Little Navmap | Little Navconnect | Little Logbook Support Forum

I am trying to learn how to apply speed and altitude to a waypoint/NAVAID. I was heading to KOSH and was trying to setup the WARBIRD approach into RW27. This is my plan: KCIN MCW VPPLK 4345N08907W VPGRN/N0135F023 VPRIP/N0135F023 WINNE 4351N08827W VPWAR FIGAD/N0117F018 4359N08833W KOSH/PRIMO.R27 I get an error message saying: Ignoring speed and altitude at waypoint VPGRN. Ignoring speed and altitude at waypoint VPRIP. Ignoring speed and altitude at waypoint FIGAD. What am I doing wrong?

So still no new program in stedt of transmitter ???? Steen.

W10; P3Dv5+; LNM v3.08: After creating the FP I am receiving a 'Red' error message: Fuel Report: Found problems in FP, click here for details. Problems on tab 'Fuel Report'. Invalid values for aircraft type. The details relate to a C172 that I once attempted to create a profile for but have never used! I cannot see how to remove this red warning without uninstalling LNM and starting all over again😞. I (now) only use large jets in P3D and the earlier C172 episode is now irrelevant. Is there a 'simple' method to remove/not see the red warning? Still a super piece of software ~~~ should have mentioned before how useful the green banana…

Hello, I recently added some new airports to my sim, P3Dv5 so I opened up LNM and re-loaded the scenery library and to my surprise, instead of the total number of airports I had in the sim increasing, it decreased by like 40 airports or so. A month later I tried adding even more airports to my sim, re-loaded the library and this time I lost another 50 airports. All of my 3rd party airports and scenery that contains airports (like Orbx) seem to be properly installed as far as I can tell so I don't know what happened. This has me completely baffled, I don't understand how this is happening and I have no idea how to fix it. Not all of my airports use xml files, m…

Hello, is it possible to hide all labels quickly on the map? I only want to see the flight plan line and my plane, no labels of any kind to declutter the map even when zoomed in. Is it possible?

Hi Folks, I have come from the XPlane side of simming and am having a few issues using MSFS. The major problem that is driving me mad is LittleNavMap will not connect to MSFS - I have been trying to solve this for the past 2 YEARS!!! I am using a pretty new computer ( 1 year old) running Win 11. In the control panel I find a file name Microsoft Flight Simulator SimConnect Client v10.0.61259.0 - which has obviously been installed with MSFS. In the directory for LittleNavMap is a folder Little NavConnect which also contains a SimConnect.dll file. When I use LNVMP tools menu to connect to MSFS the status bar at the bottom of LNMVP says it is con…

I created a low level IFR flight-plan using LNM and I load the flightplan in MSFS via the more>load flight plan and although MSFS world map shows the flight plan correctly the flightplan on the MFD seems to display a return flight. Please view the following screen images and advise if I am doing something incorrectly or just don't understand something. Thanks

Hi..., After the last MSFS update, "other" aircraft (AI, real, etc) are (mostly) not being displayed on the LNMP screen... Is there a setting or fix available? Thanks, Rob

cant put pilot id in littlenavmap when i export a flight from simbrief ..its for p3d version 5.6 i cant see any where to put it in any help thanks rgds ken hanson cyyc

Just fired up LNM portable on a new PC and the scale is much too large. How do I make all of the icons and windows smaller and more proportional for the screen size? Thanks!

Why are the Window Options not saved in a "New" Window layout? Example: I save several options (text size, line color, text background, line size etc) in the map, and save as a new Window layout, then change to a different layout and all of the same options are saved in the 'other' layout as well plus all other layouts I have saved! Is it possible to have different options in different Window Layouts rather than all the same options in ALL layouts? Thanks for any and all responses!

Hello, Is it necessary to reload the scenery database every time I install new scenery? For example, Do I need to copy the database files via USB to the remote littlenavmap install every time new scenery is installed? or will this automatically be shared over the remote connection?

