Little Navmap | Little Navconnect | Little Logbook Support Forum

X-Plane 11 with all the latest updates. I have just downloaded LittleNavMap but I get an error saying these files are missing. Despite this the "on board" weather conditions seem to be working in X Plane. That is to say I can change from dry and fine to raining and stormy in the program. Al

When I am at EGLL i see half the parking spots are gray and the others green. What is the significance of this distinction.

Hi there! I was updating the data base and the final report shows the following error "Message: readInt for file "E:/MSFS2020/MSFS ADD ONS/World/Europe/Spain/010000 Airports/Airports 04/010000 asobo-airport-lelc-murcia/scenery/lelc_msfs.bgl" failed. Reason: Read past file end (1)." Any ideas? Thanks!

Flying from KRNT to KFHR I used the CVV VOR. The heading that LNM gave me 3 miles out of KRNT RWY 34 to go 'to' the VOR was 319 M - however the heading shown on the flight plan at the VOR where the line intersects the VOR was 315 M. Which one is correct and why?

I can only presume that very few people like to fly the way I do as all the EFB's I've tried are full of features yet lack the simple interface I've been after since day one. So, I wrote my own, building on the LNM web server and the Openlayers mod. Basically this is for people who like old school dead reckoning and a little VOR/NDB. I don't want to see my plane on the map as that takes the fun out of trying to navigate myself. I do want a flight plan to remind me of the legs with direction/distance and expected duration. I also need a very simple stop watch that isn't too fiddly to start/stop. Not a big deal in 2D but a neat option has eluded me in VR. Also, being i…

I raised the issue of weather display in LNM at X-Plane.org. And I didn't get a satisfactory response. When we open LNM with a simulator on we see weather signs. Those small circles are varying from green to red. It was my assumption that LNM fetches flightsim data and displays signs that mean bad or good weather, in a broad sense. It looks however that some regions are correctly represented (USA, Scandinavia, Germany, Great Britain) while some airports' signs are simply irrelevant. Could you guys share your opinions regarding the weather display issue? Thank you.

Hello, I installed the latest version of LNM 2.8.12. My procedure: 1. Startin littlenav Connect 2. Starting MSFS Now on my other PC I can track the flight. But after sometimes 15 min, sometimes 45 min.Sudden CTD. In the dialog of SimNavConnect it says: Too many errors to show. In the logeventviewer it says the famous 0x0000005 code. Also tried the 2.6.x version. But same problem... Now wihout LNM Connect, no problems, yesterday, and the day before. a total of 8 hours flight, 5 landings. no problems. So im 100% sure its the LNM that cause the issue. I searched the internet but didnt came up with a resolution. I love the program v…

I've just opened LittleNavMap after a while of not using it but noticed that when I create a flight plan the top of climb and top of descent makers are not displayed on the route line or in the elevation profile. I'm using an aircraft performance file and there is no red warning message, so I'm not sure what is causing this. Any help appreciated. 🙂 https://drive.google.com/file/d/1uDYIoM7QbW21GI-R83c7KbzHAAk29Ts_/view?usp=sharing

Hi, I wonder if there is a possibility in LNMap whether 1956 propliner DC6b flights from Amsterdam to Cairo via Dusseldorf - Frankfurt - Vienna - Istanbul, for example, are possible to plan in 1 flight plan ? Guus.

Lots of approaches listed ending with a "(T)" (e.g.: Approach ILS31 (T)). What is the (T) for? Googled but couldn't find anything relevant. Thx.

Apologies if this has been asked, but I have scoured the manual too and can't find the answer. I'm trying to get back to online VATSIM flying and I used to use Flightsim Commander for navigation assistance. You could connect it to the autopilot and it would fly the planned route. Does LNM offer this function? If not how do you use it - just as a planner and moving map and then import plan to the Flight Sim FMC? I have tried FStramp and it seems to do what I want but wondered if LNM did something similar

Hello, I was following the pinned instructions to still be able to use the Stamin Terrain map and Malwarebytes is telling me this link is a Trojan: https://filetransfer.io/data-package/Oe1gNKee#link That has to be a false positive right? I really desperately want to be able to still use the Stamin map. It is the map I use 90% of the time for flight planning and I don't want to lose access to it.

