ChasePlane Support

OK, getting to grips with CP. When I am setting up the camera views and have presets visible, then use the keyboard to move about(after setting it up) it will only do this when CP is minimised. With CP active, can only move about using joystick buttons and hat. Can you use the keyboard with CP active? How to use CP to create outside view to pan around aircraft? sort of like the FSX spot and locked spot(which works great+

In FSUIPC offset (S32) when I see 225612 in Chaseplane I see -0.13 Gb, which is the true one ? !

Hi all, I have this problem with ChasePlane that on longer flights my VC views shift around a lot (especially when making turns) so I have to re-program the views after every turn. Is there a fix for this? I think EZCA had the same problem. Thanks in advance.

Hi Keven, Perhaps something for a future version (1.x, 2.x, etc.) Not sure if this is feasible or even all that useful, but; HID Macros has a feature where it will recognize multiple input devices utilizing the System ID. This allows for things such as multiple keyboards, keypads, etc to be used as additional input devices. If something like this could be incorporated into ChasePlane then it would allow for a second keyboard, USB keypad, or essentially any recognized device to be as a dedicated camera controller. I'm currently using HID macros and USB Keypad for my 2D panels. The source code is freely available, although I'm not sure what format…

Hi. Chaseplane has been giving me issues. After a while of using it. Middle mouse look functionality stops working and I can't open up the chaseplane UI. If I try to then restart chaseplane, it gets stuck on the splash screen for a long time and then it will get stuck on the 'initializing' screen. Then to get chaseplane to work. I have to restart the computer which is not ideal. Running in experimental mode. Thanks.

G'day all, I've just moved over to Chase Plane from EzDok V1 and V2, getting my head around it slowly. An issue I had in EzDok is still present with Chase Plane, where I press the key to go into the cockpit and I either get a wide-angle view with no VC, or a wide-angle view with the 2D panel. I then have to spam the key until finally the correct preset is loaded. Tried all of the suggestions here however the issue persists. I even tried uninstalling Chase Plane, deleting my cameras.cfg file and letting P3D build another, and reinstalling Chase Plane. No help. From what I can see this may be an ongoing issue however would appreciate if any light could b…

I am not yet a CP user but I refrained from updating my EZDOK to the current version while waiting for your finished product. One thing I did not yet see is the possibility to treat the HAT switch as a button. I am using EZDOK1 with the Thrustmaster Warthog and have assigned the front lever to this function so that i am able to pan around AND toggle views without my hand leaving the stick. I would clearly miss such a function. Maybe I overlooked it, otherwise maybe you think about implementing it by chance. Looking forward to the release.

Hello, When i am in the cockpit of both the DASH and 737-8 and start the APU...all the sound is coming in nice and loud... I switch to outside view and i can not hear the APU or anything else outside as if i am stuck inside the cockpit enviroment any ideas anyone please P3D version 3.4.18 Win 7 DASH extra sound pack

Hi guys I love chaseplane however recently an issue has caused me great frustration: after a while, chaseplane's CPU usage increases dramatically, so much so that I could no longer change views, the middle mouse button look does nothing but bring up the menu... This can be resolved by restarting but it gets old really quickly. The CPU usages goes up to and stays at at least 20% on my 6700K and P3D V3.4. Any ideas?

Hi. I found a bug in CS that was quite annoying and took me 2 whole days to find and it caused me to not be able to record video for Flight Sim. I use Nvidia Shadow Play to record video and audio in playback in P3D. Shortly in all playback videos i noticed popping that occurred in my microphone every few seconds and sometimes it would occur and when i restarted it wouldn't occur so i thought there was a driver issue and/or a problem with my brand new microphone. The microphone i used was a ATR2100-USB Cardioid Dynamic USB/XLR Microphone . So i proceeded to buy another microphone (Blue Nessie) and when i tried to record in P3D the popping still occurred. Also i trie…

Which to buy for 'Chase Pane'?

Love this product, just one quick question. For all the cockpit or plane views you are able enable/disable trackir per preset (which is awesome). However how do you disable TrackIR in Cinematic View?

