Pilot2ATC Users Forum

Hi Dave , can you fix STAR CANTO3C from LEAL? thanks

Hello all, FYI for those wanting additional voices, Cereproc are offering a 50% discount on their site with code HOLIDAYSAREHERE21. They are pretty good quality I have to say.

Dave, Is it possible to increase the font size in the speech box?

Hello. I’m running with satisfaction Pilot2ATC on MSFS 2020. Just one quick question: is there a way to get the copilot auto-responding for traffic alerts? I intend the copilot could respond automatically (“traffic in sight-<call sign >) when the ATC inform about a traffic alert, like copilot auto responds normally to other ATC conversations. Kind Regards.

Hello Dave How are you? I have a big problem, possibly because I can't use it correctly. I generate a complete flight with the corresponding SIDs and STARs generated by your program and once I manually select clearance, it gives take-off authorization, but then it no longer connects with center or approach automatically, unless I do it manually. It happens to me with all flights. I am determined to buy it, because I am with the demo, but until I have this clear, I will not buy it Can you tell me what I'm doing wrong? I use the a320FBW Note: I have configured that the copilot change the frequencies automatically Best regards Ramón

I noticed with the new beta when i get my taxi instructions atc tells me the Radar Control frequency i am still learning a lot and am not sure when i need to contact Radar and what i need to contact them for as if i dont change the frequency i still get handed off to the tower

Hi Dave and all, I have maybe found a bug or I am doing something completely wrong. Right now I am flying in Asia (China), but I have experienced the same in the US. My folder for the ATC Chatter is /Sounds/ATC Chatter/Countries/ and in here I have US for USA subfolder and Z for China subfolder, where under here I have App. Clr, Ctr, Dep, etc. But when I actually fly in China (Around Chengdu), P2A expects the following folder structure GetATIS 11:35:09 ControllerFreqChanged: 126.45. CtlrShrtName: ZUUU ATIS CtlrType: ATIS11:35:09 No controller assigned 11:35:11 Gnd ChatterFolder: C:\Pilot2ATC_2020_x64\Sounds\ATC_Chatter\Countries\Gnd ControllerFreqCh…

Hello all, I have installed P3D and MSFS on my new pc and installed the latest FSUIPC. I installed this file "Pilot2ATC_Update_2623_x64_R2" and got the app registered, but I get a message on startup: But the program starts up after I close the error, and Navigraph sees the app and updated it to the latest data. What did I do wrong? Did I install the wrong file? If so, what should I do next? thanks, Rob

Amazon Poly comes with a lot of voices from different regions. It would be nice to setup Pilot2ATC to use different voices in different regions.

Hi Dave i am back again i have now done a clean install of windows 11 i am trying to use the Language Trainer clicking on any of the full training and clicking train dose nothing i had the uk language pack install but also tried the us pack and they both dont work for me any suggestions?

I tried to test it with 15 days trial, but never get it connected to x-plane 10.30/32 64. Tried to remove all plugins, tried on default scenery, in EU, US no difference. Just when i press connect noting happens just stays grey and when I hit test it says not connected to sim. I have 3 days more and I realy want to at least try it. XUIPC works and have no problems with other addons like efass.

Dave can you fix the strange SID Rwy24R (MERO3A) from LEPA ? i am using 2.6.2.3 withh 2112 airac thanks I think the JOA DME-7 waypoint is incorrect According to real charts , this is the correct MERO3A SID Same for LEST SID Rwy 35 mega3B According to real chart this is the SID But the SID in pilot2ATC is a simple straight line Hope you can fix that things easy Thanks Dave

Hi, my issue is when I am near TOD pilot2atc freezes and I have to end it in task manager. I think it freezes when I should get STAR and approach instructions. When I restart pilot2atc and continue my flight it works normaly. In settings I have unchecked force pilot rnwy selection and auto load recommended procedures. Here are two logs from two seperate flights. https://drive.google.com/file/d/1QyFpELEj8GT2ORH4znSy6fwV-A4MIaj6/view?usp=sharing, https://drive.google.com/file/d/1fpl8iWmAQEZ6vH-EMtLi_KLk6-HDoahT/view?usp=sharing

