Little Navmap | Little Navconnect | Little Logbook Support Forum

I have been flying with LNM for quite some time, probably since your first release, but this last week I have developed a problem with my aircraft not being tracked. I see my VATSIM red shadow, but not the yellow craft. Navconnect shows connection, LNM shows connection, but the Simulator Aircraft window does not show the aircraft and that it is connected. It says "Prepare the flight and load your aircraft in the simulator to see progress updates." All this is done and flight is in process. None of my setup has changed to the best of my knowledge. I have tested the internet and the wireless connection without any problems showing. Anybody have any ideas? Please not the obv…

Hello, I'm experiencing the same issue that is described in this thread: I'm wondering if there is any new insight on it. I tried deleting the WidgetDockHandler and that did seem to fix the issue, but then it returned and when I went back to the ini file, it didn't seem to have a WidgetDockHandler field. Renaming the ABarthel folder to generate a new profile does "resolve the issue" but I am really, really, really not looking to start over again with LNM right now. I tried even copying in the WidgetDockHandler content from the new profile's ini file to the other ini file, but that didn't seem to do anything. Alex mentions old monitor co…

Wondering if it was every figured out how to scan your HDD and automatically label custom airports in LNM 2024? I know this wasn't possible a while back. I have like a thousand addons so it's impossible to manually label them all in LNM and it's been causing me some difficulty in msfs2024.

When clicking through airpaces they are shown on info tab. When clicking in an area with no viewable airspaces the info tab should be cleared or show something like "no airspaces here". Now I cannot always be sure if an airspace is there or not. Second I suggest to show airspace altitudes top down, so switching the upper and lower limits to read top down (eg Class C 14000 MSL | 8000 MSL // Class D 8000 MSL 5500 MSL etc.) instead of (Class C 8000 MSL | 14000 MSL // Class D 5500 MSL 8000 MSL etc.) Thanks so much.

I have managed to import a lengthy flightplan from Simbrief into LNM. The map shows distance of each leg but it would be very helpful if it also showed the compass heading of each leg. I know I can bring this up for each leg manually using ("Measure from here). Is there a setting so that compass headings are shown automatically. I have looked at the manual but don't see anything. Thanks for any comments. Martin

I think it would be great to be able to have a toolbar/menu/shortcut to center the remaining part of a flight plan. Say from the WP previous or even the current position to the destination. Thanks.

Is there a way to add a destination final gate or parking spot to a flight plan please

I am new to Little Navmap but I am slowly learning it and loving it. I am also slowly learning how to fly. I started out learning how to do IOLS approaches and was able to producr proper flight plans and fly them successfully. Now I have moved on to learning how to do RNAV approaches. Pretty simple process that I think I understand fairly well. However, when producing a flight plan in little navmap for an RNAV landing at the destination, I don't see runways identified as RNAV. I see RNP, and after some reading on the internet, I thought RNP is how Little Navmap specifies RNAV runways. But when I try to use one in my flight plan and then fly the plan, I don…

Hello, All the aircrafts i see on the map show (for me) to much information , how can i reduce it and only see the aircraft type, altitude , speed and destination code? Is this possible? Thanks in advance

Any ideas what's going to happen with LNM for MSFS2024? Support for PLN files seems mostly 'deprecated' by Working Title in favor of their in-game 'EFB' tablet talking directly to their in-game Garmin panels. The World Map 'load PLN' option has gone. The EFB tablet is supposed to have a 'load PLN' button but this looks like it's only just been added as an afterthought (the button still shows its 'reference' title instead of the expected label text) and everything in the PLN gets thrown away except for the lat/long of each waypoint.

I am just starting to watch a detailed video of how to use Little Navmap. In the video, as the flight plan is being laid out, starting with selecting the departure airport, everything is denoted in yellow. However, no matter what I do, everything I try to map comes out in red, even when all I have done is selected the departure airport, and instead of the yellow circle around the airport icon, I get a big red circle. I have updated the Airac data in Little Navmap and then reloaded the scenery data. I am researching this problem but can't find a solution that pertains to me, or at least that I can undersatand. Can someone please help me understand why I am g…

Is it possible to read En-route/Aloft temperatures in LNM? I sometime fly airports not in other plan tool's database, and need both distance, enroute average wind and ISA deviation for more precise fuel calculation. the distance and wind read in Fuel Report tab is great, but I can't find ISA deviation. Is there any way to read it in LNM?(I know it's in ActiveSky, but I didn't use it for XP12 now) if not in current version could it be added? Thanks.

All the work figuring out the 2024 BGL format may not have been in vain.🤞

I've noticed that other programs display the direction of the flight plan. Going from the bottom to the top of the display. Littlenavmap top to bottom. Can this be changed so I have all flight plan flights going in the same direction? Thank You. Bill McCracken

Good day, Just wondering if it would be possible to use SayIntentions as a weather source now that it provides the last 24 hours to match what FS2024 can do. They have an API that can provide data. It would be linked to the users API Key. Pretty sure it has weather information. https://p2.sayintentions.ai/p2/docs/ Thanks for the consideration.

Hi, what is the reason some of the Airports ICAO Texts are readable while others not ? (only when zooming in?) How to change that all are readable ? It does not look like there is any rule behind?! The airports size cant be the reason as there are small little airfields readable while mid sized airports are not.... Thx so far

Is there a way to snap to a airport/navaid/etc on the second point of a distance measurement? Can the degrees and NM be shown with tenths of a degree and NM?

Hi! I have noticed that after the last betas AI ships in MSFS2020 are not visible in LNM`s map. I have checked my settings and I havent changed anything. Does any one have the same issue? Thanks!

This screenshot is from LNM using MSFS2024 scenery. This is from a default airport, but I also get this on add-ons as well. Any suggestions?

I'm not sure if I am having my own Mandela effect but didn't the AI aircraft tags in Little Navmap show the departure and destination if you clicked on them? If not, disregard but I could swear I used to be able to see where the AI planes were headed to but no longer the case. (Using PSXT).

Hello everyone. I am a new Little Navmap user and I have the following problem, which is very simple but annoying. After entering a flight plan and also importing a performance profile, I get all the necessary data (altitudes, route, etc.), but there is absolutely no way to obtain the estimated TAS or GS speeds. I actually need to print them along with the altitudes. Is this normal, or am I missing something? Thank you.

Could you please add the state to the info windows?

Hello, If there were a real world UTC time info for the "next waypoint" in the progress tab of the flight plan, that would make things much easier for oceanic crossings in Vatsim :) There is already current UTC info. All I'm kindly asking is to add the same info for the next waypoint! Thanks for this beloved; free and great product @albar965 !

Hi, I'm getting the above error code, but can't track down the precise location of it> Can someone kindly assist me please? Thank You Martin

Hello Alex, Thank you for your great work again! After I downloded the LNM 3.0.18 from the Github down in assets (for the portbale mode), I run de script "Little Navmap Portable.cmd", that was present in the main folder, and it created the 3 folders that is supposed to 1-"Little Navmap Cache" 2-"Little Navmap Logs" 3-"Little Navmap Settings". Ok till here. If it is Portable, why does in create a ABarthel folder in "Roaming folder" too? Why do I have two little_navmap.ini files, different sizes, one in the new 3-"Little Navmap Settings" and the other in the ABarthel folder (this with a later time so is the most important)? Understood that the MSFS2024 database…