Little Navmap | Little Navconnect | Little Logbook Support Forum

A while ago, when updating LNM, all of my settings went back to default. Most of the them I've got back to where I want it, but I cannot find the option where I can highlight a waypoint/airport in my flight plan, and SINGLE click for it to snap to on the map. I have to double-click which also opens the information window, which I don't care for. Thanks! Mike Caparula

Hello, Your WONDERFULL tool shows airport elevation .. I suppose you find this in the Airport Bgl...So you can decompile the airport .bgl... My question ; would it be possible that we can change the airport altitude using your tool And Little Navmap recompile the Airport information to save the new airport elevation in LM P3d... hum,hum... A dream .. for me ADE does not accept 6.1 version ... Just a question..😃 Regards

Dear Alex, First of all, thank you for the amazing work on Little Navmap — it’s an essential tool in my simulator setup. I would like to ask whether it is currently possible (or planned for a future version) to overlay real-world weather data from sources like OpenWeatherMap directly onto the map in Little Navmap — independent from the simulator’s built-in weather system. Specifically, I’m interested in visualising different weather layers such as: Temperature Pressure Clouds Precipitation Ideally, it would be great to be able to toggle these layers individually, similar to what we can see in s…

Is there a way to copy the flight plan as a string of text? KMEM IXMIX LDK KEKY KBHM I'm not wanting to export the flight plan into a simulator or another application. Just wanting to be able to cut and paste the plan as a text string. Thanks Jim

Why, when I select “Show Only Add-on airports,” does the map display airports that I don't have in my Community folder? Or should all airports from “Packages\Official” be displayed?

Is there an option to move the major section tabs to the top of the group as shown?

Hello, I have a question. Is there a way to define a shortcut for the Simbrief import/export ? Or perhaps even two icons in the toolbar? Greetings SirJohn62

I understand the problem (I think) with getting data for airports in 2024 because of the streaming of the data. However in SU4 they allow you download your content to the local storage (if its downloaded I am assuming that this is the scenery you want to use!). I have already downloaded a lot of the streamed content, scenery included, and was wondering if you are contemplating parsing the airports that are loaded locally (including Payware and Freeware). My guess is it would work something like parse the locally stored airport scenery (customisable path), create a list of those airports and exclude them from producing any results when the scan of the Base Path is per…

With the last update It happens a strange thing. I unistaled the the old version ( 3.0.17), I install the new ( 3.0.18). I open it. the version is the last. I close Little nav map and reopen again...but the version is the old...Why?

Hello, I just updated LNM to version 3.0.18 and when I launch LNM, I see these tracks: They seem to correspond to flights I've made, except for the one that's moving away to the right at the bottom. Could someone explain: 1/ Is this normal? 2/ If so, what function do I use to enable/disable them? Thank you in advance.

Since a few months I see that LNM doesn't show the actual weather that is in XPlane. See screenshot below. On departure LEST had a SW wind, gusting 15+ but the map depicts "no wind". Once airborne it seems to show it correctly. This started with 12.3 beta and is ongoing in the crrent 12.3.0R2. If it's only on my end what should I be checking for? Is there a way to show only NOAA weather on the map? https://imgur.com/a/MTDJEcO

Hello, I'm gradually migrating from MSFS 2020 to MSFS 2024 and I have about fifty airports in the Community as well as Navigraph AIRCAS. Until now, I've been using MSFS 2024 with the MSFS 2020 scenery library. Yesterday, I loaded the MSFS 2024 scenery library according to the documentation's recommendations without any problems. However, when I look at the downloaded elements with MSFS 2024, there are fewer downloaded elements than with MSFS 2020 (VOR, NDB, etc.). My question is: With only the MSFS 2024 scenery library (MSFS 2020 uninstalled), will I have the same flight assistance features for IFR flights (SID, STAR, APCH, VOR, DME)? And most important…

In LNM2020, Asobo-designed airports would have a yellow ring around them on the map so you know they are nice ones and not auto-generated. However as I'm exploring the new MSFS2024 and LNM2024, I noticed this is no longer the case. For example I pasted a screenshot of LSZB which is a custom airport in MSFS2024, but does not have the yellow ring. What am I missing here? Thanks! https://i.ibb.co/SwMMyTCb/image.png

