The Official DX10 Scenery Fixer Support Forum

After the DX10 fixer installation the DX10 Controller requires the FSX path setup (tool pos. 1) definition. Is it possible that the DX10 Controller will automatically find the right FSX path? On my PC the FSX path is located in a subfolder in D:\ , so I have to browse it manually which is not a problem at all. It is only a tip for a further improvement. Wulf

Why is this program asking for a registration key? It did not do this before. I'm almost at the breaking point with FSX. Jose

After numerous switching between DX9 and DX10, I had really poor performance in both modes. So I accused Dx10 Fixer naturally. :rolleyes: I deleted fsx.cfg yesterday, and gave Fixer another go, and had performance problems again. Lot of stutters, lower fps than in DX9, FPS at high altitude tends to zero, literally (at ground ~60fps), all because of AA. Took a detailed look at my new fsx.cfg and saw that I had TWO entries for my graphic card: [DISPLAY.Device.NVIDIA GeForce GTX 560 .0.0] Mode=1680x1050x32 Anisotropic=1 AntiAlias=1 [DISPLAY.Device.NVIDIA GeForce GTX 560 .0.0.0] (something like this) Mode=1024x768x32 Deleted the second one of course and voilla,…

Hello all, I know it wasnt compatible before, so i installed Fixer and POSKY 777, exterior is ok. However at night, all gauges are gray and windows are opaque in VC, when interior lights are closed, gauges are fine. Did i miss any setting in Fixer or it's because of the aircraft ? (I have the same issue with CLS A330) Thanks

Hello, I guess the title is clear. I am getting issues I never had before, like hang ups, drops of framerate (10 vs 30). Oke this is my system: MSI 67-mainboard Core i7-2600, @ 4.2 ghz, hyperthreading switched off 16GB memory DDR 1333 SSD Nvidia GTX 580 Monitor 1920*1200 I guess not to bad. FSX is set to a framerate of 30fps. FSX consist of SP2 Several Carenado planes Several sceneries (ORBX, Switzerland Pro) Other sceneries from Germany, Austria and the Netherlands. I am using Rex Essentials +. Under DX9 the FPS where between 27-30 and regular and over areas with NL2000 it could drop to 15. Or even worse. Fullscreen or windowed does not really make a differenc…

Hello! I have this incredible addom, and I am terrible happy with it when there are not clouds around. I have a 4.2ghz CPU with the Nvidia 780 and goes smoothy well fixed at 30fps.. PERFECT BUT when there are clouds.. AND rain or fog.. I have a descent of FPS to 14-16 or so Investigating more on this issue.. it seems that clouds in dx10 makes AA when we set it in FSX.. and I have to in FSX to let have AA in the plane buildings.. etc.... Seems that there is a problem with the cloud shader in dx10.. something that it doesn't have in dx9... and never happened to me. If I switch off AA, then I have back my lovely 30 fps... Is there a way to solve that cloud shade…

I bought this DX10 Fixer having the impression that it would work with my MAIW AI traffic however after installing and setting up the fixer none of my MAIW Traffic are even showing up in the sim. I was maybe expecting untextured models if I had a problem but the models themselves are not even there. They're just all gone and the ramps are empty. The way I understood it these would be legacy aircraft and would still work fine with the DX10 Fixer? Is this not the case? Brandon

Hi i have the DX10 fixer Order #FSS0235500. I cant get the PMDG 747 to work in DX10? Is there any fix? Thanks.

DX10Fixer has worked wonders for my FSX and I am so thankful for it. My issue is that the 'Water Shader' and 'Rain Shader' options are grayed out because i have altered versions of those files. I would like to restore them to the RTM default so that I can utilize the water and rain shader options. I am not sure exactly what files i need or where they should go. Any ideas would be appreciated...

Steve, Can you explain what this means? Thanks! J

You can find it here.... Enjoy!! All the best,

Hello , Is this plane fully compatible in full screen mode in DX10 Scenery fixer except the bubble infos which never work with DX10 Scenery fixer? Thanks for you help!

Hello, Is it necessary to use UIAutomationCore.dll in DX10 like In DX9?

