Pilot2ATC Users Forum

Where are the settings for the Voices tab in the configuration stored? If possible id like to save different versions of voice configs to represent different regions.

I have an active navigraph subscription and updated Pilot2ATC. I am currently on cycle 2113. This is shown in p2atc Data as AIRAC cycle : 2113 Version : 1 Valid (from/to): 30/DEC/2021 - 27/JAN/2022 Forum : http://forum.navigraph.com Data provided by Navigraph - www.navigraph.com - Source data copyright (c) 2021 Jeppesen This data may be used for ground based recreational computer game simulation software only, and may not be recompiled, interpreted, or distributed for any purpose without the written consent of Navigraph. The contents of this database is dated and must not be used for real world navigation as it is unlawful a…

Hello Dave 🙂 P2A v2.6.2.4 PublicBeta2f If I show my license keys in the "P2A Setup", the "Hardware Id" part is wrongly presented in the window. Of course here I have hidden my license keys, I just show where it is written.

What weather setting in P2A should I use if I'm using a preset in MSFS?

All seems fine until I file the flight plan then P2A freezes any ideas please

Hello 🙂 P2A v2.6.2.4_PublicBeta2e - AIRAC Cycle 2112 I have a problem with the VFR flight plans: For example with the LFRZ/NTS/LFEY flight plan and the RNAV 32 transition GIGEX approach, I can validate this flight plan in P2A, but when I want to transmit it (File function), the "File" button does not turn green. I also have this problem with other VFR flight plans. If I request VRF clearance, I always get the message as shown in the screenshot below ("say again request with destination airport") I don't know what the problem is. Note: with P2A release v2.6.2.3-r2 and AIRAC 2112, the transmission of the VFR flight plan is fine, the "File" button turns…

If i turn up ivona voices from default 75% to around 90 or above it crashes P2A. This happens in both current and beta versions

Hi guys, With MSFS, is there a way to map a spare VR controller button to activate the PTT feature of Pilot2ATC please? I'm using the HP Reverb G2. Thanks.

I've run into this with several airliners so I dont think its a true vs magnetic north thing. I regularly have ATC telling me to expedite my turn to XYZ even though I'm already on that heading. Guess is that winds are somehow involved in it. I do have P2ATC configured to use AXP (X-Plane) to match the sim itself. It's not a huge deal, but does get annoying when ATC keeps repeating instructions I'm already on or tells me turn left to XYZ when I'm already left of that particular direction.... Running latest beta if that helps.

This happens on most flights. I want to hear everything through the computer speakers and not the headset at times. I receive the initial ATIS (great) via the speakers, including the Ready to copy. Then I ask for Pushback and Engine Start and that comes through the headset. I get to runway for takeoff and that comes through the PC speakers again. Take off and all through the flight via speakers (great again). Then... at TOD I always get the EXTENDED FINAL (which is always through the headset all the way to landing) Why does some of the flight switch between headset and PC speakers. One last thing....most of the time ATIS is heard at startup and other tim…

I have had P2A for over a month and yet and have not been able to make it work for me, even using the most basic setup available. I have followed the actual user's manual and guides and found them very incomplete, for the most part. I will refrain here from adding countless forums I visited and videos I watched in search for answers. Unfortunately, none of them have giving me a clue as to how to make it work the way it should. But I am deviating from my actual problem. So please help me out to find some sort or compromise or solution to make P2A work for me. I begin by having beforehand the SIM running at the world screen along with FSUIPC7 with a blank airport and …

Hi, I'm using Pilot2atc as my "main" ATC program,but I'm using second one which is built in World traffic 3.5 ATC. Reason for that is that P2a doesn't recognize WT3 traffic, so I'm using WT3 ATC just to alert me if there is traffic on runway etc. My problem is that frequencies for the same controller are different in p2atc and in wt3 atc. Example: Gatwick tower frequency according to Navigraph is 124.230. In wt3 atc is correct frequency number ,but in p2atc is 124.225. So when I dial 124.230 in aircraft's radio it automaticly changes to 124.225 so I can't hear wt3 atc. Is there any setting in p2atc so I can change frequency to 124.230? But best solution wou…

If I miss a way point because of some unforeseen problem how can I ask for a permission to go to my next way point on my flight plan. The speech assistant only gives you a hint on how to ask for a "direct to airport".

