Little Navmap | Little Navconnect | Little Logbook Support Forum

Hello. Been using LNM for many years without issue, but recently I'm finding when on Vatsim or JoinFS, other traffic is not always visible. By that I mean I can be flying with others in a group flight, and we are all on my map, but a few minutes later, some or all of the other traffic no longer appears. I'm on version 2.8.10, MSFS and vPilot or JoinFS. I downloaded the maplayers.xml file and all traffic appears on the ground as you would expect. When I remove it, traffic on the ground SOMETIMES appears ? However, when I start LNM, the other traffic appears on the may initially, but then disappears after a second or two. I'm also finding airborne traffic …

Hi Alex, As a nearly new user I like this program very much!! Have tried many different programs before. I'm mostly flying GA aircraft. I'd like to have the transition altitude / transition level airport information added. This is useful to set the correct altimeter settings. Kindly regards, Jacob.

Probably a silly question, but... Sometimes I would like to fly the last half of a flight plan so I would like to somehow manually move the lnm magenta line to the half-way way point, fly my plane there and resume the flight plan following the magenta line. Is there a way to manually change the magenta line in lnm? Thanks

quick q: how can I quickly change the descent angle for a single flight? for example in the flight below it has decided the descent angle is -2.2 degrees. I would like this descent angle to be -4 degrees because of the mountains. Is there a button somewhere to simply change the descent?

Something happened yesterday that I think I've only seen once before ...a flight was proceeding normally after being exported from Little nav map and correctly imported into Microsoft flight simulator ...about halfway through the flight the flight path line that lay ahead of me disappeared.. I can still see terrain and other aircraft in my group around me but not the flight path line or waypoints ahead of me this was the same whether looking at the //42 flow VFR map or the simulator VFR map.. I'm wondering if this is more likely due to an 800 nm Flight Plan ( although there were only about 22 waypoints ) or because the destination airport in China zdpq seemed to some…

I realize this is a trivial ask, but if you ever have spare time, NM traveled would be a helpful addition to the flight plan grid. Ident Remarks Name Course °M Distance NM Remaining NM Leg Safe Alt. ft NM Traveled KRLD Richland 0 280 WP1 118 3.4 277 1500 3.4 WP2 109 0.3 276 1500 …

Great, I have added a few charts and created this github repo for anyone else to download / contribute. Happy to have this linked to wherever it will help people out. https://github.com/samturner3/Australian-Charts-kml Australian Charts for Little Navmap

Hello, I'm new with Little Navemap. Is it possible to export Flight Plan to PDF ? Thanks for help.

Hi there, there seem to be some sort of addon airports that seem to be ignored by LNM when reloading the scenery library. The ICAO code of these addons works perfectly in MSFS world map, so the addon itself ist obviously installed correctly. One example for a freeware helipad that LNM seems to ignore is this one: https://de.flightsim.to/file/54546/helipad-spital-la-chaux-de-fonds But there are also some others, too. In LNM there are no exclusions configured for folders that should not be loaded, also the path to the community folder is set correctly as most other addons l use load fine. As it is freeware there should also be no encryption problem. Why do these…

I do a lot of flight planning with Little Nav Map on my laptop where MSFS is not installed. I want this copy of LNM to be current with it's scenery library. Can I install MSFS here ( even though it may not do much more than launch), so LNM can connect and get fresh scenery ? Or is there a download of such a library I can retrieve. This laptop is fairly new with 16GB of memory but I definitely wouldn't want to use it for flights. I do have flight simulator X installed here -- is that scenery just as good?

Is there anyone who can help me and tell me if it is possible to insert an ILS into a flightplan and how to do so. I cannnot find it in the manual thanks

Hello all, I'm not sure if it's a user error or something else. When flight planning with Little Navmap all goes well until I try to program the flight plan into the aircraft, the departures, approaches, and arrivals do not match for the most part. I do have a subscription to the Navigraph and it's updated in Little Navmaps, I really would love to use Little Navmap but at this point, it's unusable in my case that is. For Example: Flying from KTLH - KMCN the ILS approach on Little Navmaps is IJBEW and this approach does not exist when programming into MCDU or any flight computer, and I get different choices. If someone can chime in on…

I remember there was an option that would make the map only show runways of a certain minumum length. I do remember using that option. I reset my map options and know how to hide empty airports or soft runways etc. but I can't for the life of me find that option which enables you to only show runways of a certain minimum length...! I looked in every menu and rightclicked everywhere but I just can't find it. I don't want to see runways shorter than 3200 ft but have no clue anymore how to get it done. Sooooooo annoying because I did it succesfully in the past! Anyone knows where that option is hidden?!

