Little Navmap | Little Navconnect | Little Logbook Support Forum

Hi, I am loading automatically the Airracs from Navigraph into Little Navmap. I have one pb with LEBL where the heading of the rwy has changed for magnetic field reasons in such a way that the rwy names changed. Up to now my system was set on SCENERY LIBRARY/ NAVIGRAPH AIRRAC / USE NAVIGRAPH FOR NAVAIDS AND PROCEDURES With this set up the new rwy heading was correctly shown in the info written on the green ILS feather on the map but the rwy name was still 07 and not changed to 06. When I changed the set up to SCENERY LIBRARY/ NAVIGRAPH AIRRAC / USE NAVIGRAPH FOR ALL FEATURES the name of the rwy was adjusted to 06 which is fine BUT I have now a dupplic…

I have been trying for a long time to export a flight, complete with approach ILS, runway, selections, etc. into Microsoft flight simulator. I can’t seem to do it. I keep getting that warning then I unselect the options then I don’t get the approach. If I leave the options selected, I still don’t get the approach. Is there a simple way to do this?

Hi, Up to the last 4 days, Little Navmap has been performing perfectly. However, since then, I start it up and nothing happens. If I check in Windows Task Manager, it shows Little Navmap running as a background process. When I click on Details in Task Manager, it then shows Little Navmap under the UAC virtualisation column as Disabled. I have un-installed LM and then re-installed it. It worked the first time, but since them, the same as detailed above has occurred. May I ask if anyone knows how to solve this? Best regards, Peter

First of all, thank you for an amazing product that I would be completely lost without. My question: Do users have the ability to add/assign keybinds or reassign existing keybinds for the map themes? Or rather, could they? The reason I ask is because it borks all of my Stream Deck buttons every time the themes list gets updated and the keybinds get reassigned. (Based on a previous forum post, it seems like these keybinds were added specifically to support Stream Deck use in the first place.) It seemed like previous LNM versions just assigned the keybinds to the first maps alphabetically. With that in place, I was able to get the various Google Maps into the…

Hi everyone, new to LittleNavMaps. I am trying to find a way to see what is ground elevation is particular point on the map, but unfortunately I don't see a way to do so. When creating a flight plan, inside the flight plan elevation profile i do see the ground altitude when I hover over the point in that window, but I don't see any option to see elevation of particular coordinate without create a flight plan on that coordinate. I believe there is a solution for that by I didn't find anything in the setting. Is there a way to see ground elevation on the map/when hovering/pressing on the map?

Hi, I use the commandline option --flight-plan to load flight plans into LNM. As soon as the plan is loaded LNM changes the plan. I do not know why and what, but I see the asterisk on top, and upon loading another flightplan via commandline option, the loading process is blocked by the messagen "Flight plan has been changed. Save changes?" How can I avoid either the automatic plan change or the save message? I want to use LNM as viewer only on that particular computer. But I am permanently blocked from loading another plan by this message. THX Hans

Hello, I think I'm doing something wrong, after I have completed a flight I try to merge the aircraft performance by selecting: Aircraft - Merge Collected Aircraft Performance The problem I have is that all the " new values" are zero value. Could anyone advise what I'm doing wrong please? Thanks in advance Dave

Hi guys, I could not find in forum or figure out in LNM, how to create my own toolbars, just with a selection of some buttons I need and want to see in my specific order. THX and best regards Hans

I have just downloaded the latest LNM update(3.0.6) and when I try to install it it says it is not a recognised MS app store program and so I can't download it? I have not had this problem before. I am running the XBOX 40th anniversary edition of MSFS2020.

Hello, I've been stuggling a bit to find an easy way to use LNM alternatively between XP11 and XP12 until I found the "multiple installations" section of the manual which seems to be exactly what I need. It seems though that the option is not working currently (tested on both 3.0.5 and 3.0.6). Is that a bug, or am I doing something wrong ? Thanks

Hi. Is there any way to add a VOR to the data base where LNM gets that info? It's called YXH in Alberta Canada. P3D finds it in a flight plan but when you load the plan into LNM it says it is an unknown point. Thanks Jim CYWG

I set that 10,000 points to , say , 1,000 and it reverts to 10,000 every time

g'day all. happy Easter. for xplane 11 - why does my Airac cycle show 2402 when i have updated the files in Custom Data to 2403 ? navigraph data has also been updated and shows as Airac Cycle 2403 thanks

I don't see any traffic on the map and the options in the view menu to enable traffic are grayed out. I tried flying over KLAX, a busy airport with lots of live traffic. I see the traffic on the G1000, but not in LNM. I just downloaded and am using the the newest version. The map shows my current location and my plane icon, and I disconnected and reconnected to MSFS. I looked at the options but didn't notice anything. How do I turn on traffic on the map and enable the view options?