I was looking at this software. Is this software able to manage the AiG injected airplanes? Is in general this software able to put in holding the airplanes or it uses the "go around" procedure? Another question: Is this software able "to close the airport" and consequently to divert the planes due to bad weather conditions? I'm asking too much 😁

Sim is connected, flight plan is validated and filed, PTT button is working. When I try to request clearance I get no response. I tried the listen function and P2ATC is not picking up my voice at all. This mic works fine in every other game I have and is properly set up. What am I missing here? Program is useless for me like this. Even the sayit isnt working for clearance.

I am in the trial period of your great software and I am wondering if it is possible to resize the speech window? Especially horizontally.

Hello pilots, Have a question about Pilot2ATC and from the title you can probably guess what it is. I've tried demo version and really liked how it worked with AS CRJ in MSFS and some GA aircraft, so thinking about obtaining full license for it. However, my job required me to leave my home for few months and while most of the gear travels with me for flying, unfortunately internet doesn't 😔 I do have access for it, but it's supper slow and unreliable. But it's enough to launch MSFS and then I simply switch it off. I know that Pilot2ATC also needs internet for activating it and starting, but maybe it would run later without internet after lo…

I create flt plan with simbrief and then import in to p2atc. I then export to MSFS. I then load the saved plan and everything looks great. As soon as I try to select the departure gate from dropdown, the entire flt plan changes. I had not had this problem with earlier sim updates. I believe is it combo of FBW plane and Asobo but not sure. Anyone have workaround/solution?

I am not sure if P2A sees the weather but was wondering if I could still request a course deviation to prevent flying in cloud I tend to fly a lot of GA aircraft

I have installed 2.6.2.4 b1 and I am having volume problems. Headset volume is fine in everything, Have not changed anything in P2A but all the responses are too quiet to hear. volume settings are at 100, but no change. Can I be missing something? Voices are fine testing through voice settings Windows 10 settings, it's just P2A that's too quiet...

In multiple landing situations, I've been told to go around due to an alleged plane being on the runway. In all instances, it turned out that there wasn't a plane "on" the runway per se. However, after checking the P2A map icons, there clearly were planes on the parallel taxiway and one holding short. I do have airborne traffic alerts set but these aircraft were on the ground as indicated by the blue icons. Could the presence of those other nearby aircraft been the culprit for the go arounds commands by ATC? If so, would turning off traffic alerts remedy it? I have the latest version of P2A and have the traffic link enabled.

is it possible when when adding a flight plane i normally import from navigraph using clipboard to assign the gate you will be given when you land at the arrival air port i know the gate may be in use when i get there but wanting to just have an idea of where i will be taxing to

Hi Dave, where is this new setting to choose between the two options for callsign pronounciation? Can't find it in the recent beta.

I am unable to successfully start p2a on my pc. I get an error box and it freezes at 20%. The gist of the message is that P2ABaseData.mfd failed. I changed the install location from C to D due to size limits. Any help will be appreciated.

Hello, I'm loving to use p2atc on every flight (MSFS2020-FBW [A32NX]) and take care (edit/config twys, rwys and gates in txi mnt) of all my airports (payware and freeware), because I like to do simflights as realistic as possible. I'm following the rules from the documentation regarding twys, gates, rwys, holdingpoints... Yesterday I installed the LSGG Payware Airport from Redwing and before fligtplaning and entering the cockpit I customized the airport data fpr LSGG in taxi mnt using the actual charts from Navigraph (Jeppesen Airport and Parking Stands for LSGG). LSGG uses two, lets say "Main TWYs" called "OUTER" and "INNER" in front of the Terminals and…