ChasePlane Support

The only reason I ask is that I only want realistic vibration effects in the CH47 within P3D 4.4 with Oculus Rift. Its a lot of money to spend if it’s not to my requirements. Thanks for any help.

Dear developers, How can I adjust (if possible at this moment) the shaking effects during the usage of CP? It's more urgent to me at this time to adjust the shaking during takeoff and landing rolls (the amount and frequency seem appropriate but the movements are very sharp and thus unrealistic, they should have more dumping) and also the shaking during turbulence, which seems good to me except that it will shake only in the vertical axis, I feel that it's lacking some shaking in the lateral and longitudinal axis as well during turbulence. Thank you in advance.

Hello friends, i have a keymapping today in ChasePlane for my B737-800 NGX and tested it, but unfortunately ChasePlane hangs up again and again before this key-free mapping was not the case What should I do, create the P3Dv4.4 from my backup and reinstall ChasePlane? Is it possible to backup ChasePlane settings (without key settings)? Thank you in advance! Greetings Peter

I am trying to remove it from FSX:SE, however it won't cooperate. There are no ChasePlane entries in cameras.cfg. I deleted the OldProp Solutions file from ProgramFiles(x86) and AppData. Yet, I still have the unfriendly OnBoard camera, and the default VC is gone. Help me?

Hello! I noticed a strange bug with Chaseplane & the Captain Sim 757 today. I flew from Stockholm to New York when Chaseplane suddenly froze when I turned the heading knob. I also turned the course knob and the same thing happened. I am experiencing the same bug now during the return flight. I de-activated the experimental version option, but with no help. I realized that when I turned down the wind effect, the problem was gone.🤔 Is there an easy solution to this? I really don't want to re-install the application since it has taken time to configure views & motion effects. P.S. This bug only occurs with the 757. Thanks in advance! Viggo

This is probably a dumb question with an obvious answer. Is there a way to assign the pan view to the right mouse button. So If I hold down the right mouse button I can pan within the VC? This might not be possible as the right mouse button brings up the menu within P3D. I am switching from a Saitek yoke with the hat switch on the left to a CH yoke with the hat switch on the right. So it is a pain to try and pan and use the mouse at the same time in the VC to activate switches, knobs, levers, etc. Thank u!

Hello I had just gotten Chaseplane and I do like it, however I would like to set it up so that the controls are that of the default P3D camera controls. I was able to do that for the interior virtual cockpit view using the spacebar to move around, however I came across a few issues. The panning of the camera is too slow and I would like to speed it up to that of P3Ds vanilla camera system. Another thing is that when I am outside in LOCKED SPOT view I cannot pan the camera around like I can in the interior views. I already know how to set up Chaseplane mostly but I just need help with these 3 things. 1. To increase the pan speed/rate in the interior views …

Hello, friends, I now switched to P3Dv4.3 to 4.4 and use for my B737-800,ChasePlane v1.0.22,now I have the following problem! The start from P3Dv4.4 runs without problems, but after a selection of an airport or aircraft with OK confirm, P3D switches itself off and gets the message "disonnected from P3D". What do I have to change and I have to recreate my settings! Thank you Greetings Peter

Hi guys, since Maddog X has its windows that conflict me with Cheaseplane I use for all the other airplanes, when in the simulator I launch Maddo X, is there a way to not let Cheaseplane activate? Alean

Hi All It has been perfect for such a longtime, I've had no issues at all, until now. It will no auto start anymore and then gets stuck on 'getting computer ID' That is with the SIM(P3DV4.2) started. If I wait approx 4-5 mins it will connect, not good though Any tips would be good Thanks

Hey there, Been using CP for the past year without problems; recently moved to a new PC with a clean install of P3Dv4 and now facing two weird issues with Chaseplane - any help on what I could be doing wrong here will be massively appreciated! 1) Panning with hat switch in the default P3D spot view -> I've assigned the hat switch in CP to the up/down/left/right as per normal; up and down work fine, but left and right always reset to default position when first pressed (i.e., I can pan left around the plane, but if I then move right it "jumps" from wherever the camera is to the default position and then starts moving right.) - I have triple checked and the ha…

Hi Seems with the new update the turbulences are stronger in visual shaking(Gyroscopic) and full green scale in the Acc bar. Not the big problem but i have to set new parameters. Looks different now. Seems acc works like gyro and gyro like acc? Everything looks a bit strange now but not that bad. Can someone confirm that? Sim FSX Experimental AS16 Max

Hi, When i am RNAV landing on TNCM (St Maarten in this case it could be anywhere of course) with the following parameters; B748, RNAV, IAS 142, QNH 29.99, Autobrakes 1, Flaps full, Gross weight 266, fuel 10, i make a smooth landing to full stop without extra braking, no warnings, no problems at all. But when i do a replay i got height warnings, overheating brakes, tire pressure etc it looks like the parameters are counting up instead of staying original. Thanks, Hans

And from elsewhere I learn that I'm not the only one with this problem. I put stuff in the FSFX Packages cart and check 'Pay with paypal' and then when I go to paypal to purchase Paypal reports FAILED. The product I tried to buy was ChasePlane. Meanwhile I am able to successfully buy other stuff from the internet at other sites just fine going through Paypal, only the FSFX cart Paypal purchase does not work. Is FSFX Packages stuff able to purchase elsewhere at another online store with another cart system?