I am on MFS2020 and other players are as well and I see them in the air and on the ground but LNM doesn't show anything but my own aircraft Is there a setting to show the other planes on the ground in LNM

Have had this with MSFS SU10. LNM plans loaded into the sim get a leg to the North Pole added for some reason. Any ideas?

Hello, I like to use my Stream Deck to do as many things as I can, including switching map themes. I have a button programmed for each theme. I have one for each of the ten available keybinds (Ctrl-Alt-0 through 9) and then, for the additional maps, I have a button that walks through the key presses needed to drill down the menu system using only keys. So, to get to Thunderforest Atlas in my present list, my multi-action goes: Alt-V, T, T, T, T, Down, Down, Down, Down, Down, Down, Down, Down, Down, Down, Down, Down, Down, Return. It works, but takes forever and makes it impractical to switch to those additional maps mid-stream. Two things I'm wondering: Can …

Members 1 90 posts Location:canada Report post Posted just now hi im new here hope someone could help me.li go to the tutorial but i cant open it..i dont know how change to a lnmpln file any ideas appreciate any help rgds ken p3d ver 5.3 windows 11

Hi Alex Just wondering if it is possible to make the map transparent or is it on the to do list. It would be useful when taxing around an airport. Many thanks.

1.can we use little navmap to make a RNP approuch by ourselves. 2.how to draw arc route between two waypoint.(In order to creat acontinious turning) .

Hello! I searched FAQs and threads but do not see an answer, unless I have missed it. (I did see 2019 threads with the opposite problem; turned off but remained on). I have FIRs & UIRs enabled, but do not see them on the map as I have in the past. Can I ask for any suggestions or recommendations? Perhaps something I've overlooked? I'm glad to provide any additional info needed. I appreciate any info!! Best Regards, Mike System Info: Latest version of Little NavMap Win11 Pro Intel i9-13900K, 64GB DDR5, RTX 4090, Samsung 990Pro SSDs, dedicated MSFS system (no other sims/games/etc.) Simbrief/Navigraph installed …

I seem to have many duplicate Userpoints that have accumulated over the years. Is there an easy way to mange them - to delete them?

Any chance this fantastic utility is planned for update to handle MS2020?

Question 1 - I might have this wrong but I thought since SU10 for MSFS LNM has the ability to read encrypted marketplace addons? I've done a scenery scan and all I got this message at the end Found 12 warnings in 12 scenery entries when loading the scenery database Some files or scenery directories could not be read properly due to encrypted airport data or other issues. Scenery Title: Steam Encrypted add-on "asobo-airport-eddf-frankfurt" found. Add-on might not show up correctly. Scenery Title: Steam Encrypted add-on "asobo-airport-egll-heathrow" found. Add-on might not show up correctly. Scenery Title: Steam Encrypted add-on "asobo-airpor…

I had taken a break from FS from about mid December until mid March. I made sure everything was updated for all the addons, mods, etc for MSFS which included little nav map. I am now noticing that the gate/parking info showing on LNM is not matching what is actually in the AFCAD files for the addon airports. I do not recall this issue with the version of LNM I was running in December. All other programs (GSX and PF3 used mostly) are reading the files correctly, but LNM is not. For an example: I have downloaded a freeware KDTW from flightsim.to and rebuilt the scenery database in LNM. On arrival to KDTW, PF3 ATC instructs me to taxi to gate A54. I select gate A54 and …

New here and not an experienced MSFS user. Learned through internet about this fantastic program Little Navmap. Way beyond me I thought, until I saw the possibility to show my plane on this map when flying. That would be my dream come true. So I downloaded and installed Little Navmap 2.8.10 Have a fairly new computer using Win 11 And have MSFS 2020 When I in Little Navmap go to tools/connect to the flight simulator, I get in red a warning saying: Simconnect not found. Your Little Navmap installation is missing the file 'Simconnect.dll' And I cannot make this connection. I have checked that Simconnect.dll really is in the installed directory. Is the…