Pilot2ATC Users Forum

any way to get pilot2atc to open on requested monitor every time its launched, using 6 screen setup with amd eye infinity controlling them launching addons via sim starter ng starts fine just not in the sceen i want also incorrect sizing hope this make sense cheers

New user of pilot2atc and I upgraded my Airac to 2005 recently. I am trying to fly out of Gatiwck (EGKK) and have noticed that despite Navigraph charts and Pilot2ATC being on the same Airac cycle there are some big differences in the SIDs for EGKK. Navigraph have confirmed that there are some changes in this cycle. I am interested to understand why pilot2atc has not picked up these new differences. Mainly Westerly departures from 26L and 26R have changed as can be seen in the screengrab below. Help would be appreciated. Daren

When I click on the stb freq in com the windows will not pop up. It used to work and then quit. Any ideas

hello, Quick question guys, how can I update pilot2atc navigraph thru fms manager of navigraph? I want to update to nav 2005. Thankyou.

Hi, I have loaded a FPL with a specific SID. How can I avoid it is changed to another SID when "File" is selected? "Force Pilot Runway Selection" is ON Regards

HI I've downloaded the program for the 10 day trial and followed the installation instructions with regard to speech recognition set-up (Windows 10) etc, re regional settings etc. I am able to get P2ATC to connect to both Xplane11 and P3Dv5 (I get the three lines on initial connection). However I am unable to get the program to recognise me even though the PTT button goes green when I press the button and I use the default callsign and follow prescribed statements. I've completed the grammar training and the microsoft windows that appear recognise my voice, but the grammar window does not. I click on practice, I get the prompt and the button changes …

Hi guys i have followed all instruction on the PDF manual, got my XPUIPC set up done as seen on my screenshot, can someone help me pls who ever encountered this connection problem. TIA, https://imgur.com/p6WgpUz https://imgur.com/yNHKJwT

Hi Everyone Can some one please advise -I planed a flight in PFPX -loaded into pilot2atc. selected sid/star and exported to pmdg 777 fmc. After few minutes into flight the pilot2atc starts saying I am off course. Plane is following fmc but its off course on the atc map. I have same airarc etc. This has happened few times. I am still on trial version. My thanks in advance for all help. Qas

I have the opportunity to create a network and use a second PC. Would I be able to run P2A on the second computer to take some of the load off the computer running XP? I'm completely word not allowed about networking, so please keep the answers simple. 🙄

Hi everyone Thanks to Dave I have the program running now. I am ok with the ATC procedure at the start of flight.. ie. Clearance request. Push back/ push back engine start...taxi.. Can some one please advise what is the sequence after this. At runway holding point it only advises take off...it does not say line up ...etc. I used Proatc x. And this always says line up etc.. Also during flight it stays mostly silent. Finally can you please advise the steps when near destination airport. What do I choose from the approach option for ils landing. Many thanks . Qas

Enroute to KMGW & KHOT between HYK & GQE Memphis Ctr is on 132.1 and so is KJOD AWOS. Is there a way to get P2A to match all X-Plane 11.50b4 data? I am also noticing many of the Airports I have flown in the last five days from the USA to South America, the Taxiways are way off! Do I have to load and save each airport Taxiways and Gates then press save to update P2A? Thanks, Scott

The tower tells me to take off, but there is ai aircrafts in line for take-offs and aircrafts on runway. Is there something I can do about it? Is p2atc able to fix this in coming updates? And also; is there a radio filter for voices?

How do I use P2A in the most realistic way? In real life are flight plans filed with a STAR? Or is the STAR only assigned at the last part of the flight? If I don't let P2A auto complete procedures I only get vectors to the ILS, never an approach. Should I just plan the flight and file it including the STAR and program the FMC, then during the flight when ATC gives the approach check if its the same or if it has changed then reprogram the changes in the FMC? How is this done in real life?