Please help, I uninstall CP from fsx Steam from the VFX Central and even control panel and delete everything. I still cannot get my hat switch to work and my default view back in the cockpit. Someone please help. I read a post a post where it said in p3d just deleted the camera.cfg file. Boy was everything else got messed up.

Hello guys, is it possible to add two Hat Switches? I use my Yoke for aircraft with a Yoke (like 737) I use my Joystick for aircraft with an Joystick (like A320) The hatswitch is configured with the Yoke, so I have always problems when I use the Joystick. (I have to use the Yoke Hatswitch) Is it possible to ad two Hat Switches (different Profiles)) Thanks Urmel

Hi, Not sure at all if its a chaseplane issue, but today my flight with the NGX had sounds from the Cockpit with externally including world cams. Latest drivers and 4.4. Anyone else? Thanks Michael Moe

Everything was working fine yesterday and now whenever I startup p3d v4.2 mouselook defaults to be on and the only way to turn it off is to kill chaseplane and then start it back up again, then it's fine. any ideas?

Not sure if this is a ChasePlane or Maddog issue. I've had two CTD while switching views ChasePlane while using the latest 1.3b351 release. For some reason it is triggering the Old Prop files, see attachment. Not sure were to go from here seeing I haven't had CTD's in some time. Not sure if the MD-82 is effecting the old prop files in some way. https://prntscr.com/lyft5h

Hello Support We can not operate button and switches if Chaseplane is running with A2A CESSNA 172 within FSX. Here a small description we have sent to A2A support. Herewith the new investigation for the non working switches and buttons.1. We stopped Chaseplane working after loading A2A-172 and we tried to use standard view withint the FSX.2. If we want to use the standard cockpit view which have (Chaseplane) within the view name we can not operate those button and switches.3. If we choose the FSX instruments view (not a chaseplane view and chaseplane is off) we can operate all buttons and switches as usual.In order to startup engine and operate the buttons …

I am using P3d V4.4 but it was an issue in 4.3. I assign my controllers though FSUIPC exclusively, thus no overlap with P3d controller settings. My Hat switch is assigned in Chaseplane to the P0 P90 etc references and I do not seem to have any overlap with similar settings in FSUIPC. I am not using Game mode, which caused this problem for others. Going from one preset to another is smooth. But just panning around the cockpit is very juddery in my PMDG 737 NGX which is all I fly. When I arrive at the final viewing point it also seems to vibrate back and forth a bit a bit around this final spot before becoming stationary. Using the latest experimental updates for Chase…

I've submitted a support ticket, but thought I'd post here to see if anyone else ran into this issue with multiple GPUs in SLI mode with CP. If I disable SLI then CP works fine. In addition, I can see to disable the CP Gyro when using the A2A Bonanza, Default F22 works fine. https://youtu.be/TVXalI4XTdQ I'm running v1.0.20 of CP. Cheers, Rob.

So recently I bought ChasePlane, installed it and it did most things it was supposed to do. However, there were a couple of issues. First of all, I was unable to connect ChasePlane to WiFi, (my PC wifi is fine, but ChasePlane wouldn't connect) meaning I could not use the community tab - it was greyed out and I assume the WiFi was the issue. Second problem, the major one, it was very delayed with its responses at times. When the simulator was paused it worked fine and it also worked great while stationary on the ground. However, while flying there were times the cameras just wouldn't move or switch, sometimes taking more than 30 seconds for my hatswitch or view switcher bu…

Hello, I have been spending the last week setting up Windows Pro and P3D 4.4 because of a PC crash. So I've been testing my planes and scenery and have discovered something that's bugging me. With the A2A planes I can set up the cameras and when I load any of them all the cameras are there with key and button assignments. Not so with PMDG. Every time I load a jet, say a 737-NGX (or any other model) I have to assign keys to each and every livery's cameras. This is very tedious. I saw this on my last install in 4.3 too. Do I have to do this with every last model & livery of 737's, 747's and 777's? Thanks.

Hello, Ive subs some of presets but it ended up wihtout in order. I have tried drag up/down but it wont move so how do i move the preset to bottom or top? because my first camera that show up is ovehead instead virtual cockpit. Thanks before.