Hi, Also from the manual "The departure and arrival runways as well as the related waypoints are exported as custom waypoints (or coordinates) in some flight plan formats like MSFS PLN, X-Plane FMS and others.". What is it "MSFS PLN"? Does it refer to MSFS 2020 only or also older PLN format (FSX and P3D?). Because I noticed that export in FSX also has these waypoints added.... which gives some problem is using the default ATC system.... Is this intended or a bug? And if it is intended, what's the rationale behind? Can the export be excluded? In particolar I believe the one creating the biggest problems with ATC is the 1st one, at the runway head. That's because …

MSFS uses * ’ " as coordinates format when generating a flight plan file (*.PLN), whereas all others including LNM use ° ’ ". A flight plan that has ° ’ " can be loaded by MSFS, but one or more waypoints will be translated into wrong coordinates (thousands of miles away from the correct waypoint) more often than not. While we are waiting for MSFS developers to fix the bug, we can avoid it by replacing ° with * using a text editor. For example, you have to change 11° 22’ 33" to 11* 22’ 33" before loading it into MSFS. This problem has been known for years, but surprisingly I cannot see many people complaining about it. So I wonder -- Is there anyone who uses LNM …

I created a plan from KCNM to KDVT with KPHX as alternate. The plan generates fine in Simbrief but when loaded into LNM, the flight plan destination is changed to the alternate, KPHX. If I eliminate the alternate in Simbrief, the plan loads correctly into LNM. Any idea what's happening here?

Dear LNM users. Ive searched the settings but cant seem to find the line width feature. How can I increase the width of each line so I can read the FP?

I have the latest update and when i am flying I don't see the city names. I cannot select this on the tools at the top of the program?

Hi, Is it possible to add Bing Maps to the LNM map providers as G-Plan has? Thanks. Edit: Please ignore, found Alex's reply about this in another thread.

Hi, can`t see my friend after 3.0.5 options whazzup file URL test....and it says.... "downloaded succesfully but the file does not look like a whazzup.txt file" ONE OF THE SECTIONS !GENERAL AND/OR !CLIENTS IS MISSING (added) Steen.

Hello, I am using LNM 3.0.5 and I am facing a problem when I do a no precision approach with HDG. LNM gives me a runway heading of -1° compared to the official map; example : LFNM card RWY 04 = 43° and RWY 22 = 223° LNM gives me RWY 04 = 42° and RWY 22 = 222° I'm using MSFS 2020 and the LNM library is up to date on MSFS. I think I missed part of the settings, I would be grateful if you could help me, thank you in advance

Good day, I've installed 3.0.5 version in my remote notebook and every time I open it it shows a message about "scenery library database was created using a previous version...". So, as advised to reload the library, I agreed to open the dialog window, but then this happens: 1 - I cannot fill the combo field "Simulator:" because the combo is empty. 2 - It does not accept the path for "Flight Simulator Base Path:" because the next field "Scenery Configuration File:" is completely disabled, i.e., I cannot select it. Is this a problem with the new version or am I missing something? FYI, despite this problem, the program is working normally. P3Dv5.4. …

Wäre es machbar eine Option setzen zu können mit der die rausgelöste Map dann AlwaysOnTop wäre. Ich benutze die vor allem auch um auf Vatsim/Unicom direkter zu sehen was rundherum noch so fliegt. Ich kann sie mir zwar hochholen, muss dazu aber auf dem zweiten Bildschirm auf LNM klicken.

There is a problem trying to reload a new flight plan created after 3.0.4. I can reload it from an .lnmpln but not as a.pln - you get an error message see attached - https://photos.app.goo.gl/xNeUb2s2nmwwHS3g8