When I right click an airport and select show airport info, the airport info->navaids shows info from an airport I used a few days ago. It will not refresh to the current selected airport. Main airport window appears to be ok, just the Navaids tab that is not updating.

Hello, i use LNM with the Moving Map. Now it shows two Planes like in the Picture. I only want have one Plane. Please Help

Hello, i wanted to land in Frankfurt Main (EDDF). I created a FlightPlan with Simbrief and wanted to use Little Nav Map to over look the Route. I must add the STAR in Little NavMap and i noticed, that there are not the STAR that i was looking. I was looking for the ROLI4A Arrival but there are only the ROLI25S, ROLI2g, ROLI2b, ROLI2L. What does it mean and what is the rhight one. Please Help! Thanks!

Hope someone can tell me why my keys just keep beeping at after I start a new flight plan etc. I get no reaction from LNM to the keys being pressed and have to use Task Master to close the program.

Hello, I remember being able to load the MSFS library. I remember seeing the warning for the encrypted content but the process will finish regardless. Now I get this error: https://imgur.com/a/xOtFbFD

Hi all! Is there anyway to display airspace type/name and freq. in the map (i.e. as you would do for airports)? Thanks!

I'm running the most recent version of LNM and I only noticed that the 3rd party airport is not displayed on the map because it has different gate numbers than the MSFS stock airport. The map display is definitely the stock MSFS airport, as I checked some of the other features. The 3rd party airport shows up correctly in MSFS. Here's what LNM sees: The add-on airport viability button has no impact on what's displayed. I've also rescanned the scenery library and rebooted to no avail. Any thoughts? EDIT: I disabled World of Jetways KALB.bgl, so it wasn't a LNM issue at all.

Hi! I wanted to download littlenavmap application because I bought a new ssd drive from Samsung and transferred all the files from the old c to the new one. I had a lot of memory on the last disk f, but I replaced it and disk f became a reserved system, and when I download application, it downloads to me a disk f and I want it to download to disk c help

As far as I can see, there is no indication whether a particular userpoint type is selected or not. Is that the case or am I missing something? Thanks.

Good day to all, LNM works wonderfull with MSFS 2020 and FSLTL injection. LNM what a great iece of software !! Only wish is that instead of showing Regfistration of Airplane on map, it migth shoe Flight Nr wich is the ID that MSFS 2020 ATC uses. It would be a nice thing to have for easier identification on map while listening to ATC. Thank you very much. Greatings Francisco Chile

W10; P3Dv5.3; Active Sky; Active Sky Cloud Art; Go-Flight modules; Radar Contact RC4; Skytrack (VA tracking); LNMap 2.8.12; Navigraph 2309. Intermittent incorrect labels! Could this issue be related to the order in which a flight is loaded/started? My routine is to run P3D; set Honeycomb options; run Go-Flight controls; run ASky & Cloud Art; run LNM (plan built on previous day); run SkyTrack; run RC4. Variations in this routine also show intermittent incorrect labels - it is not consistent! I have set 'user aircraft labels' to show aircraft reg; airline; call-sign; height; height above ground. The height information and registrration is not an issu…

I have downloaded little Nav Map and am able to show my plane on the runway of a selected Airport in Little Nav Map and MSFS but am not able to find it on the pulldown toolbar in my plane to operate in my cockpit. I have tried following the direction in the manual for Little NAV connect but not sure I made it through that correctly. I am not unzipping anything that I download, but simply opening the download and I get the full content of little Nav maps and understood that I did not have to separately download Nav connect. I typically put something in Community to work with my plane but saw directions not to do that. Any suggestions/advice would be appreciated. …

Hi Alex, I'm trying to insert new user points and get unique constraint exception. looks like for some reason it fails on the "abeam kea" ident. But that does not exist as user point, there is one similar in Australia while I'm trying to insert one in Greece. Here, try to import first the https://mega.nz/file/VXZlWI6Q#RaLxx9Iz9VhEF-nA3AVwQhVIm2mcSTM2aapnjDX_bhg Then this one https://mega.nz/file/QDIzyITQ#A_vdusZ9Fco59D38Xuzxa6-SY8O0vStapcAHDDydQ-k If you found a bug 🙂 and you're already in the fixing part, maybe you can also provide the functionality of ignoring import of user waypoints that exists on the same coordinates with the same type (VRP for ex…