After loading/scanning of MSFS 2024 scenery (while MSFS 2024 is running took about 10 minutes), when I select View | Airports | Show only Add-on airports … none of my add-on airports show in the map? I had made an assumption the scan of my MSFS 2024 scenery and loading would have identified “add-on” airports, but this doesn’t seem to be the case. I can go thru every add-on airport manually and locate them on the map and set them as an Add-on airport (yellow circle), but was hoping to avoid this as I have a considerable collection of airports for MSFS 2024. I also noticed that when I do set an airport as an “add-on”, then proceed to select View | Airports | Show onl…

MSFS2024 Little Navmap 3.0.16 64 bit Export Flight Plan as MSFS2024 - does not open in GTN750 Export Flight Plan as MSFS2020 - open in GTN750 !

I use the built-in web server to display little nav map on my tablet which has been working fine for a long time but I noticed if I filter the primary window to only show airports with longer runways that filter doesn't seem to carry through to the tablet.

Found a strange issue scanning and loading XP12 sceneries. I have the "x-Prefab FSE Airports" packages linked from another drive in the Custom Scenery folder but they're disabled in the scenery_packs.ini file. Yet, even after multiple re-scans with LNM, the airport (SPYL) for this library is loaded and displayed. Only if I actually remove the shortcuts do they get removed from the LNM map. After some more checking it seems all the "x-prefab" airports are loaded as long as they're present or linked there despite them being disabled in the .ini file. It only seems to happen with this specific scenery package. For reference this is the package in question: Prefab s…

Hi I got a Navigraph data subscription to use with Little Navmap. The FMS updater is very straighforward and I get the files and folders on the right place: The cycle_info.txt file shows the current data: But in Little Navmap, on the menus I dont seem to have the updated airac: Shouldnt the Navigraph part be updated with the new files? As you can see the X-Plane scenery library loader picks the data fine from xplane folders. But I wonder if theres something wrong as Littlenav map dont seem to be able to read the data directly. With MSFS24 I seem to have an issue that prevents to pick the data, not your problem. B…

Hi @albar965, Please find Robinson R66 profil : <?xml version="1.0" encoding="UTF-8"?> <LittleNavmap xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="https://www.littlenavmap.org/schema/lnmperf.xsd"> <AircraftPerf> <Header> <CreationDate>2025-10-28T11:40:55+01:00</CreationDate> <FileVersion>1.0</FileVersion> <ProgramName>Little Navmap</ProgramName> <ProgramVersion>3.0.16</ProgramVersion> <Documentation>https://www.littlenavmap.org/lnmperf.html</Documentation> </Header> <Options> <Na…

Feeling awfully dumb right now but anyway... I wanted to try displaying LNM in the aircraft EFB using LNM VR mod. Not only did I not get around to getting it to work, in the process I "lost" the wind indicator at the top of the map. And now I cannot find how to bring it back! I intended posting an image showing the item in question but I cannot figure out how to post an image! Not my best day I think... Any help would be appreciated. Thanks!

Hi Alex, Is the Map Trail data file able to be backed up before deleting the map trails?

Hi I now have the -600/-700/-800 versions for the PMDG 737NG for MSFS 2020. I want to create a multi export location for the PMDG 737-600. I can't see from the manual or by trying to overwrite the default table how I create a dedicated line for this aircraft. I have pre-defined lines for PMDG Aircraft and PMDG Aircraft for MSFS. It may be that all the 737 flightplans are picked up in the later file but in the -600 in the sim when I try to import the flightplan from PMDG 737 nothing happens Grateful for any help please

I am trying to use this to export LNM file to Garmin TDS GTNXI C:\ProgramData\TDS\GTHXI\FPL. The file does not export. I get no messages indicating the file was not exported. But the file is not in the FPL folder. What could I be doing wrong. Thank You. Bill McCracken

Hello, I'm using the LFSB scenery from France VFR. In LNM, when I search for LFSB, it finds the airport, but strangely, it displays LFH2. Could you please provide an explanation, or better yet, a solution? Thank you in advance.

For about a month now, I cannot download either the Pacific or Atlantic tracks. It says it cannot connect to the website. Anyone else having this problem and/or know the fix/work-around?