoints names for VFR flight plans". Thanks, …

I have got a new PC with Windows 11 and had to reinstall everything. Installed the latest version of MS FS 2020 and Little Navmap 2.8.7 (64 bit). Connection to MS FS seems to work, as the "Disconnect" button gets enabled after connecting, but the airplane does not show on the map. I followed all advices I found Googling but none makes a difference. Am I alone with this issue? Can someone suggest what could be wrong? I have used it in the former PC with Windows 10 and an older version of Navmap for years, without problems....

I want to set the default user aircraft icon to a helicopter instead of an airplane. How do I do that?

I have an Android tablet and an iPad and I would like to know if I can use Little NavMap in either of them to follow my flights in P3Dv5 of my main computer; and if possible ... how to do it. Thanks a lot J J Gómez Prieto IVAO 142928

After making a flight plan in Little Navmap for a roundtrip between 6 airports where the departure is also the destination my GTN750 starts always the reverse route. When I skip the destination as the same as the departure the GTN750 follows exactly the route. What can I do in LNV to avoid this problem?

Fresh install Win10, fresh install MSFS, fresh install LNM and I get this error when I try to connect to MSFS. "SimConnect not found. Missing the file "SimConnect.dll. Reinstall LNM or install FSX SP@ compatible version." Have tried reinstall. SimConnect.dll is in dll library. LNM also connects to MSFS initially to load scenery library.

Hi, is it possible to add option in menu to Import active flight plan from Simbrief ? Like Navigraph app do ? It is small feature but always faster than copy/paste flight plan 🙂 I know i am lazy 🙂

Hi Alex, I can't see the airports I bought via the market place on LNM due to encryption, is there a way for me to create a file to add this information or Is there a function to change airport icon manually in the app? seeing the yellow circle will be more than enough Thanks

Hello Alex, I have another little wish for a future version of LNM. It would be awesome, if I could see the "course to steer to the next waypoint" ..... .... next to my plane on the LNM-Map Display, like this: I think it would be useful to have the option to setup this here: there actually already is a "Steuerkurs", but its a different one. greetings and a healthy new year to everybody Burkhard

LNM Ver 2.8.7. with MSFS2020. Part way through the flight my airplane disappeared, seems that connection to the Sim was lost and I was not able to reconnect.