Apologies for raising this: I really *have* looked, but haven't found the answer (and it has to be something simple, one feels...). 8-\ How can I completely and permanently disable cinematic mode? I seem to have managed it previously, but following a recent update it's back and won't go away..... :-( Many TIA, Brian

Hey Guys, after Chase Plane Updated i'm missing Standart Views like Fly-By, Outside or the Tower View. They are not appearing anywhere anymore. They are missing on every Aircraft i load. They have been there before. Any Idea how to get them back?

FSX-SE is opened at the Steam Library page. When started it opens VFXCentral and ChasePlane - all is good, except it would be nice if you did not have to click Yes for each of VFX and CP, as it should be automatic as the CP Preference is turned on in Auto-Launch. When I close FSX, ChasePlane closes automatically but VFXCentral does not - this causes Steam to keep showing FSX as still running and you cannot launch FSX again. I discovered that VFXCentral was still open, once I force VFXCentral closed then immediately Steam shows FSX as closed and it can be launched again.

Every other movement is smooth and without bugs, yet when I raise and lower the camera, the image flickers, as if for a fraction of a second, the camera snaps to a different view and back again, for as long as said command is applied. Is there a fix? Is this a known issue? Thanks in advance!

I have a proposal for a new feature to accompany the cinematic camera mode, although could include settings to add it to external, or even cockpit cameras, too. The maximum inertia setting for any camera is 20 (unsure what units this is measured in but it is a hell of a lot when you try to move the view around). This can create really nice slow panning effects but obviously (very slowly) runs out of momentum and stops. My suggestion is allowing this setting to be set further than 20, to a value represented by the infinite sign. Obviously, if the camera actually had infinite inertia you wouldn't be able to move it, but if it had infinite inertia slowing down, we …

So, was getting ready to fly tonight......started up Chaseplane.....it downloaded the latest build. And with this latest build, the main things I use chaseplane for no longer work. Those things are looking around the cockpit, and switching between the views I created in the cockpit. Every time (and I mean every single time) I try to look around the cockpit with the mouse now, it instantly drops straight down, then back up again. I never had this problem before, I could smoothly pan around with the mouse whenever I wanted. Now, the moment I use the mouse, the cursor drops to the bottom of the screen instantly, my view is of the seat. I could avoid the m…

Hi, Just purchased the Chaseplane v0.1.614 Alpha Exp. I've set up my onboard camera's no problem, but when I use pilot view (which I setup) my control of the instruments in view is no longer possible using my mouse. It is possible to use my mouse in the Instruments view (which I setup), but sometimes this has stopped. A restart of Chaseplane resolves the Instrument view, but not the pilot view. I understand this is an Alpha stage development, and just wondering if anyone else has the same issue? The views stated above are my personal views. Great product by the way :smile: Thx in advance.

Hi, ChasePlane does scan the airport information, including runway, helipad, gate, and parking. Can we have a tower view in each airport? It's useful to have an overview of the entire airport, and you can image you're an ATC guy. The tower view in fsx/p3d is to track your aircraft. You can't move the camera without restraint.

I've noticed when I go to the external cameras in Chase Plane there are no sounds in some not all of my planes. I don't know what the normal is so if you can fill me in I would appreciate it. Thanks

Are there any issues or special settings to be able to have both a joystick and an Xbox controller plugged into FSX-SE and use simultaneously? I have always only used the Logitech Extreme 3D Pro joystick but I have just added Chase Plane and from what I am reading it is recommended to use the Xbox Controller in order to have access to additional buttons and movements for Chase Plane Assignments.

Hi, Do you think the following layout (the on-board part) can save more space and keep high efficiency? A thumbnail can present everything for this viewpoint.

Hi Just an ideafor future versions, to facilitate screen recording etc. with ChasePlane. Record more then one camera view at a time. Just saw this post on the Facebook Engineering page. They have optimized 360° streaming by up to 92%. Imagine having a 360° view of a flight simulation online video. And even more being able to choose your own ChasePlane camera views from an online video you watching. More interaction. But to begin with facilitate screen recording and capturing. Best regards, Sigurdur At today's Video @Scale event in Menlo Park, Facebook announced updates to its dynamic streaming technology to deliver high-quality 360 videos mo…

When I scan my prepar3D it recognizes all the spots and gates, but when I select a static view it doesn't work and just spawn somewhere inthe sky, please help me