I have a problem with the locked version of the RAAS supplied with the Aerosoft Airbus. On running FSX I get a message saying it is not recommended to use RAAS and indeed if I click yes to use it the FSX crashes. If I say no the FSX works fine but without the RAAS. The FS2Crew support suggest I may have a corrupt Simconnect file and need to install the SP2 or Acceleration pack . From what I understand I would need to uninstall the Acceleration pack and reinstall it which I understand will rewrite my FSXConfig file. My reason for explaining this is will I need to reinstall the DX10 scenery fixer after reinstalling the Acceleration pack Thank-you. Michael

Always when I start FSX even before I switched to DX10, When starting FSX I get this message: The color scheme has changed. The following program has performed an action that requires Windows to temporarily change the color scheme to Windows 7 Basic. I have always noticed my colors in all virtual cockpits in all planes look faded. Anyone know anything about this? I do not have any external shader files installed except the ones installed with Steves dx10fixer.exe. The message says when FSX closes it changes back to Windows Aero. Paul

Hi guy I am very frustrated dx10 sf (scenery fixer) and now my jetways are not showing completely, don't get me wrong the product is great it fixed all my scenery errors but really need back my jetways as it is very unrealistic playing without them (most you serious simmers will understand where I am coming from about the realistic-ness) I have tried everything but I think its something in my cfg file. it is showing the beginning of the jetways but not the part that connects to the aircraft. please help really frustrated. since I got x I have been dealing with errors more than I have been enjoying myself flying.

Am I the only one having problems installing this software? Despite having all the proper registration information, I am unable to activate online. I am constantly being told I need to connect to the internet. Whatever. So my only other option is to do the manual activation. I run the wrapper as administrator, choose manual validation and proceeding with the generation of the offline validation export file. This .fsc file is successfully created and kept in the folder with the downloaded executable. The wrapper then proceeds to successfully install the application, and to repair Microsoft Visual C++ 2010 x86 Redistributable to it's original state. There is NO…

I've been enjoying DX10 with FSX ever since it's been discovered that it can be successfully used. But, I'm encountering this phenomenon that I'm too happy with. I'm not too savvy with terminology, but I will assume my disappointment is with "bloom"? The sun, I can live with ... the runway lights OK, but one would think that the lights were reflecting off fog or something. What I find very distracting, is the ground illumination of streetlighting, building lighting etc from the air, and the blob of light from the illuminated city on the horizon. I wasn't able to get a picture, but an AI aircraft flew across my field of view in pic #2 above. It was a …

Ooops... a lot of George Diemer's Fs9 Sikorsky S-40 is now transparent. It was fine in the previous revision so I guess a reinstall of that revision is required.

Hello, It is strange since i updated the soft every time i install new aerosoft sceneries when i launch the fixer it never ask me a scan!! Is it normal? or something is wrong?

And it's a positive one! CTDs, OOMs and OOMs alert from FSUIPC belong to the past! :Party: Landing with PMDG 737 NGX at Aerosoft EHAM, FsDreamteam KLAX and UK2000 EGLL was not possible with DX9. Now even with bad weather i could have low fps but no OOM alert! :p0504: Also i don't use IOBIT's Game Booster anymore! Colors and visual depth of sceneries look so real! The shine of the sun with bloom look so real too! The only downside is "moving" jagged lines of jet panels at zoom 0.70. Congratulations and big thanks to genious Steve :p0310: (who i believe he will continue to surprise us in the future) and Paul! :clapping: :im Not Worthy:

When I revert to DX9 by uninstalling the libraries I now get a series of was 2 error messages related to effects files, specifically fx_navred.fx and 14 other lighting effects. It doesn't actually seem to cause a problem and the files are there in the backup and in the main effects folder. If I restore these files from an Acronis backup I made a couple of weeks ago to the main FSX effects folder, delete the DX10 backup folder and reinstall DX10 Scenery Fixer the same thing happens. This has only started since updating to build 24. As I said the files are definitely present, I'm just curious as to the reason and would rather not have to click 15 times to get rid of the err…

Hello, I am testing Heraklion X from Aerosoft and 3D Grass is horrible if i activate it! Is there a solution or do i have t desactivate it definitly! The rest seems to be ok! I have tried to move the legacy slider left but it is the same!

Can anyone advise as to where I might be able to get the original FSX DX10 Water Animation file(s) from?? I have over the years, used REX, FEX etc and installed numerous different texture sets - I have never bothered to back up the original FSX files as I (like many of us) had no idea that anyone would have the ability/skill/perseverance to "fix" DX10 as the Scenery Fixer has done, and that the original may be required again!! I'm just trying to cover all my bases, and have seen that some users have gained performance from reverting back to the original animation. What is/are the file(s) called? Where can i get it from? (i.e can it be extracted from my dusty …

I'm not crazy about the effect of the VC shadows generated by the new General Shader in V1.1 I'm getting a an ugly gradient effect on panels and instruments in my small aircraft. I've uploaded a before and after of a section of the cockpit of the default F18. I'm using the same settings as in the previous build. Is it me? I've gone back to to that build for now since I'd already developed workarounds for the other fixes that affected my install, but I'd like to stay current if I can fix this.