Little Navmap | Little Navconnect | Little Logbook Support Forum

I have been searching high and low for any known report of this but cannot find any reports of this, so will just check here. I recently picked up the Ini A350 and have been flying it in msfs 2020 and as I attempted to record a performance file for the aircraft in LNM I noted that no fuel flow is being shown. Is this a known issue with this aircraft in LNM? Thanks!

Is there any way to increase the size and make bold font for the taxiway numbers in LNM? Can't find anything in the settings for that and they are very small IMHO. Possibly set taxiway numbers to the same font and minimum zoom level as the gate numbers? Other issue is that taxiway number seem to only be visible on one particular zoom setting - 0.25nm on the scale. Zooming in closer makes them disappear while gate numbers are still visible. Second on wish list but probably unlikely: The taxiway numbers don't appear very many places and it's actually hard to find them - any improvement on that score would be really nice.

I have a custom airspace loaded in as a MOA (.txt contents are below) and when clicking on the airspace, the name shows correctly in the Information window, but along the boundary lines it simply says "MOA" and not the name of it. Checking other base game (navigraph) made MOAs the name shows, and in the information box there's another section labeled "Designation" which has that name also displayed. Is there a way to add this with the openair format? Airspace I'm trying to give a name on the boundary line: Example of a base nav one that does it (and with "Designation" section in the window)

First, i have to say how much LNM is simply fantastic. I'm sure the issue I am having is user error but I'm stumped and hope someone here can point me in the right direction. I have looked for a solution but havent found one that seems to be identical to my issue. I am trying to use my ipad and connect to the LNM webserver running on my sim rig. I can successfully connect using ip from firefox from both my ipad and a laptop. The LNM window opens, i can see my aircraft, the buttons at the top of the page, etc but the background maps simply don't load. The background stays red with the message "error please check LNM webserver is running" I verify that th…

Hello, why is this so ? Map shows IND 28000 ft Profile shows 29000 ft My Altimeter in Plane shows 28000 ft.

Hi, As the subject describes is there a way to separate Add-On from default airports on the map? I'm pretty sure the answer is no but surely Asobo or whoever can provide you with some sort of a flag when compiling the database that tells you which is which. I know you can mark the addon-ons but it would be nice to just show the add-ons and reduce the clutter. Regards, Harry

Is there any way to find different types of RNAV approaches (LPV, LP+V, LNAV/VNAV, etc)? So far I'm not seeing anything in the DB or on the UI. I poked around a bit in the navigraph db and some of the other dbs there but so far no luck -- slightly hopeful that some of the magic number fields in there might tell me.

Little Navmap 3.0.17 released Direct Download ► Windows 64-bit Installer (MSFS and X-Plane) - LittleNavmap-win64-3.0.17-Install.exe ► macOS - LittleNavmap-macOS-3.0.17.zip ► Linux (64 bit, based on Ubuntu 22.04) - LittleNavmap-linux-ubuntu-22.04-3.0.17.tar.xz ► Linux Debian Installation Package (64 bit, based on Ubuntu 22.04) - LittleNavmap-linux-ubuntu-22.04-3.0.17-1_amd64.deb Other Versions: ► Windows 32-bit Installer (only for FSX and P3D) - LittleNavmap-win32-3.0.17-Install.exe ► Linux (64 bit, based on Ubuntu 20.04 for Debian or older systems) - LittleNavmap-linux-ubuntu-20.04-3.0.17.tar.xz ► Linux Debian Installation Pack…

This is all I get when I run the scenery library database (Airports 83759, ILS 258 and Waypoints 343). I've added the correct streamedpackages folder in option/scenery library database c:\Users\Me\AppData\Roaming\Microsoft Flight Simulator 2024\Packages\StreamedPackages\. I'm running Little Navmap version 3.0.15.rc1 and sim version 1.3.23.0 (Steam). The sim is running and is connected. Is there something I can do to sort this out? Harry

I used this post (titled "Creating and displaying custom user airspace", below) to make a .txt in the User Airspaces folder, to add an airspace for my local airfield, and regardless of what class I set it as, it's border shows up purple. I would rather like for it to be orange or something (some colour that stands out a bit, as opposed to dark purple). I tried using this 78. Customize — Little Navmap User Manual part of the LNM user manual to try to change the colour, but that doesn't seem to affect the airspace I added (which also doesn't disappear). Even if I deselect ALL of the airspace types. Basically 1) Is it possible to change the colour of custom user airsp…

