Pilot2ATC Users Forum

Is Pilot2ATC compatible with the FSLabs A319? I have tried to file a plan but, for whatever reason, PTT would not work and the frequencies would not be automatically changed by the PNF. P2ATC works fine on other add-ons that I have, so I wonder if this is a problem just with the FSL. Thanks

Hi Everybody Could anyone help me about that. I have to change my motherboard and after reinstall my licenced PATC2, could not anymore activate. I mailed with all information to the [email protected], but until yet no sense (since 27.12.2018) Thanks for info about that.

Dave, I started up P2ATC and for some reason, the only way I can communicate with ATC is thru the speech assistant. Never had this problem before. Closed P2ATC and restarted, same thing. How can I get it back to normal? Thanks for the help. Rodger

hi all ! just own and very new to pilot2atc and im using Fsgrw .Pilot2atc say can't detect Fsgrw so actually which Fsgrw file should i select in the weather setup path for Fsgrw as i can't find them . thanks in advance.

Hi Dave. Sorry if this has been asked before. What do I need to set in P2A to have it recognize the new Active Sky weather. I assume it would be SIM weather, but thought I would ask. Thanks.

Here's what happened: I bought a new SSD drive and attempted to move X-Plane 11 to that new SSD. The original C drive was getting cramped on space. It worked. X-Plane is all by itself on this 1TB drive. Here's where the issue comes in. When I tried to start pilot2atc, I get an "invalid license (invalid hardware id)" error message on the load screen. I went back to my purchase email that contains the activation, entered it in, it goes through the acquiring license, and then I get another error message, "A License key can only be activated once for any PC and on a maximum of 1 PC." I sent an email to [email protected] on 12/29/2018 at 9:23p, but have not heard …

Sometimes when I close P2AC (clicking on the [X] button) to do something else other than Sim, I cannot open it again without rebooting my PC. I get a window... "ANOTHER INSTANCE OF PILOT2ATC ALREADY RUNNING...." I have check Task Manager, but there is nothing there (unless there is another process I don't know about). Does anyone know how to fix this? My sim is running, my charts are ready, but P2AC will not load... Thanks

I have just purchased pilot2atc recently, and when I attempted to do a flight, I could not get a response from the clearance delivery controller. I am using the say it function and I can hear the pilot request clearance, but there is no response. I have the same automated voice set for both the controller and pilot and I have my flight plane validated and filed. I'm sure its an issue with my configuration o.f the program and it's not a bug but I'm not sure. Any suggestions?

Happy New Year. I was just wondering if you can run P3Dv4 on a computer with 1 to 3 monitors full screen and Pilot2ATC on a separate monitor, same computer. PS I hope so... Robert

I have my PC running Xplane and another running P2ATC. My brother has his PC on the same network running Xplane. Does P2ATC get confused about which Xplane its connecting to?

Have Pilot2ATC for a couple years. My favorite flight management program (dont use the atc much) In latest version, top info panel is stuck on "WPT Hdg=75" and all the ETE. Dest. TOD numbers are wrong. Speeds are OK. How do I fix it? Alan

I import a flight plan made my Simbrief. I validate and file. It gives a departure runway, SID and arrival runway, but no STAR. When I add a STAR, I have to validate and file again. it then deletes my STAR from the plan! I'm probably doing something stupid!

At this time I have no need for the ATC part of this program, I might later on but not now. Can Pilot2ATC be used as only a flight planner and moving map without using the ATC part? Thanks for any replies. Ralph

I have downloaded the trial version and installed it but it does not put an icon on the desktop or when I click Start program and get the little window then press start trial I get this message: Error: The specified service does not exist as an installed service ( Exception from HRESULT: 0x80070424) Purchase a license and enter license key. Then I looked to find where it installed itself and it is nowhere to be found. Very strange. I am using Windows 10 and Prepar3D_v3_Academic_3.3.3.17556. Could you kindly help me, please? kind regards Richard

P2ATC will not connect to X Plane 11 anymore. It has always worked fine until a couple of weeks ago. Will an uninstall and reinstall help? Any other ideas?

Bonjour DaveMa clef: J’ai installé un deuxième XPlane11 sur mon PC et depuis impossible de registre ma clef,?Merci à vous de bien vouloir reénitialiser ma clef si possible.Bien à vous.Jacques orrieux 0660812218Envoyé de mon iPadHi DaveMy key: I installed a second XPlane11 on my PC and since impossible to register my key ,?Thank you for kindly resetting my key if possible.Yours truly.Jacques Orrieux 0660812218Sent from my iPadEnvoyé de mon iPad

sorted

I am in cyul (addon scenery), taxi instructions are perfect... Once i got to runway 24r, i received instructions to hold short because of traffic landing which was true and it was great. Except that hold short instructions due to traffic was looping without stoping...

I'm really enjoying this addon, but have been having trouble getting approaches to work due to the way that the program expects them to be flown. When you file a flight plan, you file A -> (sids, stars, ect) -> B. The flight plan terminates at the final airport, and the actual approach is never mentioned. When in the air and approaching the destination airport, pilot2atc says "Expect the ** approach with the ** transition", which in RW tells the pilot to look over the charts, frequencies, etc, but does not change that the aircraft is still flying directly to the airport at the end of the flight plan or star. What it implies is that vectors will issued to int…

Hi Dave. I just picked up ASXP. I know it just came out, but curious if there's any way to use the current P2A built in settings for Active Sky with ASXP - or if it will require an update? I nosed around a bit and couldn't find the snapshot file that P2A references for the setting - so I suspect it will be different in X-Plane and require an update. Is this a feature that you'll be able to incorporate into X-Plane? Thanks!

Hello Trust me I have tried to get Pilot2ATC on the client computer to pick up my yoke switch when I press it on the P3D (host computer), without success. On the host computer using FSUIPC Options and settings button tab, moving my switch is recognized by FSUIPC as Joystick 0 and button 0, then I use Keysend 1-255 (Widefs) as recommended. This where I need assistance, on the client computer. The wideClient.ini file is there any need to write under (User) Keysend1=123,16; Press F12 etc, as I have no need to press F12, I require Joystick 0 button 0. Back to P2A setup Btns tab, set PTT joystick,my joystick is not found or listed. But when I had…

Hi, Seeing how I'm back into flight sims, and I was really happy with the demo when I tried it back then, I'm just about to pull the trigger on p2atc. However, there's something I would like cleared out before I do: Back when I was trying it (2.5.something iirc), p2atc would have the annoying habit of "snapping" into the comm decimals for me, which was driving me *nuts*. I would try to move it past a point but it would snap to the previous frequency, sometimes even moving the decimals back a number, and it forced me to scroll up, wait for it to snap, scroll up, etc. That made changing frequencies really cumbersome and I couldn't find an option to disable it. …

Hi, I am building a home cockpit. It's based on a Cessna. It still early WIP, but it's already fun to fly. I made a short video of it. I use Pilot2Atc.

Hi. Can anyone suggest a fix to this? I’m using 2.5.05. When I set the Saitek Yoke PTT button all seems well. PTT indication only comes on when pressed. Problem is it stays on once the physical button is released and pressing again doesn’t seem to have any effect. I have a CH throttle button set up as a workaround, I’d love to get the proper button working though; at heavy workload times I need three arms to operate the PTT on the throttle. I have checked and the key is not assigned in Spad.next or FSUIPC Very grateful for any suggestions

hi how can recovery my registration key please