Flying from Edinburgh to Reykjavik on an A20N, and Little NavMap is warning me that it's going to ignore the speed and altitude at two waypoints where SimBrief has me flying FL380 instead of the starting FL240, and LNM instead has the whole flight happening at FL240, without explaining why it's ignoring those instructions. SimBrief: EGPH/24 N0366F240 GOSA1C GOSAM DCT GOW L602 BRUCE/N0446F380 DCT GOMUP/M076F380 DCT BREKI DCT BASLU BASL2K BIKF/19 LNM: Flight successfully downloaded. Reading of route description successful. Ignoring speed and altitude at waypoint BRUCE. Ignoring speed and altitude at waypoint GOMUP. Flight plan from Edinburgh (EGPH) to Kefla…

Hi, his might have been already discussed, but I cannot find anymore the topic. Is it there a way to control when to download the weather (like a "download now" button) and then stop updating the weather? This is useful in the following scenario: for free-time limitation, i often plan the flight way before (sometimes 1-2 days) the execution. That implies that i download the weather in my weather program (FSGRW), plan the flight accordingly, compute performance, and then the next time i have a gap in my agenda I execute the planned flight. But at that point LNM has updated the weather and i cannot relay anymore on what's displayed. If there is a way to download…

How can I remove the yellow label which is attached to my yellow aircraft. It is so large it often covers up some map detail.

Hello, I have a question regarding the use of external scripts in LittleNavMap: Is it possible to use external scripts to make the creation of flight plans easier? I'm talking about the fact that I have several user points and want to insert them into the flight plan several times in a row in the same sequence. Or is it possible to add user-specific procedures that can be inserted into the flight plan several times in a row? Thank you in advance.

Hi Alex, Setup to connect to IVAO, the "select centers and other spaces" is ticked to "all" , though it's grayed out. (Online flying it on). There is an active tower in IVAO, but it doesn't appear on the map. Thanks, Doron.

Now that SayIntentions AI program has enabled a user to create an accurate taxi map of airports, I was wondering it LNM has any thoughts on developing an interface with SI that will allow those taxi maps to be used instead of the default ASOBO information - which is usually inaccurate.

little nav map zooms in to a preferred scale when you fly, if you manually zoom in to read something particular, shortly after the maps will zoom back to its preferred scale. during landing the LNM zoom in to a very small scale, this particular zooming is demanding for the graphics card and lead to stuttering in msfs at short final, and result in crash. what is the setting to prevent this auto zoom. The scale that a user scroll in to is the scale the map should show until changed by the user.

Hi, first of all, RESPECT, for this awesome tool, simply the best for MSFS. There's any way to show in the aircraft information selected thru the map the Containers Id shown in MSFS? Thx in advanced.

Hi there Alex.. I am using LNM v3.0.6 and have a slight problem that has not been experienced before. When I create user created waypoints or create an "on map" range ring the intended coordinates care some 69 nm off to the east. IE: I try to create a user point at location 52 20.75, 0 56.58 >> this results in a user point created but at location 52 20.80, 0 56.60 which is 69 miles to the east. Same thing occurs when trying to add a range ring at a location.. it is created but 60-59 miles to the east. No matter what the display map format is being used. (IE: Google Satellite map). (And No external navdata being used) I have a fresh scen…

Hi all, is there the possibility to print the Flight Plan ? ... I am a "novice" but I do not find this option thank you

I was running LNM 2.8.12 for months and everything was fine. I decided to check out the new beta, so I updated to 3.0.3. After the update, the web view looks like the screenshot below. (latest FF on Win11). Checking the browser console, it's full of 404s on the images, css, js. But those files ARE in the webroot folder on disk. I checked my firewall and nothing seems to be blocked. I've disabled all my browser plugins, and tried 3 different browsers (FF, Chrome, Edge). Nothing works. I tried downgrading to 3.0.2. Same issue. I tried "legacy ui" and without. No fix. When I downgrade to 2.8.12, everything works fine again. ] Any help appr…

I'm trying to use the custom aircraft icons from the GitHub, I've extracted them to C:\Users\danie\AppData\Roaming\ABarthel but I can't get them to show up. All the Online Vatsim aircraft still look like Cessna's, when I would like them to look more like jets (or ideally a mix of both) Am I doing something wrong? Any help would be appreciated

Is it possible to adjust the level at which VATSIM controllers/centres are displayed on the map. I have to zoom in to the map a certain distance before they appear. Is it possible to alter that zoom level to be further out at which they appear?