I just bought AS for XP11. When I use the default AS metar by tuning com radio to 122.000, the metar report doesn't match what LNM is showing me. Sometimes it's as much as a 90 degree difference in wind direction and 10 kts in speed. I have LNM wx set to draw from AS, so I assumed that they should be the same. Wind source is pointed to the sim. XP11. To be honest, I'm not which add-on could be the culprit for this difference. I'd love to hear your opinion on this. Thanks, KJ Edit: I just changed the LNM wx input from AS to the sim. The wx information is much closer to the AS metar, but is still not exactly the same. The fi…

tower, ground, approach, clearance.....circles on map ,...how do you make them appear please ? Thank you Donald

I would like to export the following info: Airport name, ICAO, comms and elevation. Is there a way do do this in LNM? I would like to convert this information into a pdf to view inflight in Ebag (XPlane). Many thanks. John

how do you get the twr, dep, grnd, clr circles to appear on the map. ? thank you

I don't have this issue but a friend finds that in the far north, LNM doen't show elevation data. Here is elevation data in lnm on a flight from pabr to pabw. The second image is what he gets This is what he gets for CYXT to CZST.

Can someone tell me where the option is to turn off the nose 'barb' on the user aircraft. Can't find it. Thanks, Al

This is a recurring problem and happens within minutes of preparing to take off. It happens at any airport, with any airplane and the resulting error message is the same: Too many errors when trying to connect to simulator. Not matching simulator interface or other SimConnect problem. Make sure to use the right version of Little Navmap with the right simulator: Little Navmap 32-bit: FSX and P3D Little Navmap 64-bit: MSFS You have to restart Little Navmap to resume.

LNM can use airspaces from Navigraph and/or P3d. PRO-ATC uses whatever AIRAC has been used to update it. My question is What about P3D? What would be the corresponding AIRAC? I'm asking because when I use "Simulator" (i. e. P3D) in LNM, the messages from PRO-ATC are either frequently early or late, suggesting that the sources for both are different. If I select "Navigraph" in lieu of "Simulator", then I'm missing a level of detail. I just can't sort this out. Jean-Pierre Gagné

I have found in my new MSFS2024 that when I have to do a VFR flight, generally loaded with points created by me in LittleNavMap or by the creator of a tour that sends us a route along a river, for example , the Garmin does not recognize these points and therefore the flight plan is worthless and it is not possible the use of the A.P. ..... and in fact if there are only those types of points, the flight plan only has departure and arrival. After creating the flight plan in LNM, I use the Multiexport Flight Plan Options / Category: Simulator / Microsoft FlightSimulator 2020 option. Is there any other way to export the flight plan so that the Garmin recogni…

How do I change the path "Flight Simulator Base Path" here? My Packages folder is not in the default location!

Hello, Version 3.0.16 will not connect to MSFS2024.

I am working on an app that draws SID, STAR waypoint on a map, but can't figure out how to find the geolocation of the Course to altitude(CF) used in SIDs. You manage this in LNM so I thought maybe you could give me a hint on how to do it. How do you find the geolocation (laty,lonx) for Course to altitude(CF) in SID that are used to draw this point to the map. I cant find this information in the MSFS database, nor can I find any other data that can help me calculate this.

Hello Alex Barthel, First, thank you again for LNM. Second, I'd like to ask if it would be possible to mark the default MSFS airports with different colors for the airports in the MSFS 2020 library and those in the MSFS 2024 library, thus distinguishing them from "personal airports" (purchased). Personally, I have the MSFS 2020 Standard version and the MSFS 2024 Premium Deluxe version, and both are installed because the former is used for liners (737-800 PMDG and Ifly, A320 Fenix) and the latter is used with MSFS 2024 aircraft. Thanks in advance.

In LNM, under Tools/Options/Startup and Updates, I have "Load last used flight plan" checked. Then, after creating a simple 3-leg flight plan and exporting it to MSFS, I launch the flight sim and load the LNM flight plan and begin my flight. I complete the first leg and then exit the sim with the intent of returning to resume the flight later. I've seen online advice saying how LNM automatically saves the progress of a flight plan when exited. However, when I do return later and relaunch LNM, it does reload that last used flight plan but it displays it without the progress I've made. Then, when I relaunch the flight sim and load that flight plan, sure enough it has me bac…

Hello folks, I have a problem that just started happening a couple of days ago, im trying to create a flight plan by choosing my departure then my destination, but then when i try to hit the calculate button it grays out and nothing happens. I get no box that opens up so that you can calculate your route , it just greys out. Is there somthing im doing wrong? Thanks......RobertC