It seems lately after I have everything setup and ready to go the Interface disappears and I cannot get it back. It iS running in the backgrouns but I cannot access it by using my usual "ALT-TAB" function. Any ideas, I did delete and rebuild the "Appconfig" file and will retry again. Any ideas would be helpful though. Great product! Regards, Tom

Hi, Not sure if you're aware of this or not. When i launch p2atc (latest release or the latest public beta), when the app comes up the first time, the street map view is all blurred out like nothing loaded. The only way to get it to display is to select a different mode like topo or satellite view, then switch back. at that point, it draws correctly. Joe

Hi. Just heard about P2A yesterday and I love it so far with MSFS2020. However, when selecting SIM weather I constantly get either weather not available or incorrect weather such as 29.92 when its really 30.20. Also, even though P2A cant control the traffic it sees information about it such as its departure and destination so does it interact with it in a way other than traffic reports? For example, sequencing me behind planes already on final. What traffic alert settings do you recommend for me flying VFR in single engine planes? The 15nm 5000ft alerts pile up even when distant from an airport. Thanks :)

Hi, my issue is if there is a lot of traffic generated from wt3,pilot2atc stops tracking ai planes or it just doesn't see any planes. If there is small number of planes it usually works ok but not always. In x plane map there is visible traffic .. Is there any solution for this problem? I must add that when I tried and installed traffic global everythin works ok but I prefer wt3. I use latest beta of p2atc. Greetings

Hi, I purchased the license yesterday and after applying it, the interface is gone, I can't see map, nor the flight path. Tried reinstalling but nothing works, can you please help me out on this?

Just today make a flight from LEZL (Sevilla) to LXGB (Gibralatar) with cruise alt of 15.000 feet When pilot2atc told me the vectors for final approach he didnd't told me to descent until i was very near of detination airport and then it told me to descent to 3000 feet , but i can't do that because i don't have enough distance to do that i am to near of airport Any solution for that , i think is better if ATC start the descent before when you have enough time to do the descent and arrive to the final approach with correct altitude thanks

I am using the latest version since last week or so; it has never given any appropriate taxiways, for me they are consistently incorrect; basically there is no upfront guess I can make as to how it expects me to taxi for runway. I have updated the database with latest AIRC data. So what I see from airport map in navigraph is totally different from what the controller tells me. What could be going on here?

I have been flying MSFS in Africa and South America lately and frequently NOAA does not have weather for the airports I am using. If I try to use Sim Weather, that looks for it in the Xplane folders. Nope! So I start a flight plan in MSFS and it shows the wind for departure and arrival. So I go back to P2A to set runways appropriate for the predicted winds. But P2A frequently will not change what it set when I first selected the airport. When I check P2A weather, it says Weather Data Not Available, but also says runway 27 in use. So it forces me to use 27 when MSFS says that I will be getting 09. Try as I might, I cannot get to P2A to change to runway 09. I have the …

I'm new to P2ATC. I think it's going to be a good training device for me. By following the experiences of others, I was finally able to get speech recognition working with the program. That's the good news. The bad news is that when I hold down the mapped PTT button to issue a command for ATC, within a couple of seconds, one of several other Windows or desktop apps popup on the screen trying to use the same information I am speaking to P2ATC in a search using the results of my spoken words in their input boxes. Needless to say, it is disconcerting to have windows popping up in front of you when you are flying an airplane! The only command mapped to the PTT on the El…

Hi, I have tried taking off from Heathrow (EGLL) a couple of times now and I have consistently encountered the same weird behaviour. Ground ATC will clear me to FL150 right away, but then when I go to the Radar Director around Heathrow, he will ask me to descend to 3000 feet. This seems like a bug. Sincerely, Michael Hansen

Hi Dave, I've imported this plan source from Simbrief: LIPE LOMED L12 TINTO Q710 GITRI Z924 KOLUS M603 MOROB LIEA. Simbrief gave FL290 as cruise altitude and P2A set FL 280. If I try to set FL 290 manually it turns to FL 300 so is it impossible to set the right cruise flight level. It's a bug or may I check something in Config? Thanks in advance for any support. Alessandro

So I started the trial today after watching numerous videos and got pretty excited about using. I have one main problem thus far and this is it. I use sound from plugged in speaker into PC. Realtek If I choose Primary Sound Driver within P2A I can hear fine, and get responses if I use the "Say it" option. My mic is a USB condenser mic and is my primary microphone. This input works in P2A if I unchoose primary sound driver, and choose USB mic and then P2A picks up my voice and responds, the problem is, if I have this chosen I can no longer hear audio from P2A. I would almost expect an input AND output sound option, but that is not the case. Can anyone g…