Little Navmap | Little Navconnect | Little Logbook Support Forum

Many times when I create a flight plan, the elevation profile does not function. It just shows 0 ft for all points on the flight path. Any help on this?

For u guys thats use L NavMap, and loaded the offline global elevation files provided on website. Theres acctualy an alternative for download this elevation data, from other place that not its from "NOAA"? Im asking because i was planning an flight, and when i measured a manual waypoint ft to insert on flight plan, the LNavMap say 700fts to it, but when i come to the flight in xplane,i crashed on a mountain on this point, a mountain of 2500 ft. I Googled this place and the Google said me the right parameter. So i was chocked with it. The L NavMap read a wrong value to me. I tried different measures on the world and the others are right,just that one i see this readin…

Hi, Is there a way to show the airspace altitudes on the elevation profile so you can see the atc control zones altitude on your flight plan as you would fly through or how to avoid? Thanks

Hello, I am flying military sorties with C160. My FPL prepared in LNM is a low level flight with waypoints. I have exported it in MSFS FPL. When I load that FPL within MSFS, only the DEP and ARR bases are associated and none of my waypoints. One WP has been created in the the African Atlantique ocean coastline... I used to import FPL before and that was working, not this time... Any idea why? Thanks for assistance Bruno

Hello, I recently tried to do a flight from KSFO to KLAX. I made the flight plan, chose my starting gate at KSFO and saved it so I could load it with the P3D flight planner. When the flight loaded, it parked my aircraft in the middle of the runway, I then realized it did that because the parking gate I chose does not exist in the sim. It seems LNM is showing an airport layout for KSFO that does not exist. In LNM it shows KSFO as an addon airport (with the yellow ring around it) but I do not have an addon version of KSFO so I don't understand how that could be, unless it's an airport that was updated by Orbx (I have Pacific Northwest which covers KSFO area and I ha…

Hallo Alex, folgende Situation: LittleNavMap Scenery Library stammt vom WIN7 FSX Rechner (auf dem FSX und LNM instralliert ist) Jetzt mit neuem Laptop WIN11 möchte ich diese SceneryLib auf eine LNM (remote) Installation (FSX nicht installiert) übertragen. Geht nicht, Fehlermeldung: Format von little_navmap_fsx.sqlite passt nicht (o.ä. Formulierung, mit selbem Sinngehalt) Gibt es eine Möglichkeit die "alte" little_navmap_fsx.sqlite auf den WIN11 Laptop zu implementieren, ohne FSX (ist nach jahrelanger Nutzung zu einem "File-Gebirge" mutiert) auch dort zu installieren? Für eine Antwort von Dir, Alex - oder einem anderen Berufenen - wäre i…

Asking simply because I like to use LNM to help me taxi, and it would be helpful to have the map orient this way. I'm guessing no, because the docs don't say anything, but thought I'd ask because a search also doesn't turn up anyone asking. Thanks!

This is the TINIEST bugette ever but as title states. If you create new FP then SAVE AS LNM flt plan the title bar still shows FP with no name. If you open an existing flight plan and SAVE AS new plan AFTER saving the old plan name still shows in title bar. This produced some minor confusion when I edited a major plan and saved it as TEMP to experiment then was reluctant to SAVE changes to it as the original plan name still showed in title. All saving itself is working fine. If after SAVE AS you open the new file THEN its correct name will be displayed top of LNM window.

Today I created a flight to KLUK. However, LNM said there was an error in the runway assignments. Looking at the airport diagram, I see that runways 21R/3R are no longer on the diagram but still show up in LNM. After posting the above, I checked and found that the runway was closed on July 1, 2024.

Hi Alex, I am a recent user of the RXP GNS530 V2 and I have an issue with the corresponding Garmin export template. Using the option "with user defined waypoint" has the drawback that arrival airport is not recognized as such. And don't allow easy insertion of arrival proc in the GPS. Using the other one, as anticipated, creates lockd waypoint when loading the FLP. I understand the problem for waypoint and AIRAC cycles, but I am surprised that this could also happen for airports... Any chance that airports stay recognized as such in the option "with user defined waypoint" ? Thanks Gérard

I am using a freeware add-on for KLEX. I've noticed that I get very different results in the LNM parking map if I add the Community folder in the database options dialog. With the Community folder specified I appear to only get those parking spots that are included in the add-on. Without it, I appear to get only the default parking spots for KLEX. Also, 'With Community folder' contains more entries in Data Sources than the without. It appears that LNM searches the Community folder by default, but I get very different results in the add folder. Interestingly, both MSFS and Flow Pro's Portal feature pick up on the correct parking spots. Any thoughts on why th…

After installing 3.0.9 I am unable to connect to X-plane via remote computer, get this error message: "Error in server connection. Connection refused (0) Will try to reconnect." Has been working great. XP12.1.1 LNM 3.0.9 64 bit XPConnect 3.0.6 64 bit FIXED -Wrong port issue. Duh.