Hi Dave, I hope you are well. I was wondering what the path forward is for getting P2ATC up and running in P3Dv5. I hope we can keep both P3Dv4.5 and P3Dv5 running concurrently as it will be a while until v5 has everything we need to obsolete v4.5. I have both installed on my system and am making very good progress with all my installs into P3Dv5. Any input would be appreciated. Stay well Joe

I have a problem of getting the Say it Help window (the small one) on top of the screen. When I click on the simulator screen the Pilot2ATC window goes back and again I cannot get the help window even if I press the hot key I assigned in the config button tab. What is the best way to keep the Pilot ATC large window away and keep the samll help window on top ?

Hi everyone. I hope everywhere everyone is well and safe with their loved ones. I am new o P2Atc--proatc x user. I am trying to make it work but struggling with the sayit function.I have installed English USA pack . I have reinstalled,and running under administrator. I think I am missing something in my understanding. I am getting no response when I press PTT either. I do not use voice command-I just need to have the sayit running. Also do I need to click something to make the copilot do everything. I would like to buy this as it has some other good functions-but the way things are it looks a big no no. I look forward to your…

I have created a flight plan in Pilot2ATC and want to export it to my GTN 750 for P3d V 4.5. I can't find the folder to direct Pilot2ATC to save it in GFP format. Can someone please tell me the correct location. So I can then load the flight plan from the Garmin catalog. I've saved it to 😄 Lockheed Martin/Prepard3D v 4/F1GTN/FPL. The Garmin does not see the flight plan. Thank You. Bill McCracken

How to move pilot2 ATC to a new drive of the same computer without changing the Config. Settings. I am an evaluation user. I have used the plugin for few days now and I am quite happy to purchase it. But I have initially installed on a temporary drive for testing. I want to have the plugin in my drive having my Sim installed and I want to keep the changes I have done to the config. settings.

Hello! I create flight plan LYBE-LYTV. Was a very anoying instruction until VAL waypoint. ~ Expedite Climb to Flight Level One Three Zero AIRSERBIA One Eight Two AIRSERBIA One Eight Two Descend and Maintain Eight Thousand feet until passing Victor Alpha Lima ~ Descend and Maintain Eight Thousand feet AIRSERBIA One Eight Two AIRSERBIA One Eight Two Climb and Maintain Flight Level One Three Zero ..... Thanks for your help. Attila

Hello, I am evaluating Pilot2ATC on the 10 day demo. Today I flew to a big international airport with a 777-300 ER and I was assignes a VOR approach. Is there a setting where Pilot2ATC assigns always an ILS approach whenever it is available? Thank you

Are we waiting for an update?

When at PANC the radio in P2A is initially tuned to Z41 Tower. I have tried all of the Clearance Delivery radio frequencies that I found on the internet and none will allow me to "Request IFR Clearance"'. I Connect OK between P2A and X-Plane 11, so I must be doing something wrong. Any help is appreciated. Thanks!

I have downloaded the demo with the aim of purchasing the full. However I am running into a number of problems. I have my mic set up, I've installed and set as default US language pack, I have managed to connect to xplane without issues but trying to interact with atc does not work. Even when I attempt to use the 'say it' and 'help' functions to input requests it takes a very long time, 5 mins or so, for a response. But it is the grammar help that is posing the most problems. When trying to practice and i speak the request the program just hangs and i get 'not responding' notification. I have to close the whole thing. Similar happens with the Train mode, I never get the w…

I just got done from a flight using Pilot2ATC and before entering pattern to land adjusted altimeter to match what "Say Weather" told me. I did not check the atis until after I had did a very bad landing to see the altimeter was telling me the airport was 500 feet where it is really 726 feel. What would cause this? I have to admit this is the first issue I have had with this great program and use it on almost every stream. Thanks Bill

Hi dave, suddenly unable to file flight plan like before , don't know what happen in P2atc. after validate my flight plan and try to file as usuall P2atc crash !have been using P2atc over 2 years nothing happen like this before ,but i did reinstall traffic global yesterday but they both running well before til this morning ..how do i start to check... pls advice thanks in advance...