It´s possible to delete the Aircraft Tail of your last flight? Another question, i forgot to leave LNM minimiced in my last flight, is possible to select the departure airport and destination, and then set that line as aircraft tail in order to don´t repeat the flight? Cheers

Hi, Since World Update 17, LNM has been crashing for me... I have done all the usual troubleshooting... and even performed a clean re-install... I have the "little_navmap_crashreport.zip" package but need to know where to send it. This is the first time I have ever had LNM crash on me, which is not normal as this is a very stable software, and feel I know how to use it pretty well... Please advise.

I think Asobo must have changed something in airport DB coding as the following Heliports are not being picked up by LNM even though they still exist in the sim. (They also deleted a number of fictional POI idents) ident name 4CA1 US Bank Tower Helipad EGLT The Needles Lighthouse Helipad KWHH White House Helipad LIBH Lingotto Building Helipad NK80 Rainbow Air Incorporated Heliport OBAR Burj Al Arab VVBF Bitexco Financial Tower Helipad WMMT Menara Telekom Tower Helipad

Hey Alex, sorry to mention this again. There may still be something wrong with the weather download. I do get old weather (METAR) very often lately (2h or older). When at the same time the API is totally up to date, when requesting some weather directly (e.g. https://aviationweather.gov/api/data/metar?hours=0&ids=eddf) Just to let you know... Best wishes

First an apology if I have missed this somewhere either in the forums or in the manual. I'm certain I'm overlooking something that is probably simple, but am stumped (though I may be blind as well) Last night I did a short VFR flight from KAST to a grass strip by Mount St Helens. As this is my first time back in flight sim in a year I was modifying aircraft performance but also used LNM to create the flight plan. As I fly in VR, I checked in periodically and saw that LNM was creating a flight trail for my plan progress for the flight path itself but not for my elevation. I continued flying and when I was done, I looked at the settings which seemed logical bu…

Hello Everybody, I just began a Youtube Channel where I reconstitute air accidents. I was wondering if it was possible to create animations in LNM ? For example "this flight was schedule from xyz to xyz" and create a quick and good looking animation of the flight ? I looked for it but I didn't find anything Waiting for your response ! 🙂 Best Regards

With the release of Avia Planner ( a cheaper alternative to Navigraph) will LNM support the NavDataPro in the future ? Thanks

Hello, My question is not directly related to the software which work perfectly. I have reinstalled it on a new computer and the font of the whole software is not as expected and would like to change it. Could someone explain how to change this as I did not find any option in LNM and dont know how to do from Windows that I suspect to be the origin. Thanks in advance Bruno

I seem unable to display ILS green feathers with v.3.0.8. Inner markers show up when I click the feather button, but not the feathers themselves. Any help appreciated.

I recently had to uninstall MSFS and reinstall. In doing this I forgot to copy all the PLN flight plans and have now lost them all. Is there a way to convert the lnmpln files to pln? This would save a lot of time if possible.

With the latest BAe-146 update, it now needs the file plans to be put in its own folder. How can I add this new folder as an additional export option? It needs to go in: X:\<addonDirectory>\Aircraft\JustFlight BAE-146\justflight-aircraft-146\Work\JustFlight\FlightPlans

As the title states I have the Raspberry Pi Desktop for PC installed on an older i5 Intel laptop. Why? Because I have a Raspberry Pi and like having similar desktops. 🙂 I've tried installing the Linux Debian Installation package, but get a 'One of the selected packages failed to install properly' error. Perhaps it's not possible, but worth a try. Thanks..

Sorry if this has been asked before. I am importing a simbrief flight plan & when I do it says the following navaids & procedures are not found. BLAQQ, RADYR2 & ANJLL4. They are in MSFS 2020. I have reloaded the sims scenery data base & Navigraph is up to date. Any suggestions? Thanks. Pat